Options
All
  • Public
  • Public/Protected
  • All
Menu

This class represents the entity "ComparisonResultSet" of service "API_BILLOFMATERIAL_COMPARISON_SRV". This service is part of the following communication scenarios: Product Lifecycle Management - Master Data Integration (SAP_COM_0105). See https://api.sap.com/api/API_BILLOFMATERIAL_COMPARISON_SRV for more information.

Hierarchy

  • any
    • ComparisonResultSet

Implements

Index

Properties

Methods

Properties

bomComparisonResult

bomComparisonResult: string

BOM Comparison result. Maximum length: 1.

bomComparisonUuid

bomComparisonUuid: string

Globally Unique Identifier.

bomComponentPrimary

bomComponentPrimary: string

BOM component. Material number of the components that you enter, change or display as part of the BOM. A master record is usually maintained in the system for a component. Maximum length: 40.

bomComponentSecondary

bomComponentSecondary: string

BOM component. Material number of the components that you enter, change or display as part of the BOM. A master record is usually maintained in the system for a component. Maximum length: 40.

bomHeaderBaseUnitPrimary

bomHeaderBaseUnitPrimary: string

Base Unit of Measure. Unit of measure in which stocks of the material are managed. The system converts all the quantities you enter in other units of measure (alternative units of measure) to the base unit of measure. You define the base unit of measure and also alternative units of measure and their conversion factors in the material master record. Since all data is updated in the base unit of measure, your entry is particularly important for the conversion of alternative units of measure. A quantity in the alternative unit of measure can only be shown precisely if its value can be shown with the decimal places available. To ensure this, please note the following: The base unit of measure is the unit satisfying the highest necessary requirement for precision. The conversion of alternative units of measure to the base unit should result in simple decimal fractions (not, for example, 1/3 = 0.333...). Inventory Management In Inventory Management, the base unit of measure is the same as the stockkeeping unit. Services Services have units of measure of their own, including the following: Service unit Unit of measure at the higher item level. The precise quantities of the individual services are each at the detailed service line level. Blanket Unit of measure at service line level for services to be provided once only, and for which no precise quantities can or are to be specified. Maximum length: 3.

bomHeaderBaseUnitSecondary

bomHeaderBaseUnitSecondary: string

Base Unit of Measure. Unit of measure in which stocks of the material are managed. The system converts all the quantities you enter in other units of measure (alternative units of measure) to the base unit of measure. You define the base unit of measure and also alternative units of measure and their conversion factors in the material master record. Since all data is updated in the base unit of measure, your entry is particularly important for the conversion of alternative units of measure. A quantity in the alternative unit of measure can only be shown precisely if its value can be shown with the decimal places available. To ensure this, please note the following: The base unit of measure is the unit satisfying the highest necessary requirement for precision. The conversion of alternative units of measure to the base unit should result in simple decimal fractions (not, for example, 1/3 = 0.333...). Inventory Management In Inventory Management, the base unit of measure is the same as the stockkeeping unit. Services Services have units of measure of their own, including the following: Service unit Unit of measure at the higher item level. The precise quantities of the individual services are each at the detailed service line level. Blanket Unit of measure at service line level for services to be provided once only, and for which no precise quantities can or are to be specified. Maximum length: 3.

bomItemCategoryPrimary

bomItemCategoryPrimary: string

Item Category (Bill of Material). Categorization of the items in a BOM according to set criteria, such as whether they refer to an object (for example, material master or document info record) or whether they are kept in stock. This categorization allows you to process data that is relevant to the individual items in a BOM. The item category is used to control field selection, default values for BOM maintenance, triggering of specific system activities, and so on. Stock item This item category is used to manage material data that allows an item to be kept in stock. Document item This item category is used to manage document data that allows you to process original application data (for example, graphics created with a graphics program). Class item (for configurable BOMs) In configurable material BOMs, you can enter a class as a placeholder for selectable items. The class can contain either materials or documents. When you assign characteristic values while configuring the BOM, the system replaces the node with an object that has the same values as those assigned to the characteristic of the configuration. This makes BOMs with a larger number of variants easier to maintain, as you do not have to enter all items manually and assign a selection condition to them. Class items can be relevant to MRP. PM structure element This item is used to structure an equipment (PM assembly) for design purposes only. If you want to maintain a material for use as a PM structure element, use material type IBAU. Maximum length: 1.

bomItemCategorySecondary

bomItemCategorySecondary: string

Item Category (Bill of Material). Categorization of the items in a BOM according to set criteria, such as whether they refer to an object (for example, material master or document info record) or whether they are kept in stock. This categorization allows you to process data that is relevant to the individual items in a BOM. The item category is used to control field selection, default values for BOM maintenance, triggering of specific system activities, and so on. Stock item This item category is used to manage material data that allows an item to be kept in stock. Document item This item category is used to manage document data that allows you to process original application data (for example, graphics created with a graphics program). Class item (for configurable BOMs) In configurable material BOMs, you can enter a class as a placeholder for selectable items. The class can contain either materials or documents. When you assign characteristic values while configuring the BOM, the system replaces the node with an object that has the same values as those assigned to the characteristic of the configuration. This makes BOMs with a larger number of variants easier to maintain, as you do not have to enter all items manually and assign a selection condition to them. Class items can be relevant to MRP. PM structure element This item is used to structure an equipment (PM assembly) for design purposes only. If you want to maintain a material for use as a PM structure element, use material type IBAU. Maximum length: 1.

bomItemDescriptionPrimary

bomItemDescriptionPrimary: string

Material Description. Text containing up to 40 characters that describes the material in more detail. You can enter one material description in each of any number of languages. In principle, you enter the material description on the data screen of the first user department for which you enter data, and in your logon language. You can overwrite the material description on the Basic Data screen. Maximum length: 40.

bomItemDescriptionSecondary

bomItemDescriptionSecondary: string

Material Description. Text containing up to 40 characters that describes the material in more detail. You can enter one material description in each of any number of languages. In principle, you enter the material description on the data screen of the first user department for which you enter data, and in your logon language. You can overwrite the material description on the Basic Data screen. Maximum length: 40.

bomItemPricePrimary

bomItemPricePrimary: BigNumber

Price. Amount for non-stock item, which is used when costing the end or intermediate product for pricing purposes.

bomItemPriceSecondary

bomItemPriceSecondary: BigNumber

Price. Amount for non-stock item, which is used when costing the end or intermediate product for pricing purposes.

bomItemPriceUnitPrimary

bomItemPriceUnitPrimary: string

Currency Key. Currency key for amounts in the system. Maximum length: 5.

