The calculation basis is defined in the adjustment data for the contract.
This example is based on the settings for currency units. If you use units of measurement or quantities, consider this example as a rough approximation (the Amount/UnitMeas field is displayed instead of the % field).
Starting point
You have defined the adjustment data of a condition type as follows:
Settlement variant: 01/01/1997 - 06/30/1997
Reporting interval: Per quarter
Sales from |
Sales upto |
% (or Amnt/UnitMeas.) |
Min. rent/grading |
0 |
20000 |
10.0 |
|
0 |
30000 |
11.0 |
|
0 |
40000 |
12.0 |
|
0 |
0 |
13.0 |
7000.00 |
Sales reports
The following sales reports are submitted:
Reporting interval 01/01/1997 - 03/31/1997 |
USD 18000 |
Reporting interval 04/01/1997 - 06/30/1997 |
USD 25000 |
Total |
USD 43000 |
Result of sales settlement
On the basis of the sales settlement the following amount was calculated for this condition type:
Calculated sales-based rent = 43000 * 0.13 = USD 5590
Since the sales-based rent calculated falls below the minimum rent for the sales grading, the system adopts a sales-based rent of USD 7000.