You use this activity to create or edit test plans that are used by automated testing equipment or other equipment that can accept a structured parameter set for execution.
Data is collected during the manufacturing process using machine interfaces. The equipment provides parametric data using the values specified in the test plan.
The equipment passes test results back to SAP ME for reporting and optional historical SPC data analysis (see Statistical Process Control (SPC)). The collected data is stored against an SFC number.
The following tables describe fields requiring explanation:
Field | Description |
---|---|
| The unique ID for identifying the test plan |
| Generates a unique ID number for this test plan (optional) |
Field | Description |
---|---|
| Displays the |
| Displays the |
| The unique identifier of the measurement |
| The minimum acceptable measurement value |
| The maximum acceptable measurement value |
| If enabled, the measurement is taken within this test plan |
Field | Description |
---|---|
| The order of the test plan parameters |
| The name of the test plan parameter |
| The value of the test plan parameter |
Field | Description |
---|---|
| The material that is measured according to this test plan |
| The operation at which the measurements must be taken |
| The routing at which the measurements must be taken |
| The resource at which the measurements must be taken |
| The special identifier for this test plan group |
| If selected, applies this test plan to the current version |
| Displays the |
Field | Description |
---|---|
| The ID of the measurement that is a parent for the measurement selected in |
| If selected, the tolerance limits are defined by the external source (for example, test machine) |
Field | Description |
---|---|
| The order of measurement limits |
| The minimum acceptable measurement value per specification |
| The maximum acceptable measurement value per specification |