bomItemPriceUnitSecondary

bomItemPriceUnitSecondary: string

Currency Key. Currency key for amounts in the system. Maximum length: 5.

bomItemQuantityPrimary

bomItemQuantityPrimary: BigNumber

Component quantity. Quantity of the component, which is entered in relation to the base quantity of the product. You usually enter the quantity without a +/- sign (for example, 66). For the following materials, you enter the quantity with a - sign (for example, 22-): Materials that are marked as co-products Intra materials (in process industries) In display functions, the system calculates the current component quantity from the required quantity and the base quantity. Required quantity Current component quantity = ------------------ * Saved component quantity Base quantity.

bomItemQuantitySecondary

bomItemQuantitySecondary: BigNumber

Component quantity. Quantity of the component, which is entered in relation to the base quantity of the product. You usually enter the quantity without a +/- sign (for example, 66). For the following materials, you enter the quantity with a - sign (for example, 22-): Materials that are marked as co-products Intra materials (in process industries) In display functions, the system calculates the current component quantity from the required quantity and the base quantity. Required quantity Current component quantity = ------------------ * Saved component quantity Base quantity.

bomItemUnitPrimary

bomItemUnitPrimary: string

Component unit of measure. The unit for the component quantity. The system determines the unit as follows: Material items with a material master record - base unit of measure from the material master record. Class items - unit defined in the additional data of the class. Additional units for material items with a material master record: For material items, you can maintain alternative units of measure to the base unit of measure in the material master. In bills of material, not all alternative units of measure are taken into account - only the unit of issue. Possible values are: base unit of measure unit of issue units of measure that have the same dimension as either the base unit of measure or the unit of issue If you enter no unit, the system proposes a unit from the material master if the item has a material master: If the unit of issue was entered on the storage detail screen, the system copies this unit. Otherwise, it copies the base unit of measure. Maximum length: 3.

bomItemUnitSecondary

bomItemUnitSecondary: string

Component unit of measure. The unit for the component quantity. The system determines the unit as follows: Material items with a material master record - base unit of measure from the material master record. Class items - unit defined in the additional data of the class. Additional units for material items with a material master record: For material items, you can maintain alternative units of measure to the base unit of measure in the material master. In bills of material, not all alternative units of measure are taken into account - only the unit of issue. Possible values are: base unit of measure unit of issue units of measure that have the same dimension as either the base unit of measure or the unit of issue If you enter no unit, the system proposes a unit from the material master if the item has a material master: If the unit of issue was entered on the storage detail screen, the system copies this unit. Otherwise, it copies the base unit of measure. Maximum length: 3.

completeMaintStatusPrimary

completeMaintStatusPrimary: string

Maintenance status of complete material. Maximum length: 15.

completeMaintStatusSecondary

completeMaintStatusSecondary: string

Maintenance status of complete material. Maximum length: 15.

delivDurationInDaysPrimary

delivDurationInDaysPrimary: BigNumber

Delivery time in days. Gives the delivery time for the material in days. When an order-specific BOM is exploded, a purchase requisition is produced via an MRP program.

delivDurationInDaysSecondary

delivDurationInDaysSecondary: BigNumber

Delivery time in days. Gives the delivery time for the material in days. When an order-specific BOM is exploded, a purchase requisition is produced via an MRP program.

formulaKeyPrimary

formulaKeyPrimary: string

Formula key. Key that represents the algorithm for calculating the variable-size item quantity. You want to calculate the volume of a rolled sheet of metal. This has a variable length and height, but a constant width (500 MM). The following are used in the calculation: SI units that are defined in Customizing Length: M (meters) Volume: M3 (cubic meters) In the variable-size item, you only enter the variable values (size 1 and size 2) with a unit of measure that can be derived from the SI unit of the dimension. Example for dimension Length: MM (milllimeters), CM (centimeters), DM (decimeters), and M (meters) The variable-size item formula uses the SI unit, so you must enter the constant width in the formula in the SI unit (meters). Example: ROMS1 * ROMS2 * 0.5 (M) You can enter units of measure for calculating the variable-size item quantity with a formula. The quantity is always calculated in the SI unit of the dimension, such as M3 (cubic meters) for volume. Maximum length: 2.

formulaKeySecondary

formulaKeySecondary: string

Formula key. Key that represents the algorithm for calculating the variable-size item quantity. You want to calculate the volume of a rolled sheet of metal. This has a variable length and height, but a constant width (500 MM). The following are used in the calculation: SI units that are defined in Customizing Length: M (meters) Volume: M3 (cubic meters) In the variable-size item, you only enter the variable values (size 1 and size 2) with a unit of measure that can be derived from the SI unit of the dimension. Example for dimension Length: MM (milllimeters), CM (centimeters), DM (decimeters), and M (meters) The variable-size item formula uses the SI unit, so you must enter the constant width in the formula in the SI unit (meters). Example: ROMS1 * ROMS2 * 0.5 (M) You can enter units of measure for calculating the variable-size item quantity with a formula. The quantity is always calculated in the SI unit of the dimension, such as M3 (cubic meters) for volume. Maximum length: 2.

goodsReceiptDurationPrimary

goodsReceiptDurationPrimary: BigNumber

Goods Receipt Processing Time in Days. Number of workdays required after receiving the material for inspection and placement into storage.

goodsReceiptDurationSecondary

goodsReceiptDurationSecondary: BigNumber

Goods Receipt Processing Time in Days. Number of workdays required after receiving the material for inspection and placement into storage.

isCadPrimary

isCadPrimary: boolean

CAD Indicator. Information: data for the assembly/component was generated in a CAD system and transferred into the SAP system via an interface.

isCadSecondary

isCadSecondary: boolean

CAD Indicator. Information: data for the assembly/component was generated in a CAD system and transferred into the SAP system via an interface.

isHeaderDeletePrimary

isHeaderDeletePrimary: boolean

Deletion Indicator. Indicator showing that the BOM header or the BOM item has been deleted with reference to the change number. This indicator is relevant to changes that have been made with reference to a change number with a validity that has been specified using a new validity type.

isHeaderDeleteSecondary

isHeaderDeleteSecondary: boolean

Deletion Indicator. Indicator showing that the BOM header or the BOM item has been deleted with reference to the change number. This indicator is relevant to changes that have been made with reference to a change number with a validity that has been specified using a new validity type.

