public class InspectionResultValue extends VdmEntity<InspectionResultValue>
Original entity name from the Odata EDM: A_InspectionResultValueType
Modifier and Type | Class and Description |
---|---|
static class |
InspectionResultValue.InspectionResultValueBuilder |
Modifier and Type | Field and Description |
---|---|
static InspectionResultValueSelectable |
ALL_FIELDS
Selector for all available fields of InspectionResultValue.
|
static InspectionResultValueField<ZonedDateTime> |
CHANGED_DATE_TIME
Use with available fluent helpers to apply the ChangedDateTime field to query operations.
|
static InspectionResultValueField<LocalTime> |
CHANGED_TIME
Use with available fluent helpers to apply the ChangedTime field to query operations.
|
static InspectionResultValueField<String> |
CHARACTERISTIC_ATTRIBUTE_CATALOG
Use with available fluent helpers to apply the CharacteristicAttributeCatalog field to query operations.
|
static InspectionResultValueField<String> |
CHARACTERISTIC_ATTRIBUTE_CODE
Use with available fluent helpers to apply the CharacteristicAttributeCode field to query operations.
|
static InspectionResultValueField<String> |
CHARACTERISTIC_ATTRIBUTE_CODE_GRP
Use with available fluent helpers to apply the CharacteristicAttributeCodeGrp field to query operations.
|
static InspectionResultValueField<String> |
CREATED_BY_USER
Use with available fluent helpers to apply the CreatedByUser field to query operations.
|
static InspectionResultValueField<LocalDateTime> |
CREATION_DATE
Use with available fluent helpers to apply the CreationDate field to query operations.
|
static InspectionResultValueField<LocalTime> |
CREATION_TIME
Use with available fluent helpers to apply the CreationTime field to query operations.
|
static InspectionResultValueField<String> |
DEFECT_CLASS
Use with available fluent helpers to apply the DefectClass field to query operations.
|
static InspectionResultValueField<String> |
INSP_LOT_SINGLE_UNIT_NUMBER
Use with available fluent helpers to apply the InspLotSingleUnitNumber field to query operations.
|
static InspectionResultValueField<String> |
INSP_PLAN_OPERATION_INTERNAL_ID
Use with available fluent helpers to apply the InspPlanOperationInternalID field to query operations.
|
static InspectionResultValueField<String> |
INSP_RESULT_FRMTD_MEASURED_VALUE
Use with available fluent helpers to apply the InspResultFrmtdMeasuredValue field to query operations.
|
static InspectionResultValueField<String> |
INSP_RESULT_HAS_MEASURED_VALUE
Use with available fluent helpers to apply the InspResultHasMeasuredValue field to query operations.
|
static InspectionResultValueField<String> |
INSP_RESULT_ITEM_INTERNAL_ID
Use with available fluent helpers to apply the InspResultItemInternalID field to query operations.
|
static InspectionResultValueField<String> |
INSP_RESULT_VALUE_INTERNAL_ID
Use with available fluent helpers to apply the InspResultValueInternalID field to query operations.
|
static InspectionResultValueField<String> |
INSP_RSLT_FREE_DEFINED_TEST_EQUIP
Use with available fluent helpers to apply the InspRsltFreeDefinedTestEquip field to query operations.
|
static InspectionResultValueField<String> |
INSPECTION_CHARACTERISTIC
Use with available fluent helpers to apply the InspectionCharacteristic field to query operations.
|
static InspectionResultValueField<LocalDateTime> |
INSPECTION_END_DATE
Use with available fluent helpers to apply the InspectionEndDate field to query operations.
|
static InspectionResultValueField<LocalTime> |
INSPECTION_END_TIME
Use with available fluent helpers to apply the InspectionEndTime field to query operations.
|
static InspectionResultValueField<String> |
INSPECTION_LOT
Use with available fluent helpers to apply the InspectionLot field to query operations.
|
static InspectionResultValueField<Short> |
INSPECTION_NUMBER_OF_DEFECTS
Use with available fluent helpers to apply the InspectionNumberOfDefects field to query operations.
|
static InspectionResultValueField<String> |
INSPECTION_RESULT_ATTRIBUTE
Use with available fluent helpers to apply the InspectionResultAttribute field to query operations.
