The calculation basis is defined by means of the adjustment data for the contract.
This example is based on the settings for currency units. If you use units of measurement or quantities, consider this example as a rough approximation (the Amount/UnitMeas field is displayed instead of the % field).
Starting point
You have defined the adjustment data of a condition type as follows:
Settlement variant: 01/01/1997 - 06/30/1997
Minimum rent: USD 5600
Reporting interval: Per quarter
Sales gradings (USD):
Sales from |
Sales up to |
% (or Amnt/UnitMeas.) |
0 |
20000 |
10.0 |
0 |
30000 |
11.0 |
0 |
40000 |
12.0 |
Sales reports
The following sales reports are submitted:
Reporting interval 01/01/1997 - 03/31/1997 |
USD 18000 |
Reporting interval 04/01/1997 - 06/30/1997 |
USD 25000 |
Total |
USD 43000 |
Result of sales settlement
On the basis of the sales settlement the following amount was calculated for this condition type:
Calculated sales-based rent = 43000 * 0.12 = USD 5160
Since this amount is smaller than the specified minimum rent , the minimum rent (USD 5600) is established as the sales-based rent.
If the maximum rent had been specified to be USD 5000 , the system would not have taken the amount of USD 5160 as the basis for the sales-based rent but the maximum amount of USD 5000.