Maintaining the PI Sheet for Inspection 

  1. On the Find PI sheet screen, enter the following data:
    2.

    Field

    Data

    Control recipe

    Control recipe number for destination L1

    Alternatively, search by
    Plant
    Ctrl rec.destination
    Material number


    1100
    L1
    CH_4100

    All other entry fields

    Delete default values

  2. Choose .
  3. Double-click your process order number to select the PI sheet.
  4. Choose PI sheet ® Display -> Maintain.
  5. To call up results recording for Quality Management, double-click Record inspection results (yellow) in phase 410 /, process instruction 0010.
  6. Choose .
  7. On the Record Results: Characteristic Overview screen, double-click inspection characteristic 010, Degree of hardness to get to the Record Results for CH_4100: Characteristic Single Screen.
  8. Enter the following data:
    9.

    Field

    Data

    Mean value

    Valid measured value that lies within the upper and lower tolerances

  9. Choose . The status of the line is set to 5 (Processing is completed), and the characteristic is accepted () since the measurement value was within the tolerances.
  10. Choose . You now see characteristic 020.
  11. On the Record Results for CH_4100: Single Values for Characteristic screen, enter the following data:
    12.

    Field

    Data

    Measured value

    Valid measured value that lies within the upper and lower tolerances

  12. Choose . The status of the line is set to 5 (Processing is completed), and the characteristic is accepted () since the measurement value was within the tolerances.
  13. Choose .

    14. You return to the PI Sheet: Maintain screen.

  14. Enter the signature for the end of phase 410.
    15.

    Field

    Data

    Phase end 0410

    Your user ID

  15. Choose .
  16. Choose PI sheet ® Set to complete.
  17. Choose until the overview tree appears.