|
static InspectionResultValueField<String> |
INSPECTION_RESULT_CATALOG2
Use with available fluent helpers to apply the InspectionResultCatalog2 field to query operations.
|
static InspectionResultValueField<String> |
INSPECTION_RESULT_CATALOG3
Use with available fluent helpers to apply the InspectionResultCatalog3 field to query operations.
|
static InspectionResultValueField<String> |
INSPECTION_RESULT_CATALOG4
Use with available fluent helpers to apply the InspectionResultCatalog4 field to query operations.
|
static InspectionResultValueField<String> |
INSPECTION_RESULT_CATALOG5
Use with available fluent helpers to apply the InspectionResultCatalog5 field to query operations.
|
static InspectionResultValueField<String> |
INSPECTION_RESULT_CODE_GROUP2
Use with available fluent helpers to apply the InspectionResultCodeGroup2 field to query operations.
|
static InspectionResultValueField<String> |
INSPECTION_RESULT_CODE_GROUP3
Use with available fluent helpers to apply the InspectionResultCodeGroup3 field to query operations.
|
static InspectionResultValueField<String> |
INSPECTION_RESULT_CODE_GROUP4
Use with available fluent helpers to apply the InspectionResultCodeGroup4 field to query operations.
|
static InspectionResultValueField<String> |
INSPECTION_RESULT_CODE_GROUP5
Use with available fluent helpers to apply the InspectionResultCodeGroup5 field to query operations.
|
static InspectionResultValueField<String> |
INSPECTION_RESULT_CODE2
Use with available fluent helpers to apply the InspectionResultCode2 field to query operations.
|
static InspectionResultValueField<String> |
INSPECTION_RESULT_CODE3
Use with available fluent helpers to apply the InspectionResultCode3 field to query operations.
|
static InspectionResultValueField<String> |
INSPECTION_RESULT_CODE4
Use with available fluent helpers to apply the InspectionResultCode4 field to query operations.
|
static InspectionResultValueField<String> |
INSPECTION_RESULT_CODE5
Use with available fluent helpers to apply the InspectionResultCode5 field to query operations.
|
static InspectionResultValueField<String> |
INSPECTION_RESULT_ITEM
Use with available fluent helpers to apply the InspectionResultItem field to query operations.
|
static InspectionResultValueField<Double> |
INSPECTION_RESULT_MEASURED_VALUE
Use with available fluent helpers to apply the InspectionResultMeasuredValue field to query operations.
|
static InspectionResultValueField<String> |
INSPECTION_RESULT_ORIGINAL_VALUE
Use with available fluent helpers to apply the InspectionResultOriginalValue field to query operations.
|
static InspectionResultValueField<String> |
INSPECTION_RESULT_TEXT
Use with available fluent helpers to apply the InspectionResultText field to query operations.
|
static InspectionResultValueField<LocalDateTime> |
INSPECTION_START_DATE
Use with available fluent helpers to apply the InspectionStartDate field to query operations.
|
static InspectionResultValueField<LocalTime> |
INSPECTION_START_TIME
Use with available fluent helpers to apply the InspectionStartTime field to query operations.
|
static InspectionResultValueField<String> |
INSPECTION_SUBSET_INTERNAL_ID
Use with available fluent helpers to apply the InspectionSubsetInternalID field to query operations.
|
static InspectionResultValueField<String> |
INSPECTION_VALUATION_RESULT
Use with available fluent helpers to apply the InspectionValuationResult field to query operations.
|
static InspectionResultValueField<String> |
INSPECTOR
Use with available fluent helpers to apply the Inspector field to query operations.
|
static InspectionResultValueField<LocalDateTime> |
LAST_CHANGE_DATE
Use with available fluent helpers to apply the LastChangeDate field to query operations.
|
static InspectionResultValueField<String> |
LAST_CHANGED_BY_USER
Use with available fluent helpers to apply the LastChangedByUser field to query operations.
