Summary

Errors which occur when implementing basic operations on allowances.

Error Codes

Select the error code signaled in the operation response replied by the SAP CC system:

Error Code	Message	Action
ALLOWANCE-1	The ID of the Allowance Plan is missing.	Add the ID of the Allowance Plan.
ALLOWANCE-2	The owner of the Allowance Plan "{0}" is missing.	Add the owner of the Allowance Plan.
ALLOWANCE-3	The description of the Allowance Plan "{0}" is missing.	Add a description to the Allowance Plan.
ALLOWANCE-4	The status of the Allowance Plan "{0}" is missing.	Add a status to the Allowance Plan.
ALLOWANCE-6	Error while validating the Allowance Plan "{0}".
ALLOWANCE-10	The Counter at the index {0} is empty.	Replace it by a valid Counter or remove it.
ALLOWANCE-11	The name of the Counter at index {0} is missing.	Add a name to the Counter.
ALLOWANCE-12	The name "{0}" of the Counter at index {1} is already used by the Counter at index {2}.	Change the name of the Counter.
ALLOWANCE-13	The Counter "{0}" at index {1} does not refer to a Counter of the Allowance Plan Item.	Link the Counter or remove it.
ALLOWANCE-14	The description of the Counter "{0}" at index {1} is missing.	Add a description to the Counter.
ALLOWANCE-15	The initial value of the Counter "{0}" at index {1} is missing.	Add an initial value to the Counter.
ALLOWANCE-16	The Parameter at the index {0} is empty.	Replace it by a valid Parameter or remove it.
ALLOWANCE-17	The name of the Parameter at index {0} is missing.	Add a name to the Parameter.
ALLOWANCE-18	The name "{0}" of the Parameter at index {1} is already used by the Parameter at index {2}.	Change the name of the Parameter.
ALLOWANCE-20	The type of the Parameter "{0}" at index {1} is missing or unknown (the supported types are string, number, date).	Add a type to the Parameter or change it into a supported one: string, number, date.
ALLOWANCE-21	The description of the Parameter "{0}" at index {1} is missing.	Add a description to the Parameter.
ALLOWANCE-22	Error while validating the Parameter "{0}" at index {1}.
ALLOWANCE-25	The parameter additional information "{0}" at index {1} is unknown.	Remove this additional information or replace it with a known one.
ALLOWANCE-26	The data type of the parameter is not defined.	Add this additional information or remove any additional information.
ALLOWANCE-27	The parameter is a mapping table ID but no mapping table class is defined.	Add the additional information of the mapping table class.
ALLOWANCE-28	The parameter is a range table ID but no range table class is defined.	Add the additional information of the range table class.
ALLOWANCE-29	The parameter is a mapping table key and could not be linked to a mapping table class.	Remove the additional information of the mapping table class.
ALLOWANCE-30	The parameter cannot declare additional information without a data type.	Add the additional information of a data type or remove any additional information.
ALLOWANCE-36	The Allowance Plan Item at index {0} is empty.	Replace it by a valid Allowance Plan Item or remove it.
ALLOWANCE-37	The ID of the Allowance Plan Item at index {0} is missing.	Add an ID to the Allowance Plan Item.
ALLOWANCE-38	The ID "{0}" of the Allowance Plan Item at index {1} is already used by the Allowance Plan Item at index {2}.	Change the ID of the Allowance Plan Item.
ALLOWANCE-39	No Allowance Logic is specified.	Add the Allowance Logic to the Allowance Plan Item.
ALLOWANCE-40	Error while validating the Allowance Plan Item "{0}" at index {1}.
ALLOWANCE-41	The ID of the master Allowance Logic referred to by the Allowance Plan Item is missing.	Add an ID to the master Allowance Logic in the Allowance Plan Item.
ALLOWANCE-42	The ID of the master Allowance Logic referred to by the Allowance Plan Item and the code "{0}" of the retrieved Allowance Logic do not match.	Contact the support.
ALLOWANCE-43	The owner of the Allowance Plan and the owner of the Allowance Logic. The owner of the Allowance Plan is "{0}". The owner of the Allowance Logic is "{1}".	Set the ID the master Allowance Logic that has the same owner as the Allowance Plan.
ALLOWANCE-44	The name of the Counter at index {0} is missing.	Add a name to the Counter.
ALLOWANCE-45	The name "{0}" of the Counter at index {1} is already used by the Counter at index {2}.	Change the name of the Counter.
ALLOWANCE-46	The name of the Counter Reference at index {0} is missing.	Add a name to the Counter Reference.
ALLOWANCE-47	The name "{0}" of the Counter Reference at index {1} is already used by the Counter at index {2}.	Change the name of the Counter Reference.
ALLOWANCE-48	The initial value of the Counter "{0}" at index {1} is missing.	Add an initial value to the Counter.
ALLOWANCE-49	The Counter "{0}" at index {1} does not exist in the Allowance Logic "{2}".	Remove this Counter.
ALLOWANCE-50	The target name of the Counter Reference "{0}" at index {1} is missing.	Add a target name to the Counter Reference.
ALLOWANCE-51	The Counter "{0}" targeted by the Counter Reference "{1}" at index {2} does not exist.	Change the target name of the Counter Reference into an existing one or create a new Counter in the Allowance Plan with this target name.
ALLOWANCE-52	The Counter Reference "{0}" at index {1} does not exist in the Allowance Logic "{2}".	Remove this Counter Reference.
ALLOWANCE-58	The name of the Parameter at index {0} is missing.	Add a name to the Parameter.
ALLOWANCE-59	The name "{0}" of the Parameter at index {1} is already used by the Parameter at index {2}.	Change the name of the Parameter.
ALLOWANCE-60	The name of the Parameter Reference at index {0} is missing.	Add a name to the Parameter Reference.
ALLOWANCE-61	The name "{0}" of the Parameter Reference at index {1} is already used by the Parameter at index {2}.	Change the name of the Parameter Reference.
