The following tables describe activities that are associated with buttons on the predefined Operation
, Work Center
and Message Board
PODs.
Note
Some activities have rules that allow you to change the way they behave. For more information, see field help for individual activities.
POD Button Activity | Activity ID | Description |
---|---|---|
|
| Starts the selected SFC numbers, shop order, and process lot at the entered operation and resource, and displays them as selected and active in the Validates that the selected resource is in a current status to process product and is in a status permitted to produce product (see Start) |
|
| Completes the SFC numbers selected in the Note If you complete an SFC number that belongs to a process lot, you must remove it from the process lot first. The POD displays a message stating this. Choose the End of the note. Completes a selected SFC number at selected operation to indicate that the SFC number has completed processing and is ready to be worked at the next operation Note If other users are currently working on the same operation of an SFC number, the POD displays a message stating this and lets you choose whether to complete/sign off the SFC number, or to cancel completing the SFC number. Choose End of the note. |
|
| Removes selected SFC numbers from the Resets the resource from Places a selected SFC number at selected operations to indicate that the SFC number is no longer being actively worked on the shop floor Note If other users are currently working on the same operation of an SFC number, the End of the note. |
|
| Allows the operator to view a list of all work instructions for the selection (see Work Instruction List and Work Instruction) |
|
| Allows the operator to view work instructions You must set up work instructions in the system before users can view them (see Work Instruction Viewer). |
|
| Allows the operator to view all components to be assembled for the selected SFC numbers and then filter the components to the selected operations (see Component List). |
|
| Collects assembly data for components to be assembled for a selected SFC number at selected operations (see Assembly Point (Assemble Components)) |
|
| Allows the operator to view all DC groups to be collected for the selected SFC numbers and then filter the DC groups to the selected operations (see DC Group List). |
|
| Displays data parameter fields in which the operator can enter values, such as room temperature or the thickness of a sample (see Data Collection Entry) Note When setting up a POD with End of the note. |
|
| Displays in a tree view the NC codes that have been logged for the selected SFC numbers at the selected operation (see NC Data Tree). |
|
| Displays the list of NC groups and associated NC codes that have been defined for the selected operation (see NC Selection). |
|
| Allows the operator to log nonconformance codes against one or more selected SFC numbers (see Log NC (NC Data Entry) and NC Client Maintenance) |
|
| Allows the operator to view all tools to be logged for a selected SFC number and then filter the tools to the selected operations (see Tool Group List) |
|
| Allows the operator to log tool numbers for a selected SFC number (see Log Tool Entry). |
|
| Allows you to change the labor charge code (LCC) that the system is currently using to track your time when you are not working on SFC numbers (see Change User Labor Charge Code) |
POD Button Activity | Activity ID | Description |
---|---|---|
|
| Starts the selected SFC numbers at the entered operation and resource, and displays them as selected in the Validates that the selected resource is in a current state to process product and is not in the |
|
| Starts the SFC numbers associated with the entered material at the entered operation and resource, and displays them as selected in the |
|
| Completes the SFC numbers selected in the Note If you complete an SFC number that belongs to a process lot, you must remove it from the process lot first. The POD displays a message stating this. Choose the End of the note. Completes a selected SFC number at selected operation to indicate that the SFC number has completed processing and is ready to be worked at the next operation Note If other users are currently working on the same operation of an SFC number, the POD displays a message stating this and lets you choose whether to complete the SFC number, or to cancel completing the SFC number. Choose End of the note. |
|
| Removes selected SFC numbers from the Resets the resource from Places a selected SFC number at selected operations to indicate that the SFC number is no longer being actively worked on the shop floor Note If other users are currently working on the same operation of an SFC number, the End of the note. |
|
| Allows the operator to view all work instructions for the selection (see Work Instruction List and Work Instruction) |
|
| Allows the operator to view work instructions You must set up work instructions in the system before users can view them (see Work Instruction Viewer). |
|
| Allows the operator to view all components to be assembled for the selected SFC numbers and then filter the components to the selected operations (see Component List). |
|
| Collects assembly data for components to be assembled for a selected SFC number at selected operations (see Assembly Point (Assemble Components)) |
|
| Allows the operator to view all DC groups to be collected for the selected SFC numbers and then filter the DC groups to the selected operations (see DC Group List). |
|
| Displays data parameter fields in which the operator can enter values, such as room temperature or the thickness of a sample (see Data Collection) Note When setting up a POD with End of the note. |
|
| Logs primary NC codes for a selected SFC number at selected operations to indicate that additional work must be performed at the same operation and to automatically reopen all previously closed buyoffs (see Log NC Reject) |
|
| Performs buyoff of a selected SFC number at selected operations to indicate that the user has completed processing and the SFC number can be approved by another user or is ready to be worked at the next operation (see Buyoff Accept) |
|
| Logs the user as starting work on an SFC number in the POD (see Labor On) Note You must assign this activity to the End of the note. |
|
| Logs the user as stopping work on an SFC number in the POD and allows to collect distributed work time (see Labor Off and Collect Work Time) Note You must assign this activity to the End of the note. |
|
| Allows the operator to view all tools to be logged for a selected SFC number and then filter the tools to the selected operations (see Tool Group List) |
|
| Allows the operator to log tool numbers for a selected SFC number (see Log Tool Entry). |
|
| Allows the operator a tree view of key configuration data, all routing steps, and all associated work instructions, data collection, components, and tools for the selected SFC number (see Shop Workbench). |
The following table describes the default list of activities and reports associated with group POD buttons.
POD Button | POD Button Activity and Activity ID |
---|---|
|
|
|
|