Log NC (NC Data Entry)

You use this activity to log NC codes against one or more selected SFC numbers in the POD.

Rules

The following table describes rules and settings that you can change for this activity (NC_DATA_ENTRY) in Activity Maintenance:

Rule	Setting
ALLOW_PARTIAL	YES: The partial quantity processing of SFC number in the POD for immediate scrap is allowed. NO (default): The partial quantity processing of SFC numbers in the POD for immediate scrap is not allowed. The entire SFC quantity is dispositioned.
AUTO_SPLIT	NEVER (default): Does not automatically split off partial quantity of an SFC for nonconformance dispositioning. ASK: Presents a dialog box that allows the operator to split off partial quantity of an SFC for nonconformance dispositioning. Applicable to routings with or without relaxed routing flow. ALWAYS: Automatically splits off partial quantity of an SFC for nonconformance dispositioning. Applicable to routings with or without relaxed routing flow. Note For auto-split to work, the Copy NC Data system rule must be set to true (see Serialization Rules). End of the note. For more information, see Relaxed Routing Flow and NC Dispositioning
PLUGIN_URL	Specifies the plug-in location in the SAP ME folder structure Default value:/COM/SAP/ME/NONCONFORMANCE/CLIENT/NCDATAENTRY.JSP Caution Any changes to the PLUGIN_URL activity rule setting in Activity Maintenance may result in incorrect display of the plug-in in the POD. End of the caution.
RELAXED_APPLY_TO_ALL	The Apply to All checkbox appears only if multiple SFC numbers have been selected in the POD or in Standalone NC Logging. YES: You can use Apply to All for multiple SFC numbers even if they have different characteristics such as operation, BOM, material, NC history, and routing. NO (default): You can use Apply to All for multiple SFC numbers only if they have the same characteristics.
WORK_INSTR_PLUGIN_ID	WI_LIST_DISPLAY (default): Specifies the Work Instructions List plug-in to be used in NC client where work instructions can be viewed

Note Note

You can set a wide variety of options for Log NC in Nonconformance Client Maintenance (see NC Client Maintenance).

End of the note.

Fields

The following tables describe fields requiring explanation:

Field	Description
NC Code	Specifies the NC codes to be logged against an SFC number
Comments	Provides the ability to log comments associated with this SFC number. Can be later viewed from the SFC Detail Report.
As-Built	Provides a link to As-Built Configuration where you can optionally remove and add components Note that this link appears on the screen depending on the settings defined in NC Client Maintenance.
Ignore Component for Highlighting	If selected, the Visual Test and Repair plug-in ignores the component name in the Component field in the NC Data Entry plug-in and only uses the value in the Ref Des field to find and highlight a component in the Model Viewer (see Visual Test and Repair (VTR) and Visual Test and Repair Plug-In).
Add	Logs a primary or secondary NC code
Add-Done	Logs a primary or secondary NC code, completes the NC Data Entry session, dispositions the SFC number (if enabled) and clears the screen
Work Instructions	Displays work instructions set in NC Client Maintenance Note that this button appears on the screen depending on the settings defined in NC Client Maintenance.