ALLOWANCE-62	The Parameter "{0}" of the Allowance Logic points to an unknown mapping table "{1}".	Change the value to a known mapping table.
ALLOWANCE-63	The Parameter "{0}" of the Allowance Logic points to an unknown range table "{1}".	Change the value to a known range table.
ALLOWANCE-64	The type of the Parameter "{0}" at index {1} is missing or unknown (the supported types are string, number, date).	Add a type to the Parameter or change it into a supported one: string, number, date.
ALLOWANCE-65	The date value of the Parameter "{0}" at index {1} is missing.	Add a date value to the Parameter.
ALLOWANCE-66	The number value of the Parameter "{0}" at index {1} is missing.	Add a number value to the Parameter.
ALLOWANCE-67	The string value of the Parameter "{0}" at index {1} is missing.	Add a string value to the Parameter.
ALLOWANCE-68	The type "{0}" of the Parameter "{1}" at index {2} is unsupported (the supported types are string, number, date).	Use a supported type (string, number, date) for the Parameter.
ALLOWANCE-69	The Parameter "{0}" at index {1} does not exist in the Allowance Logic "{2}".	Remove this Parameter.
ALLOWANCE-70	Error while validating the Parameter "{0}" at index {1}.
ALLOWANCE-71	The target name of the Parameter Reference "{0}" at index {1} is missing.	Add a target name to the Parameter Reference.
ALLOWANCE-72	The Parameter "{0}" targeted by the Parameter Reference "{1}" at index {2} does not exist.	Change the target name of the Parameter Reference into an existing one or create a new Parameter in the Allowance Plan with this target name.
ALLOWANCE-73	The type of the Parameter Reference "{0}" at index {1} is missing or unknown (the supported types are string, number, date).	Add a type to the Parameter Reference or change it into a supported one: string, number, date.
ALLOWANCE-74	The type "{0}" of the Parameter Reference "{1}" at index {2} is not compatible with the type "{3}" of the targeted Parameter.	Link the Parameter Reference to a compatible Parameter.
ALLOWANCE-75	Error while validating the Parameter Reference "{0}" at index {1}.
ALLOWANCE-76	The Parameter Reference "{0}" at index {1} does not exist in the Allowance Logic "{2}".	Remove this Parameter Reference.
ALLOWANCE-77	The Parameter "{0}" of the Allowance Plan referenced by the Parameter Reference "{1}" at index {2} is not declared as a mapping table ID.	Declare the data type of the mapping table ID and the additional information of the mapping table class in the Parameter.
ALLOWANCE-78	The Parameter "{0}" of the Allowance Plan referenced by the Parameter Reference "{1}" at index {2} declares an incompatible mapping table class "{3}" while the Parameter Reference is of class "{4}".	Declare the data type of the mapping table ID and the additional information of the mapping table class in the Parameter.
ALLOWANCE-79	The Parameter "{0}" of the Allowance Plan referenced by the Parameter Reference "{1}" at index {2} is not declared as a range table ID.	Declare the data type of the range table ID and the additional information of the range table class in the Parameter.
ALLOWANCE-80	The Parameter "{0}" of the Allowance Plan referenced by the Parameter Reference "{1}" at index {2} declares an incompatible range table class "{3}" while the Parameter Reference is of class "{4}".	Declare the data type of the range table ID and the additional information of the range table class in the Parameter.
ALLOWANCE-81	The Parameter "{0}" of the Allowance Plan referenced by the Parameter Reference "{1}" at index {2} is not declared as a mapping table key.	Declare the additional information of the data type of the mapping table key in the Parameter.
ALLOWANCE-83	The Parameter is declared as a mapping table ID while it does not exist in the Allowance Logic.	Remove the additional information of the data type of the mapping table ID from the Parameter.
ALLOWANCE-84	The Parameter is declared as a mapping table ID but it does not have a STRING type.	Declare the parameter as a STRING.
ALLOWANCE-85	The mapping table class "{0}" declared in the Parameter is incompatible with the one declared in the Allowance Logic "{1}".	Declare the right mapping table class.
ALLOWANCE-86	The Parameter "{0}" at index {1} points to an unknown mapping table "{2}".	Change the value to a known mapping table.
ALLOWANCE-87	The Parameter is declared as a range table ID while it does not exist in the Allowance Logic.	Remove the additional information of the data type of the range table ID from the Parameter.
ALLOWANCE-88	The Parameter is declared as a range table ID but it does not have a STRING type.	Declare the parameter as a STRING.
ALLOWANCE-89	The range table class "{0}" declared in the Parameter is incompatible with the one declared in the Allowance Logic "{1}".	Declare the right range table class.
ALLOWANCE-90	The Parameter "{0}" at index {1} points to an unknown range table "{2}".	Change the value to a known range table.
ALLOWANCE-91	The Parameter is declared as a mapping table key while it does not exist in the Allowance Logic.	Remove the additional information of the data type of the mapping table key from the Parameter.
ALLOWANCE-92	The Parameter is declared with a mapping table key but has a wrong type "{0}" while it should be "{1}".	Declare the right type for the parameter.
ALLOWANCE-93	The mapping table ID "{0}" is not declared whereas it is used in the Allowance Logic.	Add the corresponding mapping table ID parameter.
ALLOWANCE-94	The range table ID "{0}" is not declared whereas it is used in the Allowance Logic.	Add the corresponding range table ID parameter.
ALLOWANCE-95	The mapping table key "{0}" of type "{1}" is not declared whereas it is used in the Allowance Logic.	Add the corresponding mapping table ID parameter.
ALLOWANCE-96	The Charged Item Mapping is missing in the Allowance Plan Item.	Set the Charged Item Mapping of the Allowance Plan Item.
ALLOWANCE-97	The class of the Charged Item Mapping is missing.	Add a class to the Charged Item Mapping.
ALLOWANCE-98	Error while validating the Charged Item Mapping of class "{0}".