isMaterialProvisionPrimary

isMaterialProvisionPrimary: string

Material Provision Indicator. This key indicates that the item is subject to material provision. In the BOM explosion, you can use this indicator to restrict the items selected. There are two types of material provision: Material provided by a vendor Material provided by a customer You can also use the material provision indicator to identify the subcontracting type for a part. The following indicators are available: Refurbishment material to SC (value S in standard SAP system) Refurbishment material from SC (value X in standard SAP system) Subsequent delivery (value F in standard SAP system) If you do not enter information in this field, the components are provided to the subcontractor as consumable materials (initial value in the standard SAP system). Material provided by a vendor This indicator controls material requirements planning. Maintain this indicator for BOM components only if the material master record of the header material supports subcontracting (Special procurement field). The special procurement key for subcontracting means that all components of the BOM are provided free of charge to a subcontractor for further processing. The items are copied to a subcontract order. If the item is provided to a vendor, do not enter any material provision indicator. Dependent requirements are generated for this item. If the item is already at a vendor's premises and is not provided by us, do enter an indicator. No dependent requirements are generated for this item. Material provided by a customer This indicator is not currently active. Maximum length: 1.

isMaterialProvisionSecondary

isMaterialProvisionSecondary: string

Material Provision Indicator. This key indicates that the item is subject to material provision. In the BOM explosion, you can use this indicator to restrict the items selected. There are two types of material provision: Material provided by a vendor Material provided by a customer You can also use the material provision indicator to identify the subcontracting type for a part. The following indicators are available: Refurbishment material to SC (value S in standard SAP system) Refurbishment material from SC (value X in standard SAP system) Subsequent delivery (value F in standard SAP system) If you do not enter information in this field, the components are provided to the subcontractor as consumable materials (initial value in the standard SAP system). Material provided by a vendor This indicator controls material requirements planning. Maintain this indicator for BOM components only if the material master record of the header material supports subcontracting (Special procurement field). The special procurement key for subcontracting means that all components of the BOM are provided free of charge to a subcontractor for further processing. The items are copied to a subcontract order. If the item is provided to a vendor, do not enter any material provision indicator. Dependent requirements are generated for this item. If the item is already at a vendor's premises and is not provided by us, do enter an indicator. No dependent requirements are generated for this item. Material provided by a customer This indicator is not currently active. Maximum length: 1.

isProductionRelevantPrimary

isProductionRelevantPrimary: boolean

Indicator: item relevant to production. Indicates that the item is relevant to the production process. Items with this indicator are copied to the planned order, and the system calculates dependent requirements for them. When the planned order is converted to a production order, the system automatically copies these items to the production order. This item status indicator is used to control: Subsequent processing in related application areas Selection of items in the BOM explosion Whether you can set and remove this indicator, or whether the system makes an unchangeable setting, depends on the BOM usage you selected on the initial screen. You can find further information in Customizing for bills of material under General Data -> BOM Usage -> Define BOM usages.

isProductionRelevantSecond

isProductionRelevantSecond: boolean

Indicator: item relevant to production. Indicates that the item is relevant to the production process. Items with this indicator are copied to the planned order, and the system calculates dependent requirements for them. When the planned order is converted to a production order, the system automatically copies these items to the production order. This item status indicator is used to control: Subsequent processing in related application areas Selection of items in the BOM explosion Whether you can set and remove this indicator, or whether the system makes an unchangeable setting, depends on the BOM usage you selected on the initial screen. You can find further information in Customizing for bills of material under General Data -> BOM Usage -> Define BOM usages.

itemIsCostingRelevantPrimary

itemIsCostingRelevantPrimary: string

Indicator for relevancy to costing. This key controls whether and to what extent this item is relevant to costing. The extent is controlled by predefined factors for fixed and variable costs respectively. If this indicator is not set, the item is not costed. Indicator "x" determines that the item is always relevant to costing in all ways. This means that you do not need to maintain factors. You can enter factors if another indicator is entered. Factors between 0 and 1 are primarily used in inventory costing. These factors are not relevant to standard costing or order costing. Example: factor 0.5 in standard costing means that the item is costed with a factor of 1. Factor 0 means that the item is not costed. Maximum length: 1.

itemIsCostingRelevantSecondary

itemIsCostingRelevantSecondary: string

Indicator for relevancy to costing. This key controls whether and to what extent this item is relevant to costing. The extent is controlled by predefined factors for fixed and variable costs respectively. If this indicator is not set, the item is not costed. Indicator "x" determines that the item is always relevant to costing in all ways. This means that you do not need to maintain factors. You can enter factors if another indicator is entered. Factors between 0 and 1 are primarily used in inventory costing. These factors are not relevant to standard costing or order costing. Example: factor 0.5 in standard costing means that the item is costed with a factor of 1. Factor 0 means that the item is not costed. Maximum length: 1.

leadTimeOffsetPrimary

leadTimeOffsetPrimary: BigNumber

Lead-time offset. This value shows the lead-time offset (in workdays) for the component in relation to the start date for production of the superior assembly. This value is not included in lead-time scheduling for a task list. You can enter: A positive number of days The component is not required until after the start date. A negative number of days The component is required before the start date. Assembly AS-11 (start date 05/13/1998): Component Lead-time offset Finish date M-01 2+ 05/15/1998 M-02 2- 05/11/1998 M-03 0 05/13/1998 Component M-01 is not required until 2 days after the start date for the superior assembly. Component M-02 is required 2 days before the start date for the superior assembly, so the finish date for this component is 05/11/1998. The lead-time offset for component M-03 is 0, so the start date for the superior assembly is the same as the finish date for this component. Note: This information does not tell you the start date for the components, because the data required (such as in-house production time, processing time, or interoperation time) is not shown.

leadTimeOffsetSecondary

leadTimeOffsetSecondary: BigNumber

Lead-time offset. This value shows the lead-time offset (in workdays) for the component in relation to the start date for production of the superior assembly. This value is not included in lead-time scheduling for a task list. You can enter: A positive number of days The component is not required until after the start date. A negative number of days The component is required before the start date. Assembly AS-11 (start date 05/13/1998): Component Lead-time offset Finish date M-01 2+ 05/15/1998 M-02 2- 05/11/1998 M-03 0 05/13/1998 Component M-01 is not required until 2 days after the start date for the superior assembly. Component M-02 is required 2 days before the start date for the superior assembly, so the finish date for this component is 05/11/1998. The lead-time offset for component M-03 is 0, so the start date for the superior assembly is the same as the finish date for this component. Note: This information does not tell you the start date for the components, because the data required (such as in-house production time, processing time, or interoperation time) is not shown.