|
changedOriginalFields
Constructor and Description |
---|
InspectionResultValue() |
InspectionResultValue(String inspectionLot,
String inspPlanOperationInternalID,
String inspectionCharacteristic,
String inspResultValueInternalID,
String inspectionResultAttribute,
String inspResultItemInternalID,
String inspectionSubsetInternalID,
Double inspectionResultMeasuredValue,
String inspResultFrmtdMeasuredValue,
String inspResultHasMeasuredValue,
String inspectionResultOriginalValue,
Short inspectionNumberOfDefects,
String defectClass,
String inspectionResultText,
String inspLotSingleUnitNumber,
String inspectionResultItem,
String inspRsltFreeDefinedTestEquip,
String inspectionValuationResult,
String characteristicAttributeCodeGrp,
String inspectionResultCodeGroup2,
String inspectionResultCodeGroup3,
String inspectionResultCodeGroup4,
String inspectionResultCodeGroup5,
String characteristicAttributeCode,
String inspectionResultCode2,
String inspectionResultCode3,
String inspectionResultCode4,
String inspectionResultCode5,
String characteristicAttributeCatalog,
String inspectionResultCatalog2,
String inspectionResultCatalog3,
String inspectionResultCatalog4,
String inspectionResultCatalog5,
String inspector,
LocalDateTime inspectionStartDate,
LocalTime inspectionStartTime,
LocalDateTime inspectionEndDate,
LocalTime inspectionEndTime,
LocalDateTime creationDate,
LocalTime creationTime,
String createdByUser,
LocalDateTime lastChangeDate,
LocalTime changedTime,
String lastChangedByUser,
ZonedDateTime changedDateTime) |
Modifier and Type | Method and Description |
---|---|
void |
attachToService(String servicePath,
HttpDestinationProperties destination)
Sets the service path and destination for the fetch commands of this entity.
|
static InspectionResultValue.InspectionResultValueBuilder |
builder() |
protected boolean |
canEqual(Object other) |
boolean |
equals(Object o) |
static <T> InspectionResultValueField<T> |
field(String fieldName,
Class<T> fieldType)
Use with available fluent helpers to apply an extension field to query operations.
|
static <T,DomainT> |
field(String fieldName,
TypeConverter<T,DomainT> typeConverter)
Use with available fluent helpers to apply an extension field to query operations.
|
protected void |
fromMap(Map<String,Object> inputValues) |
ZonedDateTime |
getChangedDateTime()
Constraints: Not nullable, Precision: 0
|
LocalTime |
getChangedTime()
Constraints: Not nullable, Precision: 0
|
String |
getCharacteristicAttributeCatalog()
Constraints: Not nullable, Maximum length: 1
|
String |
getCharacteristicAttributeCode()
Constraints: Not nullable, Maximum length: 4
|
String |
getCharacteristicAttributeCodeGrp()
Constraints: Not nullable, Maximum length: 8
|
String |
getCreatedByUser()
Constraints: Not nullable, Maximum length: 12
|
LocalDateTime |
getCreationDate()
Constraints: Not nullable, Precision: 0
|
LocalTime |
getCreationTime()
Constraints: Not nullable, Precision: 0
|
protected String |
getDefaultServicePath() |
String |
getDefectClass()
Constraints: Not nullable, Maximum length: 2
|
HttpDestinationProperties |
getDestinationForFetch()
Convienence field for reusing the same destination with multiple queries (e.g.
