Reversing Device Removals Locate this document in the navigation structure

Use

This procedure enables you to cancel device removals.

Prerequisites

You have carried out a device removal that you want to reverse.

You must reverse any stock transfers you have carried out. The device must be available. To do this, choose   Utilities Industry   Device Management   Technology   Device   Device Transfer via Serial Numbers   or   Device   General Inventory Management   Goods Movement   Transfer Posting   .  

Procedure

  1. Perform the removal reversal.

  2. The device has now been technically installed .

  3. Create any device allocations or relationships you may have terminated.

  4. Install the device ( billing-related installation ) in all installations on the removal date.

  5. You can determine the removal date in the following way:

  • Go to the Utilities Industry menu and choose Device Management > Installation > Installation Structure > Rate Dates

or

  • Go to the Utilities Industry menu and choose Device Management > Technology > Device in the Removal Date field.

Result

The device removal has been fully reversed (technically and billing-related. The device is installed.

Example

Initial Situation

Device D1 was fully removed on the 10 February 2000; this means both technically removed from device location DL1 and billing-related from installations 1 and 2.

( )

Reversing Device Removals:

You want to reverse the device removal. Proceed as follows:

  1. Reverse the technical removal from device location DL1 for the 10 February 2000.

  2. ( )

  3. Perform a billing-related device installation of device D1 in the installation 1 (Inst.1) for February 10, 2000.

  4. Perform a billing-related device installation of device D1 in the installation 2 (Inst.2) February 10, 2000.

( )