IDoc for Stock Movements with Storage Units
Definition
Using IDoc WMSUID01, you report stock movements of storage units (SUs), for example stock transfers, from the external system to the WMS.
We recommend simulating construction and transmission of the IDocs to the WMS in order to test the relevant activities. Report RLSUMO00 is available for the test.
Use
Prerequisite
You have already created the SU that you want to move in the external system in the WMS. The data on the SU is available in the WMS.
Features
When you trigger a stock transfer of SUs in the external system, or when the external system determines the final storage bin for a SU in a high rack storage area for putaway of the SU, the external system reports the stock movement data to the WMS.
In certain cases, it is necessary to trigger a stock transfer of storage units in the external system. For putaway of a pallet, it can also make sense for the external system to assign the final storage bin for the material in a high rack storage area. The external system must report the executed movement of a SU to the WMS. The WMS subsequently posts the reported SU movement in the system.
Using IDoc WMSSUID01, you can also transfer the external target processing time for the stock movement to the WMS.
Putaway Using an Identification (ID) Point
If you putaway the SU using an ID point, you can call function module L_SU_MOVE_LSR synchronously in the WMS in place of IDoc WMSUID01. In doing so, you avoid inadvertent double posting in the WMS.
If the SU has already been putaway from the ID point, the function module reads the corresponding destination storage bin and reports this to the WMS.
Structure
Message Type
You define message type WMSUMO for the inbound partner profile.
Segments
The IDoc consists of segment E1LSUMX with the following fields:
Segment definition E2LSUMX001 (Move storage unit IDoc segment) as of release 4.0A
Field |
Data Type |
Description |
Required Entry |
Note |
LGNUM |
CHAR 3 |
Warehouse number |
X |
|
LENUM |
CHAR 20 |
Storage unit number |
X |
|
BWLVS |
CHAR 3 |
Movement type Warehouse Management |
X |
|
LETYP |
CHAR 3 |
Storage unit type |
You do not always have to transfer this field |
|
LZNUM |
CHAR 20 |
Additional reference number |
You use this field for transfer of a transfer order |
|
BNAME |
CHAR 12 |
User name |
||
KZQUI |
CHAR 1 |
Indicator: Confirmation required |
Normally you do not set this field since the stock movement that is transferred has usually already been executed and therefore no longer requires confirmation. |
|
VLTYP |
CHAR 3 |
Source storage type |
Is available in the WMS |
|
VLBER |
CHAR 3 |
Source storage area |
Is available in the WMS |
|
VLPLA |
CHAR 10 |
Source storage bin |
Is available in the WMS |
|
VPPOS |
CHAR 2 |
Item in source storage bin |
||
NLTYP |
CHAR 3 |
Destination storage type |
||
NLBER |
CHAR 3 |
Destination storage area |
||
NLPLA |
CHAR 10 |
Destination storage bin |
||
NPPOS |
CHAR 2 |
Item in source storage bin |
You only use this field with putaway strategy P. The field gives the exact position of the SU in the shelf section. |
|
STATU |
CHAR 1 |
Status of storage unit |
Not used for transferring from the external system to the WMS |
|
REFNR |
CHAR 10 |
Group |
Not used for transferring from the external system to the WMS |
|
PERNR |
8 R |
TO processor (personnel number) |
||
SOLEX |
15 R |
Target processing time from external system |