ALLOWANCE-99	The name of the Charged Item Mapping Entry at index {0} is missing.	Add a name to the Charged Item Mapping Entry.
ALLOWANCE-100	The name "{0}" of the Charged Item Mapping Entry at index {1} is already used by the Charged Item Mapping Entry at index {2}.	Change the name of the Charged Item Mapping Entry.
ALLOWANCE-101	The type of the Charged Item Mapping Entry "{0}" at index {1} is missing or unknown (the supported types are string, number, date, boolean).	Add a type to the Charged Item Mapping Entry or change it into a supported one: string, number, date, boolean.
ALLOWANCE-102	The Charged Item Mapping contains the "{0}" entry. This entry does not exist in the "{1}" Charged Item Class.	Remove the entry from the Charged Item Mapping or replace it by an existing property of the Charged Item Class.
ALLOWANCE-103	The Charged Item Mapping contains the entry "{0}" with the type: {1}. This type is not compatible with the one defined in the Charged Item Class "{2}": {3}.	Change the type of the Charged Item Mapping entry.
ALLOWANCE-104	The Allowance Plan is missing in the CreateAllowancePlanOp operation.	Add the Allowance Plan to the CreateAllowancePlanOp operation.
ALLOWANCE-105	The Allowance Plan "{0}" already exists.	Use another ID or use the ModifyAllowancePlanOp operation to modify the Allowance Plan.
ALLOWANCE-106	The status of the new Allowance Plan "{0}" must be set to open.	Set the status of this new Allowance Plan to open.
ALLOWANCE-107	The ID of the Allowance Logic "{0}" does not match any Allowance Logic.	Set the ID of an existing Allowance Logic object.
ALLOWANCE-108	The code of the charged item class "{0}" does not match any charged item class.	Set the code of an existing charged item class.
ALLOWANCE-109	The Allowance Plan is missing in the ModifyAllowancePlanOp operation.	Add the Allowance Plan to the ModifyAllowancePlanOp operation.
ALLOWANCE-110	The Allowance Plan with the ID {0} does not exist.	Change the ID of the Allowance Plan into an existing one or first create the Allowance Plan.
ALLOWANCE-111	Impossible to modify the Allowance Plan because the specified owner {0} does not correspond to the owner {1} existing in the Allowance Plan.	Change the owner into the owner of the Allowance Plan or create a new Allowance Plan for the specified owner.
ALLOWANCE-112	The description of the Allowance Plan "{0}" cannot be modified because the Allowance Plan has been released.	Create a new Allowance Plan.
ALLOWANCE-120	The parameter "{1}" cannot be removed because the Allowance Plan "{0}" has been released.	Create a new Allowance Plan.
ALLOWANCE-121	The parameter "{1}" cannot be added because the Allowance Plan "{0}" has been released.	Create a new Allowance Plan.
ALLOWANCE-122	The description of the parameter "{1}" cannot be modified because the Allowance Plan "{0}" has been released.	Create a new Allowance Plan.
ALLOWANCE-123	The type of the parameter "{1}" cannot be modified because the Allowance Plan "{0}" has been released.	Create a new Allowance Plan.
ALLOWANCE-127	The counter "{1}" cannot be removed because the Allowance Plan "{0}" has been released.	Create a new Allowance Plan.
ALLOWANCE-128	The counter "{1}" cannot be added because the Allowance Plan "{0}" has been released.	Create a new Allowance Plan.
ALLOWANCE-129	The description of the counter "{1}" cannot be modified because the Allowance Plan "{0}" has been released.	Create a new Allowance Plan.
ALLOWANCE-133	The allowance plan item "{1}" cannot be removed because the Allowance Plan "{0}" has been released.	Create a new Allowance Plan.
ALLOWANCE-134	The allowance plan item "{1}" cannot be added because the Allowance Plan "{0}" has been released.	Create a new Allowance Plan.
ALLOWANCE-135	The allowance plan item "{1}" cannot be modified because the Allowance Plan "{0}" has been released.	Create a new Allowance Plan.
ALLOWANCE-138	The Allowance Plan "{0}" whose status is already set to released cannot be set to open.	Set the status of this new Allowance Plan to released.
ALLOWANCE-141	The Allowance Logic "{0}" is unknown.	Change the allowanceLogicId into an existing Allowance Logic identifier.
ALLOWANCE-142	The code of the charged item class "{0}" does not match any charged item class.	Set the code of an existing charged item class.
ALLOWANCE-143	Internal server error. The Allowance Plan Item refers to no known Allowance Logic.	Contact the support.
ALLOWANCE-144	The Allowance Plan Item already refers to the Allowance Logic "{0}" and cannot refer to the Allowance Logic "{1}" at the same time.	Use the Allowance Logic already referred to by the Allowance Plan Item or create a new Allowance Plan Item.
ALLOWANCE-145	Internal server error. The Allowance Plan Item refers to an unknown charged item class.	Contact the support.
ALLOWANCE-146	The code of the charged item class "{0}" does not match any charged item class.	Add the code of an existing charged item class.
ALLOWANCE-147	The ID of the Allowance Plan is missing in the DeleteAllowancePlanOp operation.	Set the ID of the Allowance Plan to the DeleteAllowancePlanOp operation.
ALLOWANCE-148	The Allowance Plan "{0}" cannot be deleted because it does not exist.	Use an existing ID for the Allowance Plan.
ALLOWANCE-149	Error while deleting the Allowance Plan "{0}". The Allowance Plan is still linked to one or more Charging Contract Items.	First delete all Charging Contract Items referring to the Allowance Plan.
ALLOWANCE-150	The mandatory filter in the SearchAllowancePlanOp operation is missing.	Add the filter to the SearchAllowancePlanOp operation.
ALLOWANCE-151	An error occurred during the execution of the SearchAllowancePlanOp operation: {0}
ALLOWANCE-152	The code of the charged item class is empty or null.	Set the code of an existing charged item class.
