You use this activity to create nonconformance clients. A nonconformance client defines nonconformance options for operators who enter failure, defect, and repair information in the system. For more information, see NC Clients.
After you create a nonconformance client, you must enter it in POD Maintenance (see POD Maintenance).
The following tables describe fields requiring explanation:
Field |
Description |
---|---|
Incident Number |
None: Disables the incident number feature Manual: Allows the operator to enter a value in the Incident Number field in NC Data Entry Automatic: Automatically populates a value in the Incident Number field in NC Data Entry according to the incident number pattern defined in Next Number Maintenance. Operators can change the incident number that the system automatically enters in that field. |
Preload NC Fields |
Specifies which NC fields (Failure ID, Ref Des, Both, or None) to preload from the primary NC when logging a secondary NC code |
Component Disposition Routing |
Specifies the disposition routing where the system sends the removed component |
Select Default NC Code |
If selected, automatically selects the default NC code in the Available NC Codes list. |
Display Combined Add-Done Button |
If selected, the Add and Done button appears in Log NC (NC Data Entry) and Standalone NC Logging. |
Do Disposition |
If selected, automatically dispositions the nonconformed SFC numbers or process lot based on the NC code configuration |
Can Log Primary NC Code |
If selected, operators can log primary NC codes |
Can Log Against Closed NC Code |
If selected, operators can log an additional nonconformance against a failure, defect, or repair that has been logged and closed |
Prompt to Log Secondary NC Code |
If selected, prompts operators to log a secondary NC code when they log a primary NC code |
Display As-Built Link |
If selected, a link to the As-Built Configuration activity appears in NC Data Entry |
Display Work Instruction Button |
If selected, the Work Instructions button appears in NC Data Entry |
Field |
Description |
---|---|
NC Code Display Criteria |
NC Code: Sorts the Available NC Codes list in Log NC Client by NC code NC Code Description: Sorts the Available NC Codes list in Log NC Client by NC code description Priority: Sorts the Available NC Codes list in Log NC Client by priority |
NC Code Description in List |
If selected, NC code descriptions appear in the Available NC Codes list. |
Field |
Description |
---|---|
NC Data Tree List |
The nonconformance list created in List Maintenance that appears in the NC Tree plug-in for this NC client The list controls the columns that appear and in which order they appear. |
Allow Edit |
If selected, allows operators to change NC code states. |
Field |
Description |
---|---|
Number of Verified Defect Bars |
Defines the number of verified defect bars to display Note The value must be greater than 0. End of the note. |
Display Component/Description on Chart |
If selected, displays component and component description on the Verified Defect Pareto chart |