|
protected String |
getEntityCollection() |
String |
getInspectionCharacteristic()
(Key Field) Constraints: Not nullable, Maximum length: 4
|
LocalDateTime |
getInspectionEndDate()
Constraints: Not nullable, Precision: 0
|
LocalTime |
getInspectionEndTime()
Constraints: Not nullable, Precision: 0
|
String |
getInspectionLot()
(Key Field) Constraints: Not nullable, Maximum length: 12
|
Short |
getInspectionNumberOfDefects()
Constraints: none
|
String |
getInspectionResultAttribute()
Constraints: Not nullable, Maximum length: 1
|
String |
getInspectionResultCatalog2()
Constraints: Not nullable, Maximum length: 1
|
String |
getInspectionResultCatalog3()
Constraints: Not nullable, Maximum length: 1
|
String |
getInspectionResultCatalog4()
Constraints: Not nullable, Maximum length: 1
|
String |
getInspectionResultCatalog5()
Constraints: Not nullable, Maximum length: 1
|
String |
getInspectionResultCode2()
Constraints: Not nullable, Maximum length: 4
|
String |
getInspectionResultCode3()
Constraints: Not nullable, Maximum length: 4
|
String |
getInspectionResultCode4()
Constraints: Not nullable, Maximum length: 4
|
String |
getInspectionResultCode5()
Constraints: Not nullable, Maximum length: 4
|
String |
getInspectionResultCodeGroup2()
Constraints: Not nullable, Maximum length: 8
|
String |
getInspectionResultCodeGroup3()
Constraints: Not nullable, Maximum length: 8
|
String |
getInspectionResultCodeGroup4()
Constraints: Not nullable, Maximum length: 8
|
String |
getInspectionResultCodeGroup5()
Constraints: Not nullable, Maximum length: 8
|
String |
getInspectionResultItem()
Constraints: Not nullable, Maximum length: 18
|
Double |
getInspectionResultMeasuredValue()
Constraints: none
|
String |
getInspectionResultOriginalValue()
Constraints: Not nullable, Maximum length: 25
|
String |
getInspectionResultText()
Constraints: Not nullable, Maximum length: 40
|
LocalDateTime |
getInspectionStartDate()
Constraints: Not nullable, Precision: 0
|
LocalTime |
getInspectionStartTime()
Constraints: Not nullable, Precision: 0
|
String |
getInspectionSubsetInternalID()
Constraints: Not nullable, Maximum length: 6
|
String |
getInspectionValuationResult()
Constraints: Not nullable, Maximum length: 1
|
String |
getInspector()
Constraints: Not nullable, Maximum length: 12
|
String |
getInspLotSingleUnitNumber()
Constraints: Not nullable, Maximum length: 4
|
String |
getInspPlanOperationInternalID()
(Key Field) Constraints: Not nullable, Maximum length: 8
|
String |
getInspResultFrmtdMeasuredValue()
Constraints: Not nullable, Maximum length: 22
|
String |
getInspResultHasMeasuredValue()
Constraints: Not nullable, Maximum length: 1
|
String |
getInspResultItemInternalID()
Constraints: Not nullable, Maximum length: 4
|
String |
getInspResultValueInternalID()
(Key Field) Constraints: Not nullable, Maximum length: 8
|
String |
getInspRsltFreeDefinedTestEquip()
Constraints: Not nullable, Maximum length: 18
|
protected Map<String,Object> |
getKey() |
LocalDateTime |
getLastChangeDate()
Constraints: Not nullable, Precision: 0
|
String |
getLastChangedByUser()
Constraints: Not nullable, Maximum length: 12
|
Class<InspectionResultValue> |
getType() |
int |
hashCode() |
void |
setChangedDateTime(ZonedDateTime changedDateTime)
Constraints: Not nullable, Precision: 0
|
void |
setChangedTime(LocalTime changedTime)
Constraints: Not nullable, Precision: 0
|
void |
setCharacteristicAttributeCatalog(String characteristicAttributeCatalog)
Constraints: Not nullable, Maximum length: 1
|
void |
setCharacteristicAttributeCode(String characteristicAttributeCode)
Constraints: Not nullable, Maximum length: 4
|
void |
setCharacteristicAttributeCodeGrp(String characteristicAttributeCodeGrp)
Constraints: Not nullable, Maximum length: 8
|
void |
setCreatedByUser(String createdByUser)
Constraints: Not nullable, Maximum length: 12
|
void |
setCreationDate(LocalDateTime creationDate)
Constraints: Not nullable, Precision: 0
|
void |
setCreationTime(LocalTime creationTime)
Constraints: Not nullable, Precision: 0
|
void |
setDefectClass(String defectClass)
Constraints: Not nullable, Maximum length: 2
|
void |