materialGroupPrimary

materialGroupPrimary: string

Material Group. Key that you use to group together several materials or services with the same attributes, and to assign them to a particular material group. You can use material groups to: Restrict the scope of analyses Search specifically for material master records via search helps. Maximum length: 9.

materialGroupSecondary

materialGroupSecondary: string

Material Group. Key that you use to group together several materials or services with the same attributes, and to assign them to a particular material group. You can use material groups to: Restrict the scope of analyses Search specifically for material master records via search helps. Maximum length: 9.

materialTypePrimary

materialTypePrimary: string

Material Type. Key that assigns the material to a group of materials such as raw materials, operating supplies or trading goods. The material type defines certain attributes of the material and has important control functions. Maximum length: 4.

materialTypeSecondary

materialTypeSecondary: string

Material Type. Key that assigns the material to a group of materials such as raw materials, operating supplies or trading goods. The material type defines certain attributes of the material and has important control functions. Maximum length: 4.

matlIsConfigurablePrimary

matlIsConfigurablePrimary: boolean

Configurable Material. Indicator that determines whether the material is configurable. If this indicator is set, you can assign a variant class to the material, making it possible to use it as a configurable material. You can set the indicator manually in the material master record, irrespective of the material type.

matlIsConfigurableSecondary

matlIsConfigurableSecondary: boolean

Configurable Material. Indicator that determines whether the material is configurable. If this indicator is set, you can assign a variant class to the material, making it possible to use it as a configurable material. You can set the indicator manually in the material master record, irrespective of the material type.

nmbrOfVarblSizeItemPrimary

nmbrOfVarblSizeItemPrimary: BigNumber

Number of variable-size items. Number of variable-size items required for the assembly .

nmbrOfVarblSizeItemSecondary

nmbrOfVarblSizeItemSecondary: BigNumber

Number of variable-size items. Number of variable-size items required for the assembly .

purchasingGroupSecondary

purchasingGroupSecondary: string

Purchasing Group. Key for a buyer or a group of buyers, who is/are responsible for certain purchasing activities. Internally, the purchasing group is responsible for the procurement of a material or a class of materials. Externally, it is the medium through which contacts with the vendor are maintained. Maximum length: 3.

purchasingGrouppPimary

purchasingGrouppPimary: string

Purchasing Group. Key for a buyer or a group of buyers, who is/are responsible for certain purchasing activities. Internally, the purchasing group is responsible for the procurement of a material or a class of materials. Externally, it is the medium through which contacts with the vendor are maintained. Maximum length: 3.

qtyVariableSizeItemPrimary

qtyVariableSizeItemPrimary: BigNumber

Quantity of variable-size item. Quantity of variable-size item, which the system calculates from the sizes entered. If you wish you can enter a variable-size item formula for the. calculation. The quantity of the variable-size item shown is per piece (PC) If you change a field that affects the calculation of the variable-size item quantity (for example, size or formula), the system only recalculates the quantity if you delete the existing quantity first. To do this, delete the contents of the Qty Var-sz item field. Size 1: 200 Size 2: 300 Size unit of measure: MM Variable size item unit: SQM Calculation of variable-size item quantity: A = Size 1 * Size 2 A = 200 MM * 300 MM A = 0,06 SQM --> The variable-size item quantity for each piece is: 0.06 SQM The value calculated is required in MRP, in order to calculate the total quantity of the raw material requirement for the component. If 10 pieces are required for the component, the variable-size item quantity is: 10 * 0.06 SQM = 0.6 SQM.

qtyVariableSizeItemSecondary

qtyVariableSizeItemSecondary: BigNumber

Quantity of variable-size item. Quantity of variable-size item, which the system calculates from the sizes entered. If you wish you can enter a variable-size item formula for the. calculation. The quantity of the variable-size item shown is per piece (PC) If you change a field that affects the calculation of the variable-size item quantity (for example, size or formula), the system only recalculates the quantity if you delete the existing quantity first. To do this, delete the contents of the Qty Var-sz item field. Size 1: 200 Size 2: 300 Size unit of measure: MM Variable size item unit: SQM Calculation of variable-size item quantity: A = Size 1 * Size 2 A = 200 MM * 300 MM A = 0,06 SQM --> The variable-size item quantity for each piece is: 0.06 SQM The value calculated is required in MRP, in order to calculate the total quantity of the raw material requirement for the component. If 10 pieces are required for the component, the variable-size item quantity is: 10 * 0.06 SQM = 0.6 SQM.

size1Primary

size1Primary: BigNumber

Size 1. One dimension of the variable-size item, used as a variable in the variable-size item formula. Variable-size item data for a sheet of metal: Size Description Entry 1 Length 200 2 Width 300 No. of variable-size items: 10 Size unit: MM Stockkeeping unit for sheet metal in material master: SQM Calculation of variable-size item quantity: A = Size 1 * Size 2 A = 200 MM * 300 MM A = 60.000 SQMM --> Quantity of variable-size item per sheet: 0.06 SQM 10 sheets are entered in the component, so the variable-size item requirement is: 10 * 0.06 SQM = 0.6 SQM.

size1Secondary

size1Secondary: BigNumber

Size 1. One dimension of the variable-size item, used as a variable in the variable-size item formula. Variable-size item data for a sheet of metal: Size Description Entry 1 Length 200 2 Width 300 No. of variable-size items: 10 Size unit: MM Stockkeeping unit for sheet metal in material master: SQM Calculation of variable-size item quantity: A = Size 1 * Size 2 A = 200 MM * 300 MM A = 60.000 SQMM --> Quantity of variable-size item per sheet: 0.06 SQM 10 sheets are entered in the component, so the variable-size item requirement is: 10 * 0.06 SQM = 0.6 SQM.

size2Primary

size2Primary: BigNumber

Size 2. One dimension of the variable-size item, used as a variable in the variable-size item formula. Variable-size item data for a sheet of metal: Size Description Entry 1 Length 200 2 Width 300 No. of variable-size items: 10 Size unit: MM Stockkeeping unit for sheet metal in material master: SQM Calculation of variable-size item quantity: A = Size 1 * Size 2 A = 200 MM * 300 MM A = 60.000 SQMM --> Quantity of variable-size item per sheet: 0.06 SQM 10 sheets are entered in the component, so the variable-size item requirement is: 10 * 0.06 SQM = 0.6 SQM.

size2Secondary

size2Secondary: BigNumber

Size 2. One dimension of the variable-size item, used as a variable in the variable-size item formula. Variable-size item data for a sheet of metal: Size Description Entry 1 Length 200 2 Width 300 No. of variable-size items: 10 Size unit: MM Stockkeeping unit for sheet metal in material master: SQM Calculation of variable-size item quantity: A = Size 1 * Size 2 A = 200 MM * 300 MM A = 60.000 SQMM --> Quantity of variable-size item per sheet: 0.06 SQM 10 sheets are entered in the component, so the variable-size item requirement is: 10 * 0.06 SQM = 0.6 SQM.

size3Primary

size3Primary: BigNumber

Size 3. One dimension of the variable-size item, used as a variable in the variable-size item formula. Variable-size item data for a sheet of metal: Size Description Entry 1 Length 200 2 Width 300 No. of variable-size items: 10 Size unit: MM Stockkeeping unit for sheet metal in material master: SQM Calculation of variable-size item quantity: A = Size 1 * Size 2 A = 200 MM * 300 MM A = 60.000 SQMM --> Quantity of variable-size item per sheet: 0.06 SQM 10 sheets are entered in the component, so the variable-size item requirement is: 10 * 0.06 SQM = 0.6 SQM.

size3Secondary

size3Secondary: BigNumber

Size 3. One dimension of the variable-size item, used as a variable in the variable-size item formula. Variable-size item data for a sheet of metal: Size Description Entry 1 Length 200 2 Width 300 No. of variable-size items: 10 Size unit: MM Stockkeeping unit for sheet metal in material master: SQM Calculation of variable-size item quantity: A = Size 1 * Size 2 A = 200 MM * 300 MM A = 60.000 SQMM --> Quantity of variable-size item per sheet: 0.06 SQM 10 sheets are entered in the component, so the variable-size item requirement is: 10 * 0.06 SQM = 0.6 SQM.

spclProcurementTypePrimary

spclProcurementTypePrimary: string

Special procurement type for BOM item. Allows you to define the procurement type more closely. The procurement type is determined from the material type. Enter the special procurement type to which you want to restrict the selection. If you procure a material externally, you may want to choose the special procurement type Consignment. If you produce a material in-house, it may be appropriate to choose Production in other plant. Maximum length: 2.

spclProcurementTypeSecondary

spclProcurementTypeSecondary: string

Special procurement type for BOM item. Allows you to define the procurement type more closely. The procurement type is determined from the material type. Enter the special procurement type to which you want to restrict the selection. If you procure a material externally, you may want to choose the special procurement type Consignment. If you produce a material in-house, it may be appropriate to choose Production in other plant. Maximum length: 2.

supplierPrimary

supplierPrimary: string

Account Number of Supplier. Specifies an alphanumeric key that uniquely identifies the supplier in the SAP system. Maximum length: 10.

supplierSecondary

supplierSecondary: string

Account Number of Supplier. Specifies an alphanumeric key that uniquely identifies the supplier in the SAP system. Maximum length: 10.

Static BOM_COMPARISON_RESULT

BOM_COMPARISON_RESULT: StringField<ComparisonResultSet> = new StringField('BOMComparisonResult', ComparisonResultSet, 'Edm.String')

Static representation of the bomComparisonResult property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static BOM_COMPARISON_UUID

BOM_COMPARISON_UUID: BinaryField<ComparisonResultSet> = new BinaryField('BOMComparisonUUID', ComparisonResultSet, 'Edm.Binary')

Static representation of the bomComparisonUuid property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static BOM_COMPONENT_PRIMARY

BOM_COMPONENT_PRIMARY: StringField<ComparisonResultSet> = new StringField('BOMComponentPrimary', ComparisonResultSet, 'Edm.String')

Static representation of the bomComponentPrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static BOM_COMPONENT_SECONDARY

BOM_COMPONENT_SECONDARY: StringField<ComparisonResultSet> = new StringField('BOMComponentSecondary', ComparisonResultSet, 'Edm.String')

Static representation of the bomComponentSecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static BOM_HEADER_BASE_UNIT_PRIMARY

BOM_HEADER_BASE_UNIT_PRIMARY: StringField<ComparisonResultSet> = new StringField('BOMHeaderBaseUnitPrimary', ComparisonResultSet, 'Edm.String')

Static representation of the bomHeaderBaseUnitPrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static BOM_HEADER_BASE_UNIT_SECONDARY

BOM_HEADER_BASE_UNIT_SECONDARY: StringField<ComparisonResultSet> = new StringField('BOMHeaderBaseUnitSecondary', ComparisonResultSet, 'Edm.String')

Static representation of the bomHeaderBaseUnitSecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static BOM_ITEM_CATEGORY_PRIMARY

BOM_ITEM_CATEGORY_PRIMARY: StringField<ComparisonResultSet> = new StringField('BOMItemCategoryPrimary', ComparisonResultSet, 'Edm.String')

Static representation of the bomItemCategoryPrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static BOM_ITEM_CATEGORY_SECONDARY

BOM_ITEM_CATEGORY_SECONDARY: StringField<ComparisonResultSet> = new StringField('BOMItemCategorySecondary', ComparisonResultSet, 'Edm.String')

Static representation of the bomItemCategorySecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static BOM_ITEM_DESCRIPTION_PRIMARY

BOM_ITEM_DESCRIPTION_PRIMARY: StringField<ComparisonResultSet> = new StringField('BOMItemDescriptionPrimary', ComparisonResultSet, 'Edm.String')

Static representation of the bomItemDescriptionPrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static BOM_ITEM_DESCRIPTION_SECONDARY

BOM_ITEM_DESCRIPTION_SECONDARY: StringField<ComparisonResultSet> = new StringField('BOMItemDescriptionSecondary', ComparisonResultSet, 'Edm.String')

Static representation of the bomItemDescriptionSecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static BOM_ITEM_PRICE_PRIMARY

BOM_ITEM_PRICE_PRIMARY: BigNumberField<ComparisonResultSet> = new BigNumberField('BOMItemPricePrimary', ComparisonResultSet, 'Edm.Decimal')

Static representation of the bomItemPricePrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static BOM_ITEM_PRICE_SECONDARY

BOM_ITEM_PRICE_SECONDARY: BigNumberField<ComparisonResultSet> = new BigNumberField('BOMItemPriceSecondary', ComparisonResultSet, 'Edm.Decimal')

Static representation of the bomItemPriceSecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static BOM_ITEM_PRICE_UNIT_PRIMARY

BOM_ITEM_PRICE_UNIT_PRIMARY: StringField<ComparisonResultSet> = new StringField('BOMItemPriceUnitPrimary', ComparisonResultSet, 'Edm.String')

