Deprecated API

Contents

• Deprecated Exceptions
• Deprecated Fields
• Deprecated Methods
• Deprecated Constructors

Deprecated Exceptions

com.businessobjects.rebean.wi.InvalidParameterException
Since version 11.5, this exception is no longer thrown. Instead, a IllegalArgumentException, IndexOutOfBoundsException or NullPointerException will be thrown.

Deprecated Fields

com.businessobjects.rebean.wi.ReportException.AGGR_ON_AXIS
since 6.5.0, it is possible to put aggregations on a block axis

com.businessobjects.rebean.wi.ReportException.ATTACH_DIFFERENT_CONTAINER
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.QueryException.CANNOT_DELETE_LAST_DP
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ReportException.CANNOT_REMOVE_BODY
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ReportException.CIRCULAR_ATTACHMENT
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ConfigurationException.CLASS_LOAD_ERROR
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ConfigurationException.CONFIG_TEMP_FAIL
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.COULD_NOT_REACH_SERVER
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.COULD_NOT_WRITE_STREAM
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ConfigurationException.DOC_APPLY_FORMAT
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DOC_CONTEXTS
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DOC_CREATE_DOC
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DOC_DATAPROVIDER
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DOC_DATASOURCE
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DOC_GET_BLOB
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DOC_GET_LOV
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DOC_LOAD_SPEC
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DOC_LOAD_STRU
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DOC_OPEN_FAIL
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DOC_PROMPTS
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DOC_PROPERTIES
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DOC_REFRESH
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DOC_REPORTMAP
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DOC_REPORTS
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DOC_SAVE_STATE
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DOC_SET_NESTED
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DOC_SET_PROMPTS
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DOC_SET_PROPERTIES
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ConfigurationException.DOC_STORAGE
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ConfigurationException.DP_COUNT_FAIL
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.QueryException.DP_NAME_EXISTS
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ConfigurationException.DP_RESULT_FAIL
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DRILL_BAR
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DRILL_BEGIN
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DRILL_CREATE_REPORT
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DRILL_END
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DRILL_EXECUTE
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ConfigurationException.DRILL_SERIALIZE
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.DRILL_SNAPSHOT
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ConfigurationException.DRILL_XML
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.QueryException.EMPTY_QUERY
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ConfigurationException.ENGINE_TRANSFORMER
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ConfigurationException.ENGINE_TRANSLET
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ReportException.EXPR_NOT_IN_AXIS
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ReportException.EXPR_NOT_IN_CELL
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ConfigurationException.FILE_CREATE_FAIL
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.FilterConditionException.FLTR_NO_PRECOND_OPERAND
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.FilterConditionException.FLTR_NO_PROMPTS
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.FORMULA_ADD
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.FORMULA_REMOVE
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.FORMULA_UPDATE
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.FORMULA_VALIDATE
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ConfigurationException.FUNCTIONS_DICT_FAIL
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ReportException.HOR_ATTACHMENT_ON_SECTION
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.OutputFormatType.HTML

com.businessobjects.rebean.wi.AllAvailableFunctionsIdentifiers.ID_EUROFTOROUNDERROR
Since 12.0, use AllAvailableFunctionsIdentifiers.ID_EUROTOROUNDERROR instead.

com.businessobjects.rebean.wi.FilterConditionException.ILLEGAL_OPERATOR_ON_DOC_FILTER
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ConfigurationException.INCOMPATIBLE_XALAN
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.FilterConditionException.LIKE_OPERATOR_ON_NON_TEXT
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.MAP_EXPAND
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.MAX_SIMULTANEOUS_CONNECTIONS
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ReportException.MEASURE_IN_SECTION
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.FilterConditionException.NO_FC_OPERAND
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.FilterConditionException.NOT_ENOUGH_OPERANDS
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ReportException.ONLY_DIMENSION_OBJ
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ReportException.ONLY_MEASURE_OBJ
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ConfigurationException.OUT_OF_MEMORY
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.PROXY_CREATION_FAIL
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.RECORDSET_CACHE_ERROR
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.REPORT_GET_PAGE
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.REPORT_PARSE_PAGE
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ConfigurationException.SERVER_CONFIGURATION_FAIL
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.SESSION_CLOSE_FAIL
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.SESSION_INIT_FAIL
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.CommunicationException.SESSION_TIMEOUT
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ConfigurationException.STORAGE_CREATE_FAIL
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ConfigurationException.STORAGE_GET_FAIL
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ConfigurationException.TOKEN_CREATE_FAIL
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.FilterConditionException.TOO_MANY_OPERANDS
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ReportException.TWO_EXPR_IN_SECTION
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.FilterConditionException.UNABLE_TO_ATTACH_A_LOV
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.UserInputRequiredException.USER_INPUT_FOR_CONTEXT
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.UserInputRequiredException.USER_INPUT_FOR_PROMPT
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ConfigurationException.VIEW_PARSER
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ConfigurationException.VIEW_TRANSFORM
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

com.businessobjects.rebean.wi.ConfigurationException.VIEW_UTF8
This error code corresponds to a possible return value for REException.getErrorCode(), which should no longer be called; use REException.getCode() instead.

