Plan Input Processing for Measured Values in the EWB (SAP Library - Inspection Planning with the Engineering Workbench)

Plan Input Processing for Measured Values in the EWB

Use

You must plan input processing at the inspection planning stage to ensure that the system automatically processes your measured values according to your specifications during results recording. As a result, during results recording, the BAdI that has been defined for the inspection characteristic is run and the input value is processed.

In the Engineering Workbench, you can plan the data for input processing on the characteristic detail screen and on the overview screen (tab page Quantitative Data) of an inspection plan. You can access an existing master inspection characteristic and use it during this planning stage.

Prerequisites

In Customizing, the instance of the BAdI parameter for the input-processing key must be defined. Thereby, you define how the input value (measured value) is to be processed.

Procedure

Choose SAP Menu ® Logistics ® Quality Management ® Quality Planning ® Inspection Planning ® Inspection Plan ® Workbench.

Enter the required work area and choose Continue.

On the selection screen, enter your selection data and choose Load Task Lists.

Choose the Quality Management tab page.

Select the required plan and choose Operations to access the operations overview.

Select the required operation and choose Task Lists -> Inspection Characteristics to access the inspection characteristics overview.

To plan input processing

in the inspection characteristic overview,

on the characteristic details screen,

you can do the following:

On the Control Indicators tab page, in the Formula column, you choose Input Processing. The system automatically switches to the detail screen for the quantitative data. You can now enter the input-processing key. If you enter No Formula or Calculated Characteristic, the key will automatically be deleted (a corresponding message will be output).
In the quantitative data, you enter an input-processing key. Input Processing will automatically be set by the system in this case.

select the inspection characteristic that you wish to use input processing for, and choose Details.

On the Control Indicators... tab page, set the radio button for input processing.

The system automatically switches to the detail screen for the quantitative data. You can now enter the input-processing key.

Note

If the control indicator Input Processing is not set, you cannot enter a key for input processing on the characteristic overview screen.

Note

The radio buttons Calculated Characteristic and Input Processing cannot both be set at the same time. This means:

When the radio button Calculated Characteristic is set, you cannot set the radio button Input Processing and you cannot enter the input-processing key.

When you set the radio button Calculated Characteristic, the radio button Input Processing and the input-processing key are reset by the system.

When you set the radio button No Formula, the radio button Input Processing and the input-processing key are reset by the system.

Assign the three-digit input-processing key that was defined in Customizing to the inspection characteristic.

Note

If the Input Processing radio button is not set, the field for input processing in the quantitative data is not visible.

If the Input Processing radio button is set, you must enter an input-processing key.

If the radio button Input Processing is reset, the input processing key is deleted automatically by the system.

If the included master inspection characteristic is an incomplete copy model, you must enter an input-processing key in the plan if the Input Processing radio button is set.

Save the data.

Result

As a result, during results recording, the BAdI method that has been assigned to this inspection characteristic is run and the input value is processed.

Plan Input Processing for Non-Classed Measured Values in the Master Inspection Characteristic

Input Processing of Non-Classed Measured Values in Results Recording