Static representation of the bomItemPriceUnitPrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static BOM_ITEM_PRICE_UNIT_SECONDARY

BOM_ITEM_PRICE_UNIT_SECONDARY: StringField<ComparisonResultSet> = new StringField('BomItemPriceUnitSecondary', ComparisonResultSet, 'Edm.String')

Static representation of the bomItemPriceUnitSecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static BOM_ITEM_QUANTITY_PRIMARY

BOM_ITEM_QUANTITY_PRIMARY: BigNumberField<ComparisonResultSet> = new BigNumberField('BOMItemQuantityPrimary', ComparisonResultSet, 'Edm.Decimal')

Static representation of the bomItemQuantityPrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static BOM_ITEM_QUANTITY_SECONDARY

BOM_ITEM_QUANTITY_SECONDARY: BigNumberField<ComparisonResultSet> = new BigNumberField('BOMItemQuantitySecondary', ComparisonResultSet, 'Edm.Decimal')

Static representation of the bomItemQuantitySecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static BOM_ITEM_UNIT_PRIMARY

BOM_ITEM_UNIT_PRIMARY: StringField<ComparisonResultSet> = new StringField('BOMItemUnitPrimary', ComparisonResultSet, 'Edm.String')

Static representation of the bomItemUnitPrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static BOM_ITEM_UNIT_SECONDARY

BOM_ITEM_UNIT_SECONDARY: StringField<ComparisonResultSet> = new StringField('BOMItemUnitSecondary', ComparisonResultSet, 'Edm.String')

Static representation of the bomItemUnitSecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static COMPLETE_MAINT_STATUS_PRIMARY

COMPLETE_MAINT_STATUS_PRIMARY: StringField<ComparisonResultSet> = new StringField('CompleteMaintStatusPrimary', ComparisonResultSet, 'Edm.String')

Static representation of the completeMaintStatusPrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static COMPLETE_MAINT_STATUS_SECONDARY

COMPLETE_MAINT_STATUS_SECONDARY: StringField<ComparisonResultSet> = new StringField('CompleteMaintStatusSecondary', ComparisonResultSet, 'Edm.String')

Static representation of the completeMaintStatusSecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static DELIV_DURATION_IN_DAYS_PRIMARY

DELIV_DURATION_IN_DAYS_PRIMARY: BigNumberField<ComparisonResultSet> = new BigNumberField('DelivDurationInDaysPrimary', ComparisonResultSet, 'Edm.Decimal')

Static representation of the delivDurationInDaysPrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static DELIV_DURATION_IN_DAYS_SECONDARY

DELIV_DURATION_IN_DAYS_SECONDARY: BigNumberField<ComparisonResultSet> = new BigNumberField('DelivDurationInDaysSecondary', ComparisonResultSet, 'Edm.Decimal')

Static representation of the delivDurationInDaysSecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static FORMULA_KEY_PRIMARY

FORMULA_KEY_PRIMARY: StringField<ComparisonResultSet> = new StringField('FormulaKeyPrimary', ComparisonResultSet, 'Edm.String')

Static representation of the formulaKeyPrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static FORMULA_KEY_SECONDARY

FORMULA_KEY_SECONDARY: StringField<ComparisonResultSet> = new StringField('FormulaKeySecondary', ComparisonResultSet, 'Edm.String')

Static representation of the formulaKeySecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static GOODS_RECEIPT_DURATION_PRIMARY

GOODS_RECEIPT_DURATION_PRIMARY: BigNumberField<ComparisonResultSet> = new BigNumberField('GoodsReceiptDurationPrimary', ComparisonResultSet, 'Edm.Decimal')

Static representation of the goodsReceiptDurationPrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static GOODS_RECEIPT_DURATION_SECONDARY

GOODS_RECEIPT_DURATION_SECONDARY: BigNumberField<ComparisonResultSet> = new BigNumberField('GoodsReceiptDurationSecondary', ComparisonResultSet, 'Edm.Decimal')

Static representation of the goodsReceiptDurationSecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static IS_CAD_PRIMARY

IS_CAD_PRIMARY: BooleanField<ComparisonResultSet> = new BooleanField('IsCADPrimary', ComparisonResultSet, 'Edm.Boolean')

Static representation of the isCadPrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static IS_CAD_SECONDARY

IS_CAD_SECONDARY: BooleanField<ComparisonResultSet> = new BooleanField('IsCADSecondary', ComparisonResultSet, 'Edm.Boolean')

Static representation of the isCadSecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static IS_HEADER_DELETE_PRIMARY

IS_HEADER_DELETE_PRIMARY: BooleanField<ComparisonResultSet> = new BooleanField('IsHeaderDeletePrimary', ComparisonResultSet, 'Edm.Boolean')

Static representation of the isHeaderDeletePrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static IS_HEADER_DELETE_SECONDARY

IS_HEADER_DELETE_SECONDARY: BooleanField<ComparisonResultSet> = new BooleanField('IsHeaderDeleteSecondary', ComparisonResultSet, 'Edm.Boolean')

Static representation of the isHeaderDeleteSecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static IS_MATERIAL_PROVISION_PRIMARY

IS_MATERIAL_PROVISION_PRIMARY: StringField<ComparisonResultSet> = new StringField('IsMaterialProvisionPrimary', ComparisonResultSet, 'Edm.String')

Static representation of the isMaterialProvisionPrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static IS_MATERIAL_PROVISION_SECONDARY

IS_MATERIAL_PROVISION_SECONDARY: StringField<ComparisonResultSet> = new StringField('IsMaterialProvisionSecondary', ComparisonResultSet, 'Edm.String')

Static representation of the isMaterialProvisionSecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static IS_PRODUCTION_RELEVANT_PRIMARY

IS_PRODUCTION_RELEVANT_PRIMARY: BooleanField<ComparisonResultSet> = new BooleanField('IsProductionRelevantPrimary', ComparisonResultSet, 'Edm.Boolean')

Static representation of the isProductionRelevantPrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static IS_PRODUCTION_RELEVANT_SECOND

IS_PRODUCTION_RELEVANT_SECOND: BooleanField<ComparisonResultSet> = new BooleanField('IsProductionRelevantSecond', ComparisonResultSet, 'Edm.Boolean')

Static representation of the isProductionRelevantSecond property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static ITEM_IS_COSTING_RELEVANT_PRIMARY

ITEM_IS_COSTING_RELEVANT_PRIMARY: StringField<ComparisonResultSet> = new StringField('ItemIsCostingRelevantPrimary', ComparisonResultSet, 'Edm.String')

Static representation of the itemIsCostingRelevantPrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static ITEM_IS_COSTING_RELEVANT_SECONDARY

ITEM_IS_COSTING_RELEVANT_SECONDARY: StringField<ComparisonResultSet> = new StringField('ItemIsCostingRelevantSecondary', ComparisonResultSet, 'Edm.String')

Static representation of the itemIsCostingRelevantSecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static LEAD_TIME_OFFSET_PRIMARY

LEAD_TIME_OFFSET_PRIMARY: BigNumberField<ComparisonResultSet> = new BigNumberField('LeadTimeOffsetPrimary', ComparisonResultSet, 'Edm.Decimal')

Static representation of the leadTimeOffsetPrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static LEAD_TIME_OFFSET_SECONDARY

LEAD_TIME_OFFSET_SECONDARY: BigNumberField<ComparisonResultSet> = new BigNumberField('LeadTimeOffsetSecondary', ComparisonResultSet, 'Edm.Decimal')

Static representation of the leadTimeOffsetSecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static MATERIAL_GROUP_PRIMARY

MATERIAL_GROUP_PRIMARY: StringField<ComparisonResultSet> = new StringField('MaterialGroupPrimary', ComparisonResultSet, 'Edm.String')

Static representation of the materialGroupPrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static MATERIAL_GROUP_SECONDARY

MATERIAL_GROUP_SECONDARY: StringField<ComparisonResultSet> = new StringField('MaterialGroupSecondary', ComparisonResultSet, 'Edm.String')

Static representation of the materialGroupSecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static MATERIAL_TYPE_PRIMARY

MATERIAL_TYPE_PRIMARY: StringField<ComparisonResultSet> = new StringField('MaterialTypePrimary', ComparisonResultSet, 'Edm.String')

Static representation of the materialTypePrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static MATERIAL_TYPE_SECONDARY

MATERIAL_TYPE_SECONDARY: StringField<ComparisonResultSet> = new StringField('MaterialTypeSecondary', ComparisonResultSet, 'Edm.String')

Static representation of the materialTypeSecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static MATL_IS_CONFIGURABLE_PRIMARY

MATL_IS_CONFIGURABLE_PRIMARY: BooleanField<ComparisonResultSet> = new BooleanField('MatlIsConfigurablePrimary', ComparisonResultSet, 'Edm.Boolean')

Static representation of the matlIsConfigurablePrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static MATL_IS_CONFIGURABLE_SECONDARY

MATL_IS_CONFIGURABLE_SECONDARY: BooleanField<ComparisonResultSet> = new BooleanField('MatlIsConfigurableSecondary', ComparisonResultSet, 'Edm.Boolean')

Static representation of the matlIsConfigurableSecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static NMBR_OF_VARBL_SIZE_ITEM_PRIMARY

NMBR_OF_VARBL_SIZE_ITEM_PRIMARY: BigNumberField<ComparisonResultSet> = new BigNumberField('NmbrOfVarblSizeItemPrimary', ComparisonResultSet, 'Edm.Decimal')

Static representation of the nmbrOfVarblSizeItemPrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static NMBR_OF_VARBL_SIZE_ITEM_SECONDARY

NMBR_OF_VARBL_SIZE_ITEM_SECONDARY: BigNumberField<ComparisonResultSet> = new BigNumberField('NmbrOfVarblSizeItemSecondary', ComparisonResultSet, 'Edm.Decimal')

Static representation of the nmbrOfVarblSizeItemSecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static PURCHASING_GROUPP_PIMARY

PURCHASING_GROUPP_PIMARY: StringField<ComparisonResultSet> = new StringField('PurchasingGrouppPimary', ComparisonResultSet, 'Edm.String')

Static representation of the purchasingGrouppPimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static PURCHASING_GROUP_SECONDARY

PURCHASING_GROUP_SECONDARY: StringField<ComparisonResultSet> = new StringField('PurchasingGroupSecondary', ComparisonResultSet, 'Edm.String')

Static representation of the purchasingGroupSecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static QTY_VARIABLE_SIZE_ITEM_PRIMARY

QTY_VARIABLE_SIZE_ITEM_PRIMARY: BigNumberField<ComparisonResultSet> = new BigNumberField('QtyVariableSizeItemPrimary', ComparisonResultSet, 'Edm.Decimal')

Static representation of the qtyVariableSizeItemPrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static QTY_VARIABLE_SIZE_ITEM_SECONDARY

QTY_VARIABLE_SIZE_ITEM_SECONDARY: BigNumberField<ComparisonResultSet> = new BigNumberField('QtyVariableSizeItemSecondary', ComparisonResultSet, 'Edm.Decimal')

Static representation of the qtyVariableSizeItemSecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static SIZE_1_PRIMARY

SIZE_1_PRIMARY: BigNumberField<ComparisonResultSet> = new BigNumberField('Size1Primary', ComparisonResultSet, 'Edm.Decimal')

Static representation of the size1Primary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static SIZE_1_SECONDARY

SIZE_1_SECONDARY: BigNumberField<ComparisonResultSet> = new BigNumberField('Size1Secondary', ComparisonResultSet, 'Edm.Decimal')

Static representation of the size1Secondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static SIZE_2_PRIMARY

SIZE_2_PRIMARY: BigNumberField<ComparisonResultSet> = new BigNumberField('Size2Primary', ComparisonResultSet, 'Edm.Decimal')

Static representation of the size2Primary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static SIZE_2_SECONDARY

SIZE_2_SECONDARY: BigNumberField<ComparisonResultSet> = new BigNumberField('Size2Secondary', ComparisonResultSet, 'Edm.Decimal')

Static representation of the size2Secondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static SIZE_3_PRIMARY

SIZE_3_PRIMARY: BigNumberField<ComparisonResultSet> = new BigNumberField('Size3Primary', ComparisonResultSet, 'Edm.Decimal')

Static representation of the size3Primary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static SIZE_3_SECONDARY

SIZE_3_SECONDARY: BigNumberField<ComparisonResultSet> = new BigNumberField('Size3Secondary', ComparisonResultSet, 'Edm.Decimal')

Static representation of the size3Secondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static SPCL_PROCUREMENT_TYPE_PRIMARY

SPCL_PROCUREMENT_TYPE_PRIMARY: StringField<ComparisonResultSet> = new StringField('SpclProcurementTypePrimary', ComparisonResultSet, 'Edm.String')

Static representation of the spclProcurementTypePrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static SPCL_PROCUREMENT_TYPE_SECONDARY

SPCL_PROCUREMENT_TYPE_SECONDARY: StringField<ComparisonResultSet> = new StringField('SpclProcurementTypeSecondary', ComparisonResultSet, 'Edm.String')

Static representation of the spclProcurementTypeSecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static SUPPLIER_PRIMARY

SUPPLIER_PRIMARY: StringField<ComparisonResultSet> = new StringField('SupplierPrimary', ComparisonResultSet, 'Edm.String')

Static representation of the supplierPrimary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static SUPPLIER_SECONDARY

SUPPLIER_SECONDARY: StringField<ComparisonResultSet> = new StringField('SupplierSecondary', ComparisonResultSet, 'Edm.String')

Static representation of the supplierSecondary property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.

