Dismantling Equipment with Simultaneous Material
Movement
Use
You want to remove a piece of equipment from a superordinate piece of equipment or functional location and put it into storage.
This function is only possible for equipment with a material number and serial number.
Procedure
...
1. Choose Logistics → Plant Maintenance → Maintenance of Technical Objects → Configuration Control → Installation and Dismantling of Components from the SAP Easy Access screen.
2. In the mode list field, select Dismantle Equipment with Material Movement if the appropriate screen is not automatically displayed.
3.
Enter either a
piece of equipment or a material and a serial number in the Dismantle
Object group box, and choose 
Enter.
The system automatically outputs the current installation location of the corresponding piece of equipment.
4. Enter either a reservation or a movement type.
Enter a reference order, if required.
5. Select an event type and a part status on the Notification tab page.
6.
If you want to
simulate the removal before saving, choose 
Check. You can display the search
result in a full screen application log. Choose 
Application Log to do this.
7. Save your entries.
You may have
to activate the forced dismantling to override an error message issued by the
system. In this case, choose 
Forced Installation/Dismantling and
confirm the message in the following dialog box.
A forced dismantling is only possible after the simulation of the dismantling has taken place.
Result
● The equipment is removed from the object and the corresponding material is placed into storage. If the corresponding Business Add-In is active, a notification is generated or updated.
● After the equipment is dismantled, a structure gap is automatically generated.
● If forced dismantling was used to dismantle the equipment, a corresponding indicator is set on the Configuration Control tab page in the equipment master record.
See also: