Recording Results by Lot 

  1. Call up the transaction as follows:
    2.

    Menu Path

    Logistics ® Quality Management ® Quality Inspection ® Worklist ® Results Recording

    Transaction Code

    QE51N

  2. Enter the following data:
    3.

    Field

    Data

    Plant

    1100

    Insp. lot origin

    01

    Material

    CH_1302

  3. Choose .

    4. There may be two inspection lots for material CH_1302.

  4. Choose to select the lines Viscosity, Density, and Solids content for the first inspection lot and then choose .

    5. The Record Results for CH_1302 ###: Single Values for Characteristic screen for characteristic 9501, Viscosity appears.

  5. Enter the following data:
    6.

    Field

    Data

    Measured value

    (single value)

    Measured value from the area Specs Fixed insp.scope values between Upper lim. & Lower lmt

  6. Choose and repeat this entry for the remaining measured values.

    7. In the Results screen area, you see the number of results checked and the number of results with errors. The system calculates the mean value and the standard deviation based on your entries.

  7. If the system has not yet reported completion (in the status bar), choose .

    8. The status is now 5 (Processing completed).

  8. Choose .

    9. You can now enter the results for the characteristic 9502 Density.

  9. Enter the following data:
    10.

    Field

    Data

    Mean value

    A measured value that lies within the upper and lower tolerance levels.

  10. Choose .

    11. The status is now 5 (Processing completed). The characteristic is accepted.

  11. Choose .

    12. You can now enter the results for the characteristic 9503 Solids content.

  12. Enter the following data:
    13.

    Field

    Data

    Measured value

    (single value)

    Valid measured value that lies within the upper and lower tolerances

  13. Choose .

    14. To skip any information dialog boxes, choose .

    Repeat this entry for a total of three measured values.

  14. Choose .
  15. Choose .
  16. Write down the inspection lot number in the Inspection lot field.
  17. Choose .

    18. You are back on the Results Recording Worklist with a list of inspection lots.

  18. To branch into the inspection lot that is currently being processed, choose .

    19. Green indicates that the individual inspections have been carried out, and that the system has accepted the results.

  19. If any other batches exist, carry out the inspections as described above. Update the inspection lot list each time and check the status of the individual inspections and the complete inspection lot using the color legend.

    20. The system highlights all inspection lots and individual inspections in color. The light red color indicates that the inspection lot or the individual checks have not yet been executed.

  20. Choose until the overview tree appears.

If a dialog box should appear, choose Yes.