ANSI_SUBSTRING Option [TSQL]
Controls the behavior of the SUBSTRING (SUBSTR) function when
negative values are provided for the start or length parameters.
ASE_BINARY_DISPLAY Option
Specifies that the display of SAP IQ binary
columns is consistent with the display of
SAP ASE binary
columns.
ASE_FUNCTION_BEHAVIOR Option
Specifies that output of SAP IQ functions,
including INTTOHEX and HEXTOINT, is consistent
with the output of SAP ASE
functions.
BASE_TABLES_IN_RLV_STORE Option
Registers newly created tables in the RLV store, enabling
row-level versioning. RLV-enabled tables are eligible for multiple writer concurrent access. You
can override this setting at the table level using the CREATE_TABLE statement.
BLOCKING Option
Controls the behavior in response to locking conflicts.
BLOCKING is not supported on
secondary nodes of a multiplex.
BLOCKING_TIMEOUT Option
Controls the length of time a transaction waits to obtain a lock.
BLOCKING_TIMEOUT is not supported on
secondary nodes of a multiplex.
CACHE_AFFINITY_PERCENT Option
The maximum percentage of main buffer cache to use for affinity.
Non-affinity data can use this area if insufficient affinity data exists.
CHECKPOINT_TIME Option
Set the maximum length of time, in minutes, that the database
server runs without doing a checkpoint.
CONVERSION_MODE Option
Restricts implicit conversion between binary data types (BINARY, VARBINARY, and LONG BINARY) and other non-binary data types (BIT, TINYINT, SMALLINT, INT, UNSIGNED
INT, BIGINT, UNSIGNED
BIGINT, CHAR, VARCHAR, and LONG VARCHAR) on various operations.
Also allows all explicit conversions to be permitted as implicit conversions on various
operations.
DEBUG_MESSAGES Option
Controls whether or not MESSAGE
statements that include a DEBUG ONLY clause are executed.
DEFAULT_KB_PER_STRIPE Option
Sets an upper threshold in KB on the amount to write to a stripe before
write operations move on to the next stripe.
DISABLE_RI_CHECK Option
Allows load, insert, update, or delete operations to bypass
the referential integrity check, improving performance.
DQP_ENABLED Option
Temporary database option DQP_ENABLED allows you to enable or disable distributed query processing at
the connection level.
DQP_ENABLED_OVER_NETWORK Option
Temporary database option DQP_ENABLED_OVER_NETWORK allows you to enable or disable distributed query
processing over the network at the connection level.
EXTENDED_JOIN_SYNTAX Option
Controls whether queries with an ambiguous syntax for multi-table
joins are allowed or are reported as an error.
FORCE_DROP Option
Causes SAP IQ to leak, rather than reclaim,
database disk space during a DROP command.
FP_LOOKUP_SIZE Option
Specifies the number of lookup pages and cache memory allocated for Lookup
FP indexes in SAP IQ
15.
databases.
FPL_EXPRESSION_MEMORY_KB Option
Controls the use of memory for the optimization of queries
involving functional expressions against columns having enumerated
storage.
GARRAY_PAGE_SPLIT_PAD_PERCENT Option
Determines per-page fill factor during page splits on the garray and
specifies the percent of space on each HG garray page to reserve for future
incremental inserts.
HASH_THRASHING_PERCENT Option
Specifies the percent of hard disk I/Os allowed during
the execution of a statement that includes a query involving hash
algorithms, before the statement is rolled back and an error message
is reported.
HG_SEARCH_RANGE Option
Specifies the maximum number of Btree pages used in evaluating a range
predicate in the HG index.
HTTP_SESSION_TIMEOUT Option
Specifies the amount of time, in minutes, that the client
waits for an HTTP session to time out before giving up.
INDEX_ADVISOR Option
Generates messages suggesting additional column indexes that
may improve performance of one or more queries.
JAVA_VM_OPTIONS Option
Specifies command line options that the database server uses
when it launches the Java VM.
LOGIN_MODE Option
Controls the use of standard, integrated, Kerberos, LDAP, and PAM logins
for the database.
MAX_CUBE_RESULT Option
Sets the maximum number of rows that the IQ optimizer considers
for a GROUP BY CUBE operation.
MAX_CURSOR_COUNT Option
Specifies a resource governor to limit the maximum number
of cursors that a connection can use at once.
MAX_HASH_ROWS Option
Sets the maximum number of rows that the IQ optimizer considers
for a hash algorithm.
MAX_IQ_THREADS_PER_TEAM Option
Controls the number of threads allocated to perform a single
operation (such as a LIKE predicate on a column)
executing within a connection.
MAX_JOIN_ENUMERATION Option
Controls the maximum number of tables to be optimized for
join order after optimizer simplifications have been applied.
MAX_PARTITIONED_HASH_MB Option
Sets an upper bound, expressed in megabytes, on the amount of temporary cache space
that the optimizer can assume will be available for hash-partitioned hash-based query
operators.
MAX_RV_REMOTE_TRANSFER_MB Option
Limit the volume of
RLV-enabled table data allowed to be transferred from the RLV store when a statement is
executed on another node.
MAX_STATEMENT_COUNT Option
Specifies a resource governor to limit the maximum number
of prepared statements that a connection can use at once.