Deprecated Methods

com.businessobjects.rebean.wi.DataProviders.changeDataSource(String, String, boolean)
Use DataProviders.changeUniverse(String, String, boolean).

com.businessobjects.rebean.wi.DataProvider.executeQuery()
Use DataProvider.generateQuery() instead of this executeQuery. This method does not require contexts to be resolved, thus the resulting report dictionary can sometimes be incorrect.

com.businessobjects.rebean.wi.Attachable.getAttachTo()
use Attachable.getHAttachTo() or Attachable.getVAttachTo()

com.businessobjects.rebean.wi.DataProviders.getCanChangeDataSource()
Use DataProviders.getCanChangeUniverse().

com.businessobjects.rebean.wi.TableFormBase.getCellPadding()
Each cell now exposes a vertical and horizontal padding, so the preferred way to get the padding is by calling TableCell.getVerticalPadding() and TableCell.getHorizontalPadding().

com.businessobjects.rebean.wi.DataProviders.getChangeDataSourceMapping()
Use DataProviders.getChangeUniverseMapping() instead of this call.

com.businessobjects.rebean.wi.FreeCell.getContainsMacro()
The [page] and [pages] macros are no longer supported by RESDK.

com.businessobjects.rebean.wi.ReportEngine.getDefaultFormatNumber(FormatNumberType)
This method was deprecated in version 12.0.

Use DocumentInstance.getDefaultFormatNumber(FormatNumberType) instead.

com.businessobjects.rebean.wi.AdvancedCondition.getDimension(int)
Use AdvancedCondition.getFilterObject(int) instead.

com.businessobjects.rebean.wi.AdvancedCondition.getDimensionCount()
Use AdvancedCondition.getFilterObjectCount() instead.

com.businessobjects.rebean.wi.Query.getDuplicatedRows()
Use SQLDataProvider.getDuplicatedRows().

com.businessobjects.rebean.wi.REException.getErrorCode()
From version 11.5 onwards, use REException.getCode() instead.

com.businessobjects.rebean.wi.DataSourceObject.getLOV()
should use DataSourceObject.getLOV(DataProvider) or DataSourceObject.getLOV(DataSourceParameterValues) instead.

com.businessobjects.rebean.wi.DocumentInstance.getLOV(String)
should use DocumentInstance.getLOV(String, LovType) instead

com.businessobjects.rebean.wi.DocumentInstance.getLOV(String, LovType)
should use DocumentInstance.getLOV(String, LovType, DataProvider) or DocumentInstance.getLOV(String, LovType, DataSourceParameterValues) instead

com.businessobjects.rebean.wi.GraphAxisProperties.getMaxValue()
use GraphAxisProperties.getMaxValueGraph()

com.businessobjects.rebean.wi.DocumentInstance.getMediaDPI()
As of version 11.7, replaced by OutputPropertiesType.DPI_FACTOR

com.businessobjects.rebean.wi.GraphAxisProperties.getMinValue()
use GraphAxisProperties.getMinValueGraph()

com.businessobjects.rebean.wi.TableCell.getPadding()
Use TableCell.getVerticalPadding() and TableCell.getHorizontalPadding() instead.

com.businessobjects.rebean.wi.DocumentInstance.getReadPassword()
Document passwords are no longer supported.

com.businessobjects.rebean.wi.ReportEngine.getSessionID()
This method was deprecated in version 11.

com.businessobjects.rebean.wi.Query.getSQL()
Use SQLDataProvider.getSQLContainer() and SQLSelectStatement.getSQL().

com.businessobjects.rebean.wi.HTMLView.getStringPart(String)
use HTMLView.getContent(Writer, String, String)

com.businessobjects.rebean.wi.HTMLView.getStringPart(String, boolean)
use HTMLView.getContent(Writer, String, String)

com.businessobjects.rebean.wi.ReportEngine.init(Object)
This method was deprecated in version 11.

com.businessobjects.rebean.wi.ReportEngine.init(Object, String)
This method was deprecated in version 11.

com.businessobjects.rebean.wi.AlertersDictionary.moveAlerter(int, int)

com.businessobjects.rebean.wi.DataProviders.mustFillChangeDataSourceMapping()
Use DataProviders.mustFillChangeUniverseMapping().

com.businessobjects.rebean.wi.ReportEngine.openDocument(String, String, String, String)
Use ReportEngine.openDocument(int) instead.

com.businessobjects.rebean.wi.DataProviders.setChangeDataSourceMapping()
Use DataProviders.getChangeUniverseMapping() instead of this call.

com.businessobjects.rebean.wi.FreeCell.setContainsMacro(boolean)
The [page] and [pages] macros are no longer supported by RESDK.

com.businessobjects.rebean.wi.Query.setDuplicatedRows(boolean)
Use SQLDataProvider.setDuplicatedRows(boolean allow).

com.businessobjects.rebean.wi.GraphAxisProperties.setMaxValue(int)
use GraphAxisProperties.setMaxValueGraph(double)

com.businessobjects.rebean.wi.DocumentInstance.setMediaDPI(int)
As of version 11.7, replaced by OutputPropertiesType.DPI_FACTOR

com.businessobjects.rebean.wi.GraphAxisProperties.setMinValue(int)
use GraphAxisProperties.setMinValueGraph(double)

com.businessobjects.rebean.wi.DocumentInstance.setReadPassword(String)
Document passwords are no longer supported.

com.businessobjects.rebean.wi.Report.setReportMode(ReportMode)
This method was used as a workaround for a known problem in Business Objects XI and should no longer be called. Since version 11.5, calling this method has no result.

Deprecated Constructors

com.businessobjects.rebean.wi.ReportEngines(String)
Use other constructor