As-Built Configuration Tabular

You use this activity to view and update actual components in the assembly of a product in the POD (CT514) or outside of the POD (CT515).

You can remove one or more components from an assembly, or replace components in the assembly by adding and removing them (see Removing, Replacing, and Adding Components and Assembly Point (Assemble Components)).

This activity validates the location, reservation, and time-sensitive key attributes before the component material can be consumed by an SFC number (see Material and SFC Number). It supports the consumption of serialized or non-serialized components.

Note Note

You can configure CT515 to behave independently of CT514 by using different activity rule settings.

End of the note.

Rules

The following table describes rules and settings that you can change for this activity in Activity Maintenance:

Rule	Setting
ALLOW_DONE_SFC	If set to TRUE, allows the user to modify SFC numbers that have the Done status
ALLOW_NEW_SFC	If set to TRUE, allows the user to modify SFC numbers that have the New status
ALLOW_REMOVE_ALL	If set to TRUE (default), displays the Remove All Assembled Components action on the Actions screen and allows removal of all components, or an assembled component retrieved with Filter by Component
ALLOW_RETURN_COMPONENT	If set to TRUE (default), displays a button allowing the user to return a component to floor stock when removing it
ALLOW_SCRAP_COMPONENT	If set to TRUE (default), displays a button allowing the user to scrap a component when removing it
DISPLAY_BARCODE	If set to YES, displays the Barcode field on the Add or Remove screen (see Two-Dimensional (2D) Barcode Scanning)
USE_COMPONENT_FILTER	The system displays the Filter by Component field to filter BOM components. See also COMPONENT_FILTER_REQUIRED and Filter by Component below in this topic.
COMPONENT_FILTER_REQUIRED	If set to TRUE, the user must enter a value in the Filter by Component field before choosing Retrieve. The default value: FALSE

Fields

The following tables describe fields requiring explanation:

Initial screen
Field	Description
Component State	Displays only components with the specified state in the table Assembled & Unassembled: Displays both components that have been assembled onto an SFC number and components listed in the BOM that have not been assembled onto the SFC number. Does not include Auto Assembled, Excess or Non-BOM components. All: Displays components with any state Assembled: Displays only components that have been assembled onto an SFC number. Does not include Auto Assembled components. Auto Assembled: Displays only assembled components that have an assembly operation and an assembly data type of NONE Removed: Displays only components that have been removed from an SFC number. Includes removed Auto Assembled components. Unassembled: Displays only components listed in the BOM that have not been assembled onto an SFC number. Does not include Auto Assembled components.
SFC	The SFC number of the assembly
Filter by Component	Text to filter BOM components Example When you enter `ABC1` in the Filter by Component field and choose Browse, the system displays all materials whose names begin with ABC1 The component you select displays in the tree or the table. End of the example.
Material/Version	The material name and version of the SFC number
Routing/Version	The routing and version of the routing on which the SFC number is being processed
BOM/Version	The BOM and version the SFC number is using to produce the product.
Status	The SFC number status
End Unit Number	The end unit number of the shop order to which the SFC belongs.
BOM Component/Version	The name of the component and the version specified in the BOM for the SFC number
Actual Component/ Version	The component, version, and state assembled onto or removed from the SFC number. Displayed as a link if the component has not been removed .
Qty Assembled/Required	Qty Assembled: The quantity of the component already assembled onto the SFC number Note that when the component is a piece on a panel, Qty Required and Qty Assembled indicate quantities for the piece at the location displayed in the Location column Qty Required: The quantity of the component specified in the BOM for the SFC number
Add	Displays the Add Component screen for the component selected in the table
Remove	Displays the Remove Component screen for the component selected in the table Note that component state cannot be Unassembled or Removed.
Actions	Displays the Actions screen

Add Component Screen
Field	Description
Component	The component you are assembling onto the SFC number
Location	If the SFC number is a panel, specifies the location of the piece of the panel where you are adding the component
Qty Required	The quantity in the BOM required to be assembled for this component
Ref Des	The component’s reference designator as specified in the BOM
Component Type	Manual: The component was assembled by an operator who entered information about the component in the assembly point screen. Time-Based: The component was assembled by a resource through time-based component traceability (see Time-Based Genealogy). Auto: The component was automatically assembled by the system Alternate: The component assembled was an alternate to the primary BOM component.
Assembly Operation	The operation at which the component is being assembled
Assembly Resource	The resource at which the component is being assembled
Qty Assembled	The quantity that has already been assembled for this component
Qty to Assemble	The quantity of this component you are assembling

Remove Component Screen
Field	Description
Qty to Remove	The quantity of the actual component that the operator is to remove from the SFC number
Remove Operation	The operation at which the actual component is being removed
Remove Resource	The resource at which the actual component is being removed
Scrap	Scraps the component, making it unavailable for further use
Return	Returns the component inventory ID or SFC number to floor stock Caution Use only with a component that has an SFC number or an inventory ID End of the caution.

Actions Menu
Field	Description
Add Non-BOM Component	Displays the Add Component screen, allowing you to enter information about a non-BOM component Note that this action is not displayed if the Allow Non-BOM Components on Add system rule is set to false.
Remove All Assembled Components	Removes all assembled components from the retrieved SFC number. If an assembled component has been retrieved using the Filter by Component field, only this component will be removed. Note that this action is not displayed if the ALLOW_REMOVE_ALL activity rule is set to FALSE
Show Sub-Assembly SFC	Opens a new As-Built Configuration screen for the subassembly selected in the table

More Information

As-Built Summary Report