ALLOWANCE-153	The owner of the Allowance Plan and the owner of the Charged Item Class do not match. The owner of the Allowance Plan is "{0}". The owner of the Charged Item Class is "{1}".	Set the code of a Charged Item Class that has the same owner as the Allowance Plan.
ALLOWANCE-200	The Allowance Logic has no ID.	Set the ID of the Allowance Logic.
ALLOWANCE-201	The Allowance Logic "{0}" has no owner.	Set the owner of the Allowance Logic.
ALLOWANCE-202	The Allowance Logic "{0}" has no allowance logic tree.	Add the allowance logic tree to the Allowance Logic.
ALLOWANCE-209	The name of the recurring trigger is not set.	Set the name of the recurring trigger.
ALLOWANCE-210	The recurring trigger "{0}" does not contain any allowance component.	Add an allowance component to the recurring trigger.
ALLOWANCE-211	The recurring trigger "{0}" is invalid because the component tree is invalid.	Check the validity of the rate components in the recurring trigger.
ALLOWANCE-212	The name of the one-shot trigger is not set.	Set the name of the one-shot trigger.
ALLOWANCE-213	The one-shot trigger "{0}" does not contain any allowance component.	Add an allowance component to the one-shot trigger.
ALLOWANCE-214	The one-shot trigger "{0}" is invalid because the component tree is invalid.	Check the validity of the components in oneshot allowance.
ALLOWANCE-216	The counter has no name.	Set the counter name.
ALLOWANCE-217	The counter "{0}" has no initial value.	Set the initial value of the counter.
ALLOWANCE-218	The counter "{0}" is duplicated.	Set the counter to a unique name.
ALLOWANCE-219	The parameter "{0}" is duplicated.	Set the parameter to a unique name.
ALLOWANCE-220	The Allowance Logic is missing in the CreateAllowanceLogicOp operation.	Add the Allowance Logic to the CreateAllowanceLogicOp operation.
ALLOWANCE-221	The Allowance Logic "{0}" already exists.	Use another ID or use the ModifyAllowanceLogicOp operation to modify the Allowance Logic.
ALLOWANCE-222	The Allowance Logic is missing in the ModifyAllowanceLogicOp operation.	Add the Allowance Logic to the ModifyAllowanceLogicOp operation.
ALLOWANCE-223	The Allowance Logic "{0}" cannot be modified because it does not exist.	Check the ID of the Allowance Logic.
ALLOWANCE-224	The Allowance Logic owner "{0}" is not modifiable in the Allowance Logic "{1}".	Check the owner of the Allowance Logic.
ALLOWANCE-225	The ID of the Allowance Logic is missing in the DeleteAllowanceLogicOp operation.	Add the ID of the Allowance Logic to the DeleteAllowanceLogicOp operation.
ALLOWANCE-226	The Allowance Logic "{0}" cannot be deleted because it is referred to by the following Allowance Plans: {1}.	First delete the Allowance Plan(s).
ALLOWANCE-227	The Allowance Logic "{0}" cannot be deleted because it does not exist.	Check the code of the Allowance Logic.
ALLOWANCE-229	The one-shot trigger "{0}" event is not set.	Set a valid event in the one-shot trigger.
ALLOWANCE-230	The event "{1}" of the one-shot trigger "{0}" is not a valid event.	Set a valid event in the one-shot trigger.
ALLOWANCE-232	The Allowance Plan "{0}" cannot be deleted because it is referred to by the following Refill Logic objects: {1}.	First delete the Refill Logic object(s).
ALLOWANCE-233	The Allowance Plan "{0}" cannot be deleted because it is referred to by the following Charge Components: {1}.	First delete the Charge Component(s).
ALLOWANCE-234	The parameter has no name.	Set the parameter name.
ALLOWANCE-235	The parameter "{0}" has no value.	Set the parameter value.
ALLOWANCE-236	The mapping table class "{0}" defined in the parameter "{1}" does not exist in the SAP CC system.	Specify the identifier of an existing mapping table class for the additional information value.
ALLOWANCE-237	The mapping table "{0}" defined in the parameter "{1}" does not exist in the SAP CC system.	Specify the identifier of an existing mapping table for the additional information value.
ALLOWANCE-238	The range table class "{0}" defined in the parameter "{1}" does not exist in the SAP CC system.	Specify the identifier of an existing range table class for the additional information value.
ALLOWANCE-239	The range table "{0}" defined in the parameter "{1}" does not exist in the SAP CC system.	Specify the identifier of an existing range table for the additional information value.
ALLOWANCE-240	The additional information named "{0}" defined in the parameter "{1}" is not supported.	Check the validity of the parameter. The supported values are: dataType, mappingTableClass and rangeTableClass.
ALLOWANCE-241	The additional information value "{0}" defined in the parameter "{1}" is not a valid data type.	Check the validity of the parameter additional information.
ALLOWANCE-242	The additional information value "{0}" requires that the parameter "{1}" is of type string.	The type is wrong. Check the type and change it into string.
ALLOWANCE-243	The parameter "{0}" does not define a mapping table class.	Specify the identifier of an existing mapping table class for the additional information value.
ALLOWANCE-244	The parameter "{0}" does not define a range table class.	Specify the identifier of an existing range table class for the additional information value.
ALLOWANCE-245	The recurring trigger "{0}" frequency is not set.	Set a valid frequency in the recurring trigger.
ALLOWANCE-246	The chargeable item class ID of the usage allowance "{0}" is not set.	Set a valid chargeable item class ID in the usage allowance.
ALLOWANCE-248	No allowance plan is specified.	Specify an allowance plan in the create allowance component.
ALLOWANCE-249	The allowance plan "{0}" does not exist.	Specify the identifier of an existing allowance plan.
ALLOWANCE-250	The allowance plan "{0}" is not released.	Specify the identifier of a released allowance plan.