Static _allFields

_allFields: any[] = [ComparisonResultSet.BOM_COMPARISON_UUID,ComparisonResultSet.BOM_COMPONENT_PRIMARY,ComparisonResultSet.BOM_COMPONENT_SECONDARY,ComparisonResultSet.BOM_COMPARISON_RESULT,ComparisonResultSet.MATERIAL_TYPE_PRIMARY,ComparisonResultSet.MATERIAL_TYPE_SECONDARY,ComparisonResultSet.BOM_ITEM_QUANTITY_PRIMARY,ComparisonResultSet.BOM_ITEM_QUANTITY_SECONDARY,ComparisonResultSet.BOM_ITEM_CATEGORY_PRIMARY,ComparisonResultSet.BOM_ITEM_CATEGORY_SECONDARY,ComparisonResultSet.COMPLETE_MAINT_STATUS_PRIMARY,ComparisonResultSet.COMPLETE_MAINT_STATUS_SECONDARY,ComparisonResultSet.BOM_ITEM_DESCRIPTION_PRIMARY,ComparisonResultSet.BOM_ITEM_DESCRIPTION_SECONDARY,ComparisonResultSet.BOM_HEADER_BASE_UNIT_PRIMARY,ComparisonResultSet.BOM_HEADER_BASE_UNIT_SECONDARY,ComparisonResultSet.BOM_ITEM_UNIT_PRIMARY,ComparisonResultSet.BOM_ITEM_UNIT_SECONDARY,ComparisonResultSet.IS_PRODUCTION_RELEVANT_PRIMARY,ComparisonResultSet.IS_PRODUCTION_RELEVANT_SECOND,ComparisonResultSet.ITEM_IS_COSTING_RELEVANT_PRIMARY,ComparisonResultSet.ITEM_IS_COSTING_RELEVANT_SECONDARY,ComparisonResultSet.IS_HEADER_DELETE_PRIMARY,ComparisonResultSet.IS_HEADER_DELETE_SECONDARY,ComparisonResultSet.SPCL_PROCUREMENT_TYPE_PRIMARY,ComparisonResultSet.MATL_IS_CONFIGURABLE_PRIMARY,ComparisonResultSet.IS_MATERIAL_PROVISION_PRIMARY,ComparisonResultSet.IS_CAD_PRIMARY,ComparisonResultSet.LEAD_TIME_OFFSET_PRIMARY,ComparisonResultSet.PURCHASING_GROUPP_PIMARY,ComparisonResultSet.DELIV_DURATION_IN_DAYS_PRIMARY,ComparisonResultSet.SUPPLIER_PRIMARY,ComparisonResultSet.BOM_ITEM_PRICE_PRIMARY,ComparisonResultSet.BOM_ITEM_PRICE_UNIT_PRIMARY,ComparisonResultSet.NMBR_OF_VARBL_SIZE_ITEM_PRIMARY,ComparisonResultSet.SIZE_1_PRIMARY,ComparisonResultSet.SIZE_2_PRIMARY,ComparisonResultSet.SIZE_3_PRIMARY,ComparisonResultSet.QTY_VARIABLE_SIZE_ITEM_PRIMARY,ComparisonResultSet.FORMULA_KEY_PRIMARY,ComparisonResultSet.GOODS_RECEIPT_DURATION_PRIMARY,ComparisonResultSet.MATERIAL_GROUP_PRIMARY,ComparisonResultSet.SPCL_PROCUREMENT_TYPE_SECONDARY,ComparisonResultSet.MATL_IS_CONFIGURABLE_SECONDARY,ComparisonResultSet.IS_MATERIAL_PROVISION_SECONDARY,ComparisonResultSet.IS_CAD_SECONDARY,ComparisonResultSet.LEAD_TIME_OFFSET_SECONDARY,ComparisonResultSet.PURCHASING_GROUP_SECONDARY,ComparisonResultSet.DELIV_DURATION_IN_DAYS_SECONDARY,ComparisonResultSet.SUPPLIER_SECONDARY,ComparisonResultSet.BOM_ITEM_PRICE_SECONDARY,ComparisonResultSet.BOM_ITEM_PRICE_UNIT_SECONDARY,ComparisonResultSet.NMBR_OF_VARBL_SIZE_ITEM_SECONDARY,ComparisonResultSet.SIZE_1_SECONDARY,ComparisonResultSet.SIZE_2_SECONDARY,ComparisonResultSet.SIZE_3_SECONDARY,ComparisonResultSet.QTY_VARIABLE_SIZE_ITEM_SECONDARY,ComparisonResultSet.FORMULA_KEY_SECONDARY,ComparisonResultSet.GOODS_RECEIPT_DURATION_SECONDARY,ComparisonResultSet.MATERIAL_GROUP_SECONDARY]

All fields of the ComparisonResultSet entity.

Static _defaultServicePath

_defaultServicePath: string = "/sap/opu/odata/sap/API_BILLOFMATERIAL_COMPARISON_SRV"

Default url path for the according service.

Static _entityName

_entityName: string = "ComparisonResultSet"

Technical entity name for ComparisonResultSet.

Static _keyFields

_keyFields: Array<Selectable<ComparisonResultSet>> = [ComparisonResultSet.BOM_COMPARISON_UUID]

All key fields of the ComparisonResultSet entity.

Static _keys

_keys: any = ComparisonResultSet._keyFields.reduce((acc: any, field) => {acc[field.fieldName] = field;return acc;}, {})

Mapping of all key field names to the respective static field property ComparisonResultSet.

Static _serviceName

_serviceName: string = "API_BILLOFMATERIAL_COMPARISON_SRV"

Technical service name for ComparisonResultSet.

Methods

Static builder

Static requestBuilder

  • Returns a request builder to construct requests for operations on the ComparisonResultSet entity type.

    Returns ComparisonResultSetRequestBuilder

    A ComparisonResultSet request builder.