tape_address_ctl_arch 

This parameter is used by BRARCHIVE to define the control drivers for the mount or dismount commands. These commands cause the tapes to be mounted or dismounted when using a jukebox or autoloader ( backup_dev_type = tape_box|pipe_box ).

Default value: none

If this parameter is not set BRARCHIVE uses the drivers specified in the parameter tape_address_ctl.

tape_address_ctl_arch= <tape_driver>|(<tape_driver1>,<tape_driver2>,...)

<tape_driver>: Control driver address

Backup with Jukebox/Autoloader