Replacing Equipment 

  1. From the main screen, choose Logistics ® Plant maintenance ® Technical objects ® FunctLocation ® Change.

    2. The screen Change Functional Location: Initial, is displayed.

  2. Make all the necessary entries for the functional location in the initial screen and then choose either Goto ® Location data or Goto ® PM data.

    3. The functions for installing/dismantling are on both screens.

  3. Choose Structure ® Equipment.

    4. You are now on the screen Installation Location: Equipment Overview, on which you see a list of all the pieces of equipment installed at this functional location, is displayed.

    For information on how to change the position number of the installed pieces of equipment, see Changing the Position Number.

  4. Select the pieces of equipment which you want to dismantle from the functional location.
  5. Choose Edit ® Replace equipment.
  6. Specify the pieces of equipment that the selected pieces of equipment are to replace. Select Confirm.

    7. You are now back on the screen Installation Location: Equipment Overview, on which you now see the list with the new pieces of equipment, is displayed.

  7. Here you may enter the installation time, which differs from the date and system time, for each new piece of equipment.
  8. Using Extras ® Change log, you can display:

If you want to use the Data transfer function for the replaced pieces of equipment, proceed as described in Data Transfer.
  1. Return to the Maintenance data or Location data screen and save the modification.