setInspectionCharacteristic(String inspectionCharacteristic)
(Key Field) Constraints: Not nullable, Maximum length: 4
|
void |
setInspectionEndDate(LocalDateTime inspectionEndDate)
Constraints: Not nullable, Precision: 0
|
void |
setInspectionEndTime(LocalTime inspectionEndTime)
Constraints: Not nullable, Precision: 0
|
void |
setInspectionLot(String inspectionLot)
(Key Field) Constraints: Not nullable, Maximum length: 12
|
void |
setInspectionNumberOfDefects(Short inspectionNumberOfDefects)
Constraints: none
|
void |
setInspectionResultAttribute(String inspectionResultAttribute)
Constraints: Not nullable, Maximum length: 1
|
void |
setInspectionResultCatalog2(String inspectionResultCatalog2)
Constraints: Not nullable, Maximum length: 1
|
void |
setInspectionResultCatalog3(String inspectionResultCatalog3)
Constraints: Not nullable, Maximum length: 1
|
void |
setInspectionResultCatalog4(String inspectionResultCatalog4)
Constraints: Not nullable, Maximum length: 1
|
void |
setInspectionResultCatalog5(String inspectionResultCatalog5)
Constraints: Not nullable, Maximum length: 1
|
void |
setInspectionResultCode2(String inspectionResultCode2)
Constraints: Not nullable, Maximum length: 4
|
void |
setInspectionResultCode3(String inspectionResultCode3)
Constraints: Not nullable, Maximum length: 4
|
void |
setInspectionResultCode4(String inspectionResultCode4)
Constraints: Not nullable, Maximum length: 4
|
void |
setInspectionResultCode5(String inspectionResultCode5)
Constraints: Not nullable, Maximum length: 4
|
void |
setInspectionResultCodeGroup2(String inspectionResultCodeGroup2)
Constraints: Not nullable, Maximum length: 8
|
void |
setInspectionResultCodeGroup3(String inspectionResultCodeGroup3)
Constraints: Not nullable, Maximum length: 8
|
void |
setInspectionResultCodeGroup4(String inspectionResultCodeGroup4)
Constraints: Not nullable, Maximum length: 8
|
void |
setInspectionResultCodeGroup5(String inspectionResultCodeGroup5)
Constraints: Not nullable, Maximum length: 8
|
void |
setInspectionResultItem(String inspectionResultItem)
Constraints: Not nullable, Maximum length: 18
|
void |
setInspectionResultMeasuredValue(Double inspectionResultMeasuredValue)
Constraints: none
|
void |
setInspectionResultOriginalValue(String inspectionResultOriginalValue)
Constraints: Not nullable, Maximum length: 25
|
void |
setInspectionResultText(String inspectionResultText)
Constraints: Not nullable, Maximum length: 40
|
void |
setInspectionStartDate(LocalDateTime inspectionStartDate)
Constraints: Not nullable, Precision: 0
|
void |
setInspectionStartTime(LocalTime inspectionStartTime)
Constraints: Not nullable, Precision: 0
|
void |
setInspectionSubsetInternalID(String inspectionSubsetInternalID)
Constraints: Not nullable, Maximum length: 6
|
void |
setInspectionValuationResult(String inspectionValuationResult)
Constraints: Not nullable, Maximum length: 1
|
void |
setInspector(String inspector)
Constraints: Not nullable, Maximum length: 12
|
void |
setInspLotSingleUnitNumber(String inspLotSingleUnitNumber)
Constraints: Not nullable, Maximum length: 4
|
void |
setInspPlanOperationInternalID(String inspPlanOperationInternalID)
(Key Field) Constraints: Not nullable, Maximum length: 8
|
void |
setInspResultFrmtdMeasuredValue(String inspResultFrmtdMeasuredValue)
Constraints: Not nullable, Maximum length: 22
|
void |
setInspResultHasMeasuredValue(String inspResultHasMeasuredValue)
Constraints: Not nullable, Maximum length: 1
|
void |
setInspResultItemInternalID(String inspResultItemInternalID)
Constraints: Not nullable, Maximum length: 4
|
void |
setInspResultValueInternalID(String inspResultValueInternalID)
(Key Field) Constraints: Not nullable, Maximum length: 8
|
void |
setInspRsltFreeDefinedTestEquip(String inspRsltFreeDefinedTestEquip)
Constraints: Not nullable, Maximum length: 18
|
void |
setLastChangeDate(LocalDateTime lastChangeDate)
Constraints: Not nullable, Precision: 0
|
void |
setLastChangedByUser(String lastChangedByUser)
Constraints: Not nullable, Maximum length: 12
|
protected void |
setServicePathForFetch(String servicePathForFetch)
The service path only used for the fetch commands of this entity.