MPX_AUTOEXCLUDE_TIMEOUT Option
Timeout for autoexcluding a secondary node on the coordinator node. This
option does not apply to the designated failover node.
MPX_HEARTBEAT_FREQUENCY Option
Interval until the heartbeat thread wakes and performs periodic
operations, such as checking for coordinator connectivity and cleaning up the connection
pool on the secondary node. The heartbeat thread maintains a dedicated internal connection
from secondary server to coordinator.
MPX_LIVENESS_TIMEOUT Option
Time, in seconds, before a heartbeat on a secondary server declares
the coordinator offline if the heartbeat fails to reconnect to the coordinator after the
first disconnect. This option also determines how long the coordinator keeps a global
transaction in a suspended state.
MPX_WORK_UNIT_TIMEOUT Option
Time, in seconds, before a multiplex DQP leader reassigns incomplete distributed work to another DQP worker node.
NOEXEC Option
Generates the optimizer query plans instead of executing the
plan.
POST_LOGIN_PROCEDURE Option
Specifies a login procedure whose result set contains messages
that are displayed by the client application immediately after a
user successfully logs in.
PRECISION Option
Specifies the maximum number of digits in the result of any
decimal arithmetic, for queries on the catalog store only.
PREFETCH Option
Allows you to turn fetching on or off or to use the ALWAYS
value to prefetch the cursor results, even for SENSITIVE cursor types
and for cursors that involve a proxy table.
PRESERVE_SOURCE_FORMAT Option [database]
Controls whether the original source definition of procedures,
views, and event handlers is saved in system files. If saved, the formatted source
is saved in the column source in SYSTABLE, SYSPROCEDURE,
and SYSEVENT.
QUERY_DETAIL Option
Specifies whether or not to include additional query information
in the Query Detail section of the query plan.
QUERY_PLAN Option
Specifies whether or not additional query plans are printed to the
SAP IQ message file.
QUERY_PLAN_MIN_TIME Option
Specifies a threshold for query execution. The post-query
plan is generated only if query execution time exceeds the threshold.
QUERY_PLAN_TEXT_ACCESS Option
Enables or prevents users from accessing query plans from the Interactive
SQL client or from using SQL functions to get plans.
QUERY_TIMING Option
Determines whether or not to collect specific timing statistics
and display them in the query plan.
RECOVERY_TIME Option
Sets the maximum length of time, in minutes, that the database
server takes to recover from system failure.
RV_AUTO_MERGE_EVAL_INTERVAL Option
This option configures the evaluation period used to determine when an automated
merge of the row-level versioned (RLV) and IQ main stores should occur.
RV_MERGE_TABLE_MEMPERCENT Option
Sets the percentage of memory used as a merge threshold for an RLV-enabled table. If the
memory used surpasses the threshold, a merge will occur..
RV_MERGE_TABLE_NUMROWS Option
Sets the number of rows used as a merge threshold for an RLV-enabled table. If the
number of rows used surpasses the threshold, a merge will occur.
SCALE Option
Specifies the minimum number of digits after the decimal point
when an arithmetic result is truncated to the maximum PRECISION,
for queries on the catalog store only.
SNAPSHOT_VERSIONING Option
Controls whether RLV-enabled tables are accessed using single-writer table-level
versioning, or multiple writer row-level versioning. Applies to RLV-enabled tables only.
SIGNIFICANTDIGITSFORDOUBLEEQUALITY Option
Specifies the number of significant digits to the right of
the decimal in exponential notation that are used in equality tests
between two complex arithmetic expressions.
TEMP_EXTRACT_APPEND Option
Specifies that any rows extracted by the data extraction facility
are added to the end of an output file.
TEMP_EXTRACT_BINARY Option
In combination with the TEMP_EXTRACT_SWAP option,
specifies the type of extraction performed by the data extraction facility.
TEMP_EXTRACT_DIRECTORY Option
Controls whether a user is allowed to use the data extraction facility.
Also controls the directory into which temp extract files are placed and overrides a directory
path specified in the TEMP_EXTRACT_NAMEn options.
TEMP_EXTRACT_ESCAPE_QUOTES Option
Specifies whether all quotes in fields containing quotes are
escaped in the output of the data extraction facility for an ASCII
extraction.
TEMP_EXTRACT_NAMEn Options
Specifies the names of the output files or named pipes used by the data
extraction facility. There are eight options: TEMP_EXTRACT_NAME1 through
TEMP_EXTRACT_NAME8.
TEMP_EXTRACT_QUOTE Option
Specifies the string to be used as the quote to enclose fields in the
output of the data extraction facility for an ASCII extraction, when either the
TEMP_EXTRACT_QUOTES option or the
TEMP_EXTRACT_QUOTES_ALL option is set ON.
TEMP_EXTRACT_QUOTES Option
Specifies that string fields are enclosed in quotes in the
output of the data extraction facility for an ASCII extraction.
TEMP_EXTRACT_QUOTES_ALL Option
Specifies that all fields are enclosed in quotes in the output
of the data extraction facility for an ASCII extraction.
TEMP_EXTRACT_SWAP Option
In combination with the TEMP_EXTRACT_BINARY option,
specifies the type of extraction performed by the data extraction facility.
TRUSTED_CERTIFICATES_FILE Option
Specifies the trust relationship for outbound Transport Layer Security
(TLS) connections made by LDAP User Authentication, INC, and MIPC connections.