You can use this function to enter component's data by scanning two-dimensional barcodes when assembling a component on the shop floor or receiving a material to floor stock.
You have verified that the user group to which you belong has the permission to access Barcode Data Format Maintenance
(see User Group Maintenance).
You have defined the barcode data format in Barcode Data Format Maintenance
(see Barcode Data Format Maintenance).
You have either associated the BARCODE_PARSER
hook point activity with the PARSE_COMPONENT
hook point on the Activity Hooks
tab page of Site Maintenance
or specified BARCODE_PARSER
as Assembly Pt Parsing Activity
on the Build
tab page of Material Maintenance
(see Barcode Parser).
You have defined data to collect on assembly, removal, and floor stock receipt on the Build
tab page of Material Maintenance
.
You have set the DISPLAY_BARCODE
activity rule for As-Built Configuration
, Maintain Floor Stock
, or Floor Stock Receipt to
YES
in Activity Maintenance
.
You have connected a 2D barcode reader to a client PC and installed the barcode reader software.
A shop floor operator chooses the Barcode
field, scans a 2D barcode on a component, and tabs out.
The system parses the barcode and does one of the following:
Fills in data in the Data to Collect on Assembly
or Data to Collect on Removal
fields on the As-Built Configuration
screen (see As-Built Configuration)
Fills in data in the Data to Collect on Floor Stock Receipt
fields on the Floor Stock Receipt
or Maintain Floor Stock
screen (see Floor Stock Receipt and Maintain Floor Stock).
Fills in data in the assembly data fields on the Assemble Components
screen. If Component
is one of the fields included in the 2D barcode, one 2D barcode scan selects the component and fills in the assembly data fields (see Assembly Point (Assemble Components)).