Show TOC

 Certification Locate this document in the navigation structure

Use

This function enables you to certify devices that have lost their calibration validity. A device might be certified due to a destroyed seal or as part of periodic replacement or company inspection.

Prerequisites

You can certify devices at any time. There are no prerequisites for certification.

Features

Devices are certified based on the certification year. You can limit a certification to devices of a certain device category. You can specify whether only installed devices or only removed devices are to be certified.

The following restrictions apply to the certification year:

Devices can usually be certified for the current year (system year) and previous years. You can only certify devices for the following year (system + 1) after September 30 of the current year.

Example Example

Certification date: 09/30/1998 or 10/01/1998

Certification years permitted: 1998 and earlier or 1999 and earlier

End of the example.

Subsequently, by specifying the device serial number, you can enter all devices to be certified in the table. If a device belongs to a device group, the rest of the devices of the device group can be included in the table automatically. For each device, you can specify certification number, a certification type and a seal code.

You can also enter the readings of all registers of the devices to be certified. Note that the meter readings you specify do not undergo a validation.