Entering Inspection Results 

Usage

You inspect each individual Handling Unit (sample) and record the results of the quality inspection.

Procedure

  1. If required, call up the worklist as follows:
    2.

    Menu Path

    Logistics ® Quality Management ® Quality Inspection ® Worklist ® Inspection ® Change Data

    Transaction Code

    QA32

  2. Enter the following data:
    3.

    Field

    Data

    Plant

    1000

    Insp. lot origin

    01

    Material

    QS8X25

    List settings

    Select only inspection lots without a usage decision

  3. Choose .

    4. The current inspection lot appears in the worklist.

    Using this worklist, you can enter inspection characteristic values and defect data. When an inspection characteristic is rejected, the system automatically creates a defect data record.

    You only need to record results when an inspection characteristic or Handling Unit (physical sample) is rejected.

    In the preceding inspection, you noted that the label on the first Handling Unit is illegible. On the basis of this, you record a suitable evaluation of the "label" inspection characteristic.

  4. Select the current inspection lot and choose Results.

    5. The inspection plan contains two operations. You can select one of these two operations.

  5. Select the operation Visual inspection and choose .
  6. In the dialog box, choose Assigned insp. points.
  7. In the list that appears, double-click on the line containing the first physical sample.
  8. On the characteristic overview screen, select the Reject field in the line containing the "label" inspection characteristic and enter "Illegible" in the Inspection description field.
  9. Choose (Close) and .
  10. Do not leave the worklist

You can make the usage decision for the inspection lot from the results recording worklist.