ALLOWANCE-251	The parameter "{0}" does not exist in the allowance plan "{1}".	Specify a parameter name that exists in the allowance plan.
ALLOWANCE-252	The parameter "{0}" does not have the same type as in the allowance plan "{1}".	Specify the same parameter type as in the allowance plan.
ALLOWANCE-253	The parameter "{0}" of the allowance plan "{1}" is not defined in the create allowance component.	Specify a value for the parameter.
ALLOWANCE-254	The mapping table "{0}" referenced by the parameter "{1}" does not exist.	Specify the identifier of an existing mapping table.
ALLOWANCE-255	The mapping table "{0}" referenced by the parameter "{1}" is not related to the mapping table class "{2}".	Specify the identifier of an mapping table related to the mapping table class.
ALLOWANCE-256	The range table "{0}" referenced by the parameter "{1}" does not exist.	Specify the identifier of an existing range table.
ALLOWANCE-257	The range table "{0}" referenced by the parameter "{1}" is not related to the range table class "{2}".	Specify the identifier of a range table related to the range table class.
ALLOWANCE-258	The counter "{0}" does not exist in the allowance plan "{1}".	Specify a counter name that exists in the allowance plan.
ALLOWANCE-259	The counter "{0}" of the allowance plan "{1}" is not defined in the create allowance component.	Specify a value for the counter.
ALLOWANCE-260	The context property name "{0}" specified in the start date is not valid.	Specify a valid context property name in the start date.
ALLOWANCE-261	The context property name "{0}" specified in the end date is not valid.	Specify a valid context property name in the end date.
ALLOWANCE-262	The context property name "{0}" specified in the parameter "{1}" is not valid.	Specify a valid context property name for the parameter.
ALLOWANCE-263	The context property name "{0}" specified in the counter "{1}" is not valid.	Specify a valid context property name for the counter.
ALLOWANCE-264	The code of the charged item class is empty or null.	Set the code of an existing charged item class.
ALLOWANCE-265	The code of the charged item class is empty or null.	Set the code of an existing charged item class.
ALLOWANCE-266	The code of the charged item aggregation policy "{0}" does not match any charged item aggregation policy.	Set the code of an existing charged item aggregation policy.
ALLOWANCE-267	The code of the charged item aggregation policy "{0}" does not match any charged item aggregation policy.	Set the code of an existing charged item aggregation policy.
ALLOWANCE-268	The code of the charged item aggregation policy "{0}" does not match any charged item aggregation policy.	Set the code of an existing charged item aggregation policy.
ALLOWANCE-269	The Allowance Plan "{0}" does not contain any Allowance Plan Item.	Add an Allowance Plan Item to the Allowance Plan.
ALLOWANCE-270	The logic tree of the Allowance Logic "{0}" does not contain any allowance component.	Add an allowance component to the logic tree of the Allowance Logic.
ALLOWANCE-271	The type "{0}" of the Parameter "{1}" at index {2} is not compatible with the type "{3}" of the corresponding Allowance Logic Parameter.	Set the correct type for the Parameter.
ALLOWANCE-272	The type "{0}" of the Parameter Reference "{1}" at index {2} is not compatible with the type "{3}" of the corresponding Allowance Logic Parameter.	Set the correct type for the Parameter Reference.
ALLOWANCE-273	The value of the Charged Item Mapping Entry "{0}" at index {1} is not set.	Set either a value or a property name in the Charged Item Mapping Entry.
ALLOWANCE-274	The allowance plan "{0}" does not belong to the same owner as the charge component or refill logic.	Specify an allowance plan with the same owner as the charge component or refill logic.
ALLOWANCE-276	The Allowance Interface is missing in the modify operation.	Add an Allowance Interface to the modify operation.
ALLOWANCE-277	Error while validating the Allowance Interface.
ALLOWANCE-278	The name of the Parameter at index {0} is missing.	Set a name for the Parameter.
ALLOWANCE-279	The name "{0}" of the Parameter at index {1} is already used by the Parameter at index {2}.	Change the name of the Parameter.
ALLOWANCE-280	The description of the Parameter "{0}" at index {1} is missing.	Set a description for the Parameter.
ALLOWANCE-281	The type of the Parameter "{0}" at index {1} is missing or unknown (the supported types are string, number, date).	Set a type for the Parameter or change it into a supported one: string, number, date.
ALLOWANCE-282	The default value of the Parameter "{0}" at index {1} is missing.	Set a default value for the Parameter.
ALLOWANCE-283	The type of the Parameter "{0}" at index {1} cannot be changed from {2} to {3}.	Set the same type for the Parameter.
ALLOWANCE-284	The Parameter "{0}" cannot be removed.	Set the Parameter.
ALLOWANCE-285	The name of the Counter at index {0} is missing.	Set a name for the Counter.
ALLOWANCE-286	The name "{0}" of the Counter at index {1} is already used by the Counter at index {2}.	Change the name of the Counter.
ALLOWANCE-287	The description of the Counter "{0}" at index {1} is missing.	Set a description for the Counter.
ALLOWANCE-288	The default value of the Counter "{0}" at index {1} is missing.	Set a default value for the Counter.
ALLOWANCE-289	The Counter "{0}" cannot be removed.
ALLOWANCE-290	The context property name "{0}" specified in the parameter "{1}" does not correspond to a parameter of type mapping table identifier.	Specify a context property name that corresponds to a parameter of type mapping table identifier.
ALLOWANCE-291	The context property name "{0}" specified in the parameter "{1}" does not correspond to a parameter of type range table identifier.	Specify a context property name that corresponds to a parameter of type range table identifier.
ALLOWANCE-300	The Allowance Event Class is missing in the CreateAllowanceEventClassOp operation.	Add the Allowance Event Class to the CreateAllowanceEventClassOp operation.
ALLOWANCE-301	The Allowance Event Class has no ID.	Set the ID of the Allowance Event Class.
