During production, you want to have travelers printed when SFC numbers of the ENGINE_MOUNT
material are started on the first operation of the routing (WELDING).
Adobe Document Services
(ADS) component is installed and configured during the SAP NetWeaver installation (see the Prerequisites
section of Setting Up ADS Printing).
Network printer ATL4
is set up on the system network. Printer drivers are installed on the server. SAP NetWeaver Windows Services SAPLKG_00
and SAPLKG_01
(where LKG
is the SAP NetWeaver instance name) are logged on as Windows users having permission to the printer.
Folder D:\Template
is created on the server and shared. Traveler template file TVLR01.XDP
, with ME data fields to be printed, is saved in this folder.
In Routing Maintenance
, you have created a routing with the WELDING
operation as the first step.
In System Rule Maintenance
, under the System Setup
category, you have set up system rules as follows:
System Rule | Site Value |
---|---|
|
|
|
|
|
|
In Document Maintenance
, you have defined the following values for the traveler document to be printed:
Field Name | Value |
---|---|
|
|
| A |
| |
| 1 |
|
|
|
|
|
|
|
|
|
|
| |
All checkboxes selected | |
| |
|
|
| Blank |
|
|
|
|
|
|
|
|
| Selected |
In Material Maintenance
, on the Documents
tab page, you have added TVLR01
to Printing Documents
for the material SHOP_ORDER_TRAVELER
.
In Printer Maintenance
, you have created ATL4
printer with the Enabled
checkbox selected and Traveler
added to the Assigned Document Types
list.
Caution
The printer name defined in Printer Maintenance
must be equal to the printer name used by the operation system on the server where SAP NetWeaver instance of SAP ME application is running.
In POD Maintenance
, on the Printers
tab page, you have specified ATL4
as a Traveler Printer
.
In Operation Maintenance
, on the Activity Hooks
tab page, you have set up ADS Document Print
(SY521
) activity as an activity hook on POST_START
hook point at the first operation (WELDING) . The hook is enabled and User Argument
for it is document name (SHOP_ORDER_TRAVELER
).
To print the traveller when SFC numbers of the ENGINE_MOUNT
material are started on the first operation in the routing (WELDING), proceed as follows:
In default Operation
POD, specify WELDING
as the operation and choose the appropriate resource.
Enter an SFC number of the ENGINE_MOUNT
material.
Start the SFC number. A traveler for the SFC will be automatically printed at the assigned printer.
The figure below illustrates the primary flow of user actions when performing printing of the traveller: