Show TOC

 Maintaining Default Values (Mass Replace) Locate this document in the navigation structure

When you use the mass replace function to replace work centers, you can add to or change the default values and activity types proposed in the new work center for the operations in a routing. The default values in the work center master data do not change. You can also copy standard values, such as setup time.

You cannot change a default value in the new work center if you have set a reference indicator for the value. You can only change the default value in work center maintenance. Default values and activity types for which you have not set a reference indicator in the work center can be entered or changed.

Specific rules exist for transfering default values from the new work center and getting values from the old work center. For additional information, refer to Default Values .

Proceed as follows to change the default values for a new work center:

  1. Follow steps 1 through 3 of Replacing Work Centers (Mass Replacement) .

  2. Select the menu options   Settings   Change new work cntr   or press the corresponding function key.  

  3. You reach the dialog box Default Values : Change .

  4. Enter the key date for selecting an operation, if you have not already done so.

  5. Change or add to the default values for the operations, standard values and activity types.

    Set the Transfer value indicator for all default values that you want to transfer to the operation when the work center is replaced.

  6. Press Continue .

You return to the transaction for replacing a work center.