ALLOWANCE-302	The owner of the Allowance Event Class "{0}" is missing in the CreateAllowanceEventClassOp operation.	Add the owner of the Allowance Event Class to the CreateAllowanceEventClassOp operation.
ALLOWANCE-303	The Allowance Event Class "{0}" already exists.	Use another ID or use the ModifyAllowanceEventClassOp operation to modify the Allowance Event Class.
ALLOWANCE-304	The name is missing in one of the Allowance Event Class properties.	Add a name to the Allowance Event Class property.
ALLOWANCE-305	The property "{0}" of type "{1}" cannot be removed or changed from the Allowance Event Class "{2}" because it is referenced by the following Allowance Logic object(s): {3}.	Keep the property as it was created initially in the Allowance Event Class.
ALLOWANCE-306	The name "{0}" of the Allowance Event Class property is already used.	Change the name of the Allowance Event Class property.
ALLOWANCE-307	The Allowance Event Class is missing in the ModifyAllowanceEventClassOp operation.	Add the Allowance Event Class to the ModifyAllowanceEventClassOp operation.
ALLOWANCE-308	The Allowance Event Class has no ID.	Set the ID of the Allowance Event Class.
ALLOWANCE-309	The owner of the Allowance Event Class "{0}" cannot be modified	Set the owner of the Allowance Event Class
ALLOWANCE-310	The Allowance Event Class "{0}" cannot be deleted because it does not exist.	Check the ID of the Allowance Event Class.
ALLOWANCE-311	The parameter "{0}" specified as a sorting criterion does not exist in the Allowance Interface.	Set the name of a parameter that exists in the Allowance Interface in the sorting criterion.
ALLOWANCE-312	The parameter "{0}" is specified more than once as a sorting criterion.	Set the parameter as a sorting criterion only once.
ALLOWANCE-313	The parameter "{0}" is specified as a sorting criterion of type "{1}" while its type is "{2}" in the Allowance Interface.	Set the correct type for the parameter in the sorting criterion.
ALLOWANCE-314	The parameter "{0}" cannot be used as a sorting criterion because it is of type "string".	Use the name of another parameter as a sorting criterion.
ALLOWANCE-315	The counter "{0}" specified as a sorting criterion does not exist in the Allowance Interface.	Set the name of a counter that exists in the Allowance Interface in the sorting criterion.
ALLOWANCE-316	The counter "{0}" is specified more than once as a sorting criterion.	Set the counter as a sorting criterion only once.
ALLOWANCE-317	The counter "{0}" is specified as a sorting criterion of type "{1}" while its type must be "number".	Set the counter to the type "number" in the sorting criterion.
ALLOWANCE-318	The sorting criterion "{0}" is unknown.	Set a valid sorting criterion.
ALLOWANCE-319	The name of the event-based trigger is not set.	Set the name of the event-based trigger.
ALLOWANCE-320	The allowance event class ID of the event-based trigger "{0}" is not set.	Set a valid allowance event class ID in the usage allowance.
ALLOWANCE-321	The Allowance Event Class "{0}" referred to in the event-based trigger "{1}" is already used.	Use an existing but not already used Allowance Event Class in the event-based trigger.
ALLOWANCE-322	The Allowance Event Class "{0}" referred to in the event-based trigger "{1}" does not exist.	Use an existing Allowance Event Class in the event-based trigger.
ALLOWANCE-323	The owner of the allowance logic and the owner of the Allowance Event Class referenced by the event-based trigger "{0}" do not match. The owner of the allowance logic is "{1}". The owner of the Allowance Event Class is "{2}".	Set a chargeable item class that has the same owner as the allowance logic in the usage allowance.
ALLOWANCE-324	The event-based trigger "{0}" cannot be added because the Allowance Logic is referenced more than once in the Allowance Plan "{1}".	Do not add an event-based trigger to the Allowance Logic or remove the duplicate Allowance Logic from the Allowance Plan.
ALLOWANCE-325	The Allowance Event Class "{0}" referenced by the event-based trigger "{1}" is already used in the Allowance Plan "{2}" by the Allowance Logic "{3}".	Select another Allowance Event Class in the event-based trigger.
ALLOWANCE-326	The event-based trigger "{0}" does not contain any allowance component.	Add an allowance component to the event-based trigger.
ALLOWANCE-327	The event-based trigger "{0}" is invalid because the component tree is invalid.	Check the validity of the components in the event-based trigger.
ALLOWANCE-328	Rating failure of the charge activation "{0}" in the allowance "{1}".	Fix the logic tree of the allowance logic.
ALLOWANCE-329	Rating event failure of the charge activation "{0}" in the allowance "{1}".	Fix the logic tree of the allowance logic.
ALLOWANCE-330	The Allowance Event Class "{0}" referred to in the allowance logic "{1}" is already used by another allowance logic.	Set the allowance logic with the Allowance Event Class not already used in another allowance logic.
ALLOWANCE-336	The Allowance Event Class "{0}" cannot be deleted because it is referenced at least by one Allowance Event Sender operator or Event-Based Trigger Rate in the following: - Charge(s): {1}. - Refill Logic object(s): {2}. - Allowance Logic object(s): {3}.	First delete the Allowance Logic.
ALLOWANCE-337	No Allowance Event Class is specified.	Specify an Allowance Event Class.
ALLOWANCE-338	The Allowance Event Class "{0}" does not exist.	Specify the identifier of an existing Allowance Event Class.
ALLOWANCE-339	The owner of the Allowance Logic and the owner of the Allowance Event Class referenced by the component do not match. The owner of the Allowance Logic is "{0}". The owner of the Allowance Event Class is "{1}".	Set an Allowance Event Class that has the same owner as the Allowance Logic.
ALLOWANCE-340	The property at index {0} does not have a name.	Specify a property name.
ALLOWANCE-341	The property "{0}" is specified more than once.	Specify the property only once.
ALLOWANCE-342	The property "{0}" does not exist in the Allowance Event Class "{1}".	Specify a property name which exists in the Allowance Event Class.