|
protected Map<String,Object> |
toMapOfFields() |
String |
toString() |
getServicePathForFetch, getVersionIdentifier, setDestinationForFetch, setVersionIdentifier
getChangedFields, getCustomField, getCustomField, getCustomFieldNames, getCustomFields, getSetOfCustomFields, getSetOfFields, getSetOfNavigationProperties, hasCustomField, hasCustomField, rememberChangedField, resetChangedFields, setCustomField, setCustomField, toMap, toMapOfCustomFields, toMapOfNavigationProperties
public static final InspectionResultValueSelectable ALL_FIELDS
public static final InspectionResultValueField<String> INSPECTION_LOT
public static final InspectionResultValueField<String> INSP_PLAN_OPERATION_INTERNAL_ID
public static final InspectionResultValueField<String> INSPECTION_CHARACTERISTIC
public static final InspectionResultValueField<String> INSP_RESULT_VALUE_INTERNAL_ID
public static final InspectionResultValueField<String> INSPECTION_RESULT_ATTRIBUTE
public static final InspectionResultValueField<String> INSP_RESULT_ITEM_INTERNAL_ID
public static final InspectionResultValueField<String> INSPECTION_SUBSET_INTERNAL_ID
public static final InspectionResultValueField<Double> INSPECTION_RESULT_MEASURED_VALUE
public static final InspectionResultValueField<String> INSP_RESULT_FRMTD_MEASURED_VALUE
public static final InspectionResultValueField<String> INSP_RESULT_HAS_MEASURED_VALUE
public static final InspectionResultValueField<String> INSPECTION_RESULT_ORIGINAL_VALUE
public static final InspectionResultValueField<Short> INSPECTION_NUMBER_OF_DEFECTS
public static final InspectionResultValueField<String> DEFECT_CLASS
public static final InspectionResultValueField<String> INSPECTION_RESULT_TEXT
public static final InspectionResultValueField<String> INSP_LOT_SINGLE_UNIT_NUMBER
public static final InspectionResultValueField<String> INSPECTION_RESULT_ITEM
public static final InspectionResultValueField<String> INSP_RSLT_FREE_DEFINED_TEST_EQUIP
public static final InspectionResultValueField<String> INSPECTION_VALUATION_RESULT
public static final InspectionResultValueField<String> CHARACTERISTIC_ATTRIBUTE_CODE_GRP
public static final InspectionResultValueField<String> INSPECTION_RESULT_CODE_GROUP2
public static final InspectionResultValueField<String> INSPECTION_RESULT_CODE_GROUP3
public static final InspectionResultValueField<String> INSPECTION_RESULT_CODE_GROUP4
public static final InspectionResultValueField<String> INSPECTION_RESULT_CODE_GROUP5
public static final InspectionResultValueField<String> CHARACTERISTIC_ATTRIBUTE_CODE
public static final InspectionResultValueField<String> INSPECTION_RESULT_CODE2
public static final InspectionResultValueField<String> INSPECTION_RESULT_CODE3
public static final InspectionResultValueField<String> INSPECTION_RESULT_CODE4
public static final InspectionResultValueField<String> INSPECTION_RESULT_CODE5
public static final InspectionResultValueField<String> CHARACTERISTIC_ATTRIBUTE_CATALOG
public static final InspectionResultValueField<String> INSPECTION_RESULT_CATALOG2
public static final InspectionResultValueField<String> INSPECTION_RESULT_CATALOG3
public static final InspectionResultValueField<String> INSPECTION_RESULT_CATALOG4
public static final InspectionResultValueField<String> INSPECTION_RESULT_CATALOG5
public static final InspectionResultValueField<String> INSPECTOR
public static final InspectionResultValueField<LocalDateTime> INSPECTION_START_DATE
public static final InspectionResultValueField<LocalTime> INSPECTION_START_TIME
public static final InspectionResultValueField<LocalDateTime> INSPECTION_END_DATE
public static final InspectionResultValueField<LocalTime> INSPECTION_END_TIME
public static final InspectionResultValueField<LocalDateTime> CREATION_DATE
public static final InspectionResultValueField<LocalTime> CREATION_TIME
public static final InspectionResultValueField<String> CREATED_BY_USER
public static final InspectionResultValueField<LocalDateTime> LAST_CHANGE_DATE
public static final InspectionResultValueField<LocalTime> CHANGED_TIME
public static final InspectionResultValueField<String> LAST_CHANGED_BY_USER
public static final InspectionResultValueField<ZonedDateTime> CHANGED_DATE_TIME
public InspectionResultValue()
