The master records for the functional location and the pieces of equipment must already be created in the system. You can install several pieces of equipment at the functional location.
From the main menu, choose
The screen
Change Functional Location: Initial
, is displayed.
Make all the necessary entries for the functional location in the initial screen and then choose either
The functions for installation/dismantling can be selected from either screen.
To do this, choose
If no pieces of equipment have yet been installed at the functional location, you go to the screen
Installation Location: Install Equipment
.
If pieces of equipment have already been installed at the functional location, you go to the screen
Installation Location: Equipment Overview
, on which you see a list of all the pieces of equipment installed at this functional location.
Select
Installation Location: Install Equipment
.
For how to change the position number of the installed pieces of equipment, see Changing the Position Number .
Enter the pieces of equipment that you want to install at the functional location in the section
Equipment
.
Now you can choose
to display:Which pieces of equipment are installed
Which pieces of equipment were installed before this installation
Which pieces of equipment are installed after this installation
Note
If you want to use the
Data transfer
function for the newly installed pieces of equipment, proceed as described in
Data Transfer
.
Return to the Maintenance data or Location data screen and save the installation.