ALLOWANCE-343	The property "{0}" does not have the same type as in the Allowance Event Class "{1}".	Specify the same property type as in the Allowance Event Class.
ALLOWANCE-344	The property "{0}" does not have a value.	Specify a value for the property.
ALLOWANCE-345	The property "{0}" does not have a context property value.	Specify a context property value for the property.
ALLOWANCE-346	The context property name "{1}" specified in the property "{0}" is not valid.	Specify a valid context property name for the property.
ALLOWANCE-347	No properties can be added to the Allowance Event Class "{0}" because it is referenced at least by one Allowance Event operator in the following: - Charge(s): {1}. - Refill Logic object(s): {2}. - Allowance Logic object(s): {3}.	Specify a value for the property.
ALLOWANCE-348	The type "{0}" of the parameter "{1}" at index {2} is not equal to the type "{3}" of the parameter in the Allowance Interface.	Link the Parameter or remove it.
ALLOWANCE-350	The code of the Charged Item Class of the Allowance Plan Item "{1}" cannot be changed from "{2}" to "{3}" because the Allowance Plan "{0}" has been released.	Set the code of the original Charged Item Class.
ALLOWANCE-352	The parameter additional information "{0}" at index {1} does not have a value.	Set of a value for this additional information.
ALLOWANCE-353	The clause property "{0}" is unknown.	Set a valid clause property: A parameter or a counter defined in the Allowance Interface or a default Allowance property (unique identifier, activation date or expiration date)
ALLOWANCE-354	The parameter "{0}" specified as a clause property does not exist in the Allowance Interface.	Set the name of a parameter that exists in the Allowance Interface.
ALLOWANCE-356	The parameter "{0}" is specified as a clause property of type "{1}" while its type is "{2}" in the Allowance Interface.	Set the parameter to the correct type in the clause property.
ALLOWANCE-357	The counter "{0}" specified as a clause property does not exist in the Allowance Interface.	Set the name of a counter that exists in the Allowance Interface.
ALLOWANCE-359	The counter "{0}" is specified as a clause property of type "{1}" while its type must be "number".	Set the counter to the type "number" in the clause property.
ALLOWANCE-360	The clause property "{0}" is defined with the operator "{1}" which is not compatible with the type "{2}".	Set a clause operator compatible with the type of the clause property.
ALLOWANCE-361	The clause property "{0}" is defined with the value "{1}" which is not compatible with the type "{2}".	Set a clause value compatible with the type of the clause property.
ALLOWANCE-363	The parameter "{0}" specified as the origin of the generated property "{1}" does not exist in the Allowance Interface.	Set the name of a parameter that exists in the Allowance Interface as the origin of the generated property.
ALLOWANCE-364	The generated property "{0}" defines its origin with the parameter "{1}" of type "{2}" while its type is "{3}" in the Allowance Interface.	Set the parameter to the correct type in the generated property.
ALLOWANCE-365	The counter "{0}" specified as the origin of the generated property "{1}" does not exist in the Allowance Interface.	Set the name of a counter that exists in the Allowance Interface as origin of the generated property.
ALLOWANCE-366	The generated property "{0}" defines its origin with the counter "{1}" of type "{2}" while its type must be "number".	Set the counter to the type "number" in the generated property.
ALLOWANCE-367	The generated property "{0}" defines its origin with the unknown property "{1}".	Set a valid origin in a generated property: a parameter or a counter defined in the Allowance Interface or a default Allowance property (unique identifier, activation date or expiration date)
ALLOWANCE-368	The parameter "{0}" specified as the origin of the generated property "{1}" is of type "string" which is not allowed	Set an origin of type "date" or "number" in a generated property
ALLOWANCE-369	The generated property "{0}" defines its origin with the default property "{1}" and the type "{2}" instead of "{3}".	Set the right type of the origin in a generated property: "number" for the unique identifier, "date" for the allowance activation and allowance expiration.
ALLOWANCE-370	The clause property "{0}" is defined with the type "{1}" instead of "{2}".	Set the right type in the clause property: "number" for the unique identifier, "date" for the allowance activation and allowance expiration.
ALLOWANCE-371	The clause property "{0}" of type "{1}" is defined with the referenced value "{2}" which is not part of the rating context.	Set a clause value with a valid rating context property name.
ALLOWANCE-372	The name of the generated allowance count property is not set.	Set a name for the generated allowance count property.
ALLOWANCE-373	The Counter "{0}" cannot be added because it is already used by one or more Allowance Plans.	Set a name not already used by an Allowance Plan
ALLOWANCE-374	The Parameter "{0}" cannot be added because it is already used by one or more Allowance Plans.	Set a name not already used by an Allowance Plan
ALLOWANCE-375	One or more clause properties are invalid. A clause must have a name, a type, an operator, an isReferenceValue flag and a value.	Check the clause properties have a name, a type, an operator, an isReferenceValue flag and a value
ALLOWANCE-376	One or more generated properties are invalid. A generated property must have a name, a type, an operator and an origin.	Check the generated properties have a name, a type, an operator, and an origin
ALLOWANCE-377	The generated property "{0}" is specified more than once.	Specify the generated property only once.
ALLOWANCE-378	The default allowance property "{0}" is specified more than once as a sorting criterion.	Set the counter as a sorting criterion only once.
ALLOWANCE-379	The allowance search filter is missing in the search operation.	Add an allowance search filter to the search operation.
ALLOWANCE-380	The attribute description "id" is missing in the allowance search filter.	Add the attribute description "id" to the allowance search filter.
ALLOWANCE-381	The attribute description "id" of the allowance search filter is invalid.	Set the attribute description "id" with either a format constraint or an enumerated constraint with a single value of type string.
ALLOWANCE-382	The identifier of the charging contract is empty.	Set a charging contract identifier that is not empty.
ALLOWANCE-384	The end date cannot be extended if the Allowance is not active.	Keep the previous end date.
