Allow Assembly Qty As Required | If set to true , displays the Assembly Qty As Required checkbox on the Component Details screen of BOM Maintenance . Can override at: site |
Allow Multiple Time-Based Assembly | If set to true , an SFC number with time-based components whose entire quantity has been assembled at an assembly operation and time-based resource and then removed using As Built Configuration , can be assembled again when the SFC number is processed at the assembly operation and time-based resource again. The component information that is loaded on the slot is associated with the SFC number using the Component Time Log (COMP_TIME_LOG table). Can override at: site |
Allow Non-BOM Components on Add | If set to true (default), allows operators to add non-BOM components when they assemble SFC numbers through As-Built Configuration . Can override at: site, material, operation, user Related rule: NC Allows Non-BOM Component and Ref Des (see Nonconformance Rules) |
Allow Vers. Change on Purchased Components | If set to true (default), allows users to change the value in the Version field for a purchased component on the Assemble Component and As-Built Configuration screens. Can override at: site |
BOM Name Equals Material Name | If set to true , displays only routing operations in the assembly/disassembly operation browse list of BOM Maintenance for the routing assigned to the material in Material Maintenance . If no routing is assigned to the material, this browse screen displays only current versions of all operations. Can override at: site |
Display Auto Fill Components | If set to true (default), displays auto assembled components in the Component List plug-in. Can override at: site |
Enable Pegging on Release | Associates a subassembly with the top-level shop order during release activities. If set to true , creates a link between the subassembly and the top-level shop order during release activities. Can override at: site, material Note This rule is used with the Create Subassys on Shop Order Release system rule (see Order Rules). End of the note. |
Enforce Pegging on Consumption | true : Allows only the associated component subassembly that was released with the top-level SFC number to be assembled during Genealogy activities (Assembly Point or As-Built Configuration ) false (default): Allows any component subassembly to be assembled onto a top level SFC number during genealogy activities (Assembly Point or As-Built Configuration ) Can override at: site, material Note This rule is used with the Create Subassys on Shop Order Release system rule (see Order Rules). End of the note. |
Max Component Usage Count | The number of times a user can add an inventory ID/SFC number to an assembly during discrete assembly only. Can override at: site, BOM component, material You can override this value at the BOM component level in BOM Maintenance and at the material level in Material Maintenance . On the BOM Component Details screen of BOM Maintenance , you can enter a value into the Max Usage as Component field for each component. On the Build tab page of Material Maintenance , you can enter a value into the Max Usage as Component field. The precedence order is as follows: BOM component, material, site. |
Max Component Usage Message | Specifies the message that the system generates when an Assembly Point user attempts to add an inventory ID/SFC number that has exceeded its usage count to an assembly You must define this message type in Message Type Maintenance . Can override at: site |
Ref Des is Required | If set to yes , requires a reference designator to be entered for a BOM component. The reference designator quantity must be equal to the assembly quantity. Can override at: site |
Ref Des Must be Unique | true (default): Prevents users from entering the same reference designator more than once in the same BOM in BOM Maintenance false : Allows users to enter the same reference designator more than once in the same BOM in BOM Maintenance . In addition, this allows operators to specify the same reference designator for the same component at more than one assembly operation. Can override at: site |
Specific BOM Component Version Required | If set to true , requires users to enter a version for each BOM component on the Component Details screen in BOM Maintenance Can override at: site |
Validate Component Usage | true (default): Prevents users from adding an inventory ID that has exceeded its usage count in Assembly Point or As-Built Configuration . Note You set the usage count with the Max Component Usage Count system rule. End of the note. false : Does not check whether the usage count for the inventory ID has been exceeded when a user adds an inventory ID to an assembly Can override at: site |