ALLOWANCE-385	The start date cannot be modified after the creation of the Allowance.	Keep the previous start date.
ALLOWANCE-386	The end date cannot be modified after the creation of the Allowance.	Keep the previous end date but extends the end date with the extendedToEndDateProperty attribute.
ALLOWANCE-387	The start date property "{0}" is unknown in the rating context.	Set a valid rating context property name to define the start date.
ALLOWANCE-388	The end date property "{0}" is unknown in the rating context.	Set a valid rating context property name to define the end date.
ALLOWANCE-389	The extended to end date property "{0}" is unknown in the rating context.	Set a valid rating context property name to define the extended to end date.
ALLOWANCE-390	The start date property is empty or null.	Set a rating context property name to define the start date.
ALLOWANCE-391	The end date property is empty or null.	Set a rating context property name to define the end date.
ALLOWANCE-392	The generated property "{0}" is defined with the operator "{1}" which is not compatible with the type "{2}".
ALLOWANCE-393	The Charged Item Mapping contains the entry "{0}". This entry is already defined in the Charged Item Class "{1}".	Remove the entry from the Charged Item Mapping.
ALLOWANCE-394	The property "{1}" specified in the Charged Item Mapping Entry "{0}" is not allowed in an Allowance Plan.	Set the name of a property allowed in Allowance Plans.
ALLOWANCE-395	The Charged Item Mapping does not contain the entry "{0}". This entry has no value or the value is not applicable in this context in the Charged Item Class "{1}".	Add the missing entry in the Charged Item Mapping.
ALLOWANCE-396	The output property at index {0} does not have a name.	Specify a property name.
ALLOWANCE-397	The output property "{0}" is specified more than once.	Specify the output property only once.
ALLOWANCE-398	An output property cannot be defined for the unknown property "{0}" of the Allowance Event Class "{1}".	Specify a property name that exists in the Allowance Event Class.
ALLOWANCE-399	The monitored property "{0}" does not exist in the Allowance Event Class "{1}".	Specify a monitored property name that exists in the Allowance Event Class.
ALLOWANCE-400	The value of the output property "{0}" is missing.	Specify a property name.
ALLOWANCE-401	The allowance event property at index {0} does not have a name.	Specify a property name.
ALLOWANCE-402	The allowance event property "{0}" is specified more than once.	Specify the allowance event property only once.
ALLOWANCE-403	The property "{0}" does not exist in the Allowance Event Class "{1}".	Specify a property name that exists in the Allowance Event Class.
ALLOWANCE-404	The property "{0}" does not have the same type as in the Allowance Event Class "{1}".	Specify the same property type as in the Allowance Event Class.
ALLOWANCE-405	The property "{0}" does not have a value.	Specify a value for the property.
ALLOWANCE-406	The property "{0}" does not have a context property value.	Specify a context property value for the property.
ALLOWANCE-407	The context property name "{1}" specified in the property "{0}" is not valid.	Specify a valid context property name for the property.
ALLOWANCE-408	The output property name "{0}" is specified more than once.	Specify the output property name only once.
ALLOWANCE-409	The unit of time of the date shift is missing".	Add a unit of time to the date shift if missing or set a valid unit of time otherwise.
ALLOWANCE-410	The shift of a one-shot rate triggered on the allowance creation is not supported.	Remove the date shift of the one-shot rate.
ALLOWANCE-411	The brought forward triggering of one-shot rates related to the allowance activation is not supported (date shift is {0}).	Remove the date shift of the one-shot rate or set a positive quantity to delay the one-shot triggering.
ALLOWANCE-412	The delayed triggering of one-shot rates related to the allowance expiration is not supported (date shift is {0}).	Remove the date shift of the one-shot rate or set a negative quantity to brought forward the one-shot triggering.
ALLOWANCE-413	The property "{1}" specified in the Charged Item Mapping Entry "{0}" is invalid.	Set the name of a valid property.
ALLOWANCE-414	The type "{3}" of the property "{2}" specified in the Charged Item Mapping Entry "{0}" is invalid. The expected type is: "{1}".	Change the type of the Charged Item Mapping Entry or set another property with the expected type.
ALLOWANCE-415	The reporting scope "session" cannot be used in an allowance plan item.	Remove the reporting scope "session" from the allowance plan item.
ALLOWANCE-416	Unexpected error during the initialization of the Allowance Logic "{0}".	Contact the support.
ALLOWANCE-417	The Allowance Event Class "{0}" cannot be modified because it does not exist.	Check the ID of the Allowance Event Class.
ALLOWANCE-418	The ID of the Allowance Event Class is missing in the DeleteAllowanceEventClassOp operation.	Specify the ID of the Allowance Event Class in the DeleteAllowanceEventClassOp operation.
ALLOWANCE-419	The Allowance Logic specified in the operation has no ID.	Specify the ID of the Allowance Logic.
ALLOWANCE-420	The data type additional information is missing in the parameter {0}.	Specify the data type additional information for the parameter.
ALLOWANCE-421	Invalid structure of the clause properties.	Check the number and the order of the clause properties.
ALLOWANCE-432	The creation of allowances performed by an allowance logic is not allowed in the one-shot rate [{0}] because it is not configured with the expiration event.	Check that the one-shot rate used in your allowance logic for renewing allowances is configured with the expiration event.
ALLOWANCE-433	The creation of allowances performed by the allowance logic is not allowed in the one-shot rate [{0}] because a shifted delay is used.	Check that the one-shot rate used in your allowance logic for renewing allowances is configured with a zero-shifted delay.
ALLOWANCE-434	You cannot set a validity start date property in this allowance rate context.	Remove this property.
ALLOWANCE-435	The Allowance Plan [{0}] cannot be deleted because it is referred by the following Allowance Logic objects: [{1}].	First delete the Allowance Logic objects.

Legend

The SAP CC system fills in the error message dynamically with relevant information. {0} marks such an information entry.