public InspectionResultValue(@Nullable String inspectionLot, @Nullable String inspPlanOperationInternalID, @Nullable String inspectionCharacteristic, @Nullable String inspResultValueInternalID, @Nullable String inspectionResultAttribute, @Nullable String inspResultItemInternalID, @Nullable String inspectionSubsetInternalID, @Nullable Double inspectionResultMeasuredValue, @Nullable String inspResultFrmtdMeasuredValue, @Nullable String inspResultHasMeasuredValue, @Nullable String inspectionResultOriginalValue, @Nullable Short inspectionNumberOfDefects, @Nullable String defectClass, @Nullable String inspectionResultText, @Nullable String inspLotSingleUnitNumber, @Nullable String inspectionResultItem, @Nullable String inspRsltFreeDefinedTestEquip, @Nullable String inspectionValuationResult, @Nullable String characteristicAttributeCodeGrp, @Nullable String inspectionResultCodeGroup2, @Nullable String inspectionResultCodeGroup3, @Nullable String inspectionResultCodeGroup4, @Nullable String inspectionResultCodeGroup5, @Nullable String characteristicAttributeCode, @Nullable String inspectionResultCode2, @Nullable String inspectionResultCode3, @Nullable String inspectionResultCode4, @Nullable String inspectionResultCode5, @Nullable String characteristicAttributeCatalog, @Nullable String inspectionResultCatalog2, @Nullable String inspectionResultCatalog3, @Nullable String inspectionResultCatalog4, @Nullable String inspectionResultCatalog5, @Nullable String inspector, @Nullable LocalDateTime inspectionStartDate, @Nullable LocalTime inspectionStartTime, @Nullable LocalDateTime inspectionEndDate, @Nullable LocalTime inspectionEndTime, @Nullable LocalDateTime creationDate, @Nullable LocalTime creationTime, @Nullable String createdByUser, @Nullable LocalDateTime lastChangeDate, @Nullable LocalTime changedTime, @Nullable String lastChangedByUser, @Nullable ZonedDateTime changedDateTime)
@Nonnull public Class<InspectionResultValue> getType()
getType
in class VdmObject<InspectionResultValue>
public void setInspectionLot(@Nullable String inspectionLot)
Original property name from the Odata EDM: InspectionLot
The inspection lot number is assigned by the system.
inspectionLot
- Number that uniquely identifies an inspection lot.public void setInspPlanOperationInternalID(@Nullable String inspPlanOperationInternalID)
Original property name from the Odata EDM: InspPlanOperationInternalID
inspPlanOperationInternalID
- Current Node Number from Order Counterpublic void setInspectionCharacteristic(@Nullable String inspectionCharacteristic)
Original property name from the Odata EDM: InspectionCharacteristic
inspectionCharacteristic
- The number that explicitly identifies an inspection characteristic within an operation in an
inspection plan.public void setInspResultValueInternalID(@Nullable String inspResultValueInternalID)
Original property name from the Odata EDM: InspResultValueInternalID
inspResultValueInternalID
- Number of Individual Resultpublic void setInspectionResultAttribute(@Nullable String inspectionResultAttribute)
Original property name from the Odata EDM: InspectionResultAttribute
The system calculates statistics, such as the mean value, standard deviation and the number of fields only from valid single results.When you indicate that the result of a partial sample is invalid, the system reduces the summarized results data of the inspection characteristic by the results data of the invalid partial sample.
inspectionResultAttribute
- With an entry in this field you can indicate characteristic results or sample results as being invalid
or, for example, mark outliers. If single values are recorded, the attribute field refers to a single
value, otherwise this field refers to the results data for the characteristic or for the partial
sample.public void setInspResultItemInternalID(@Nullable String inspResultItemInternalID)
Original property name from the Odata EDM: InspResultItemInternalID
inspResultItemInternalID
- Number of a sample unit for the inspection characteristic or partial sample being inspected.public void setInspectionSubsetInternalID(@Nullable String inspectionSubsetInternalID)
Original property name from the Odata EDM: InspectionSubsetInternalID
inspectionSubsetInternalID
- Number identifying an inspection sample if dependent or independent multiple samples are used in the
sampling procedure of the characteristic or if inspection points are involved.public void setInspectionResultMeasuredValue(@Nullable Double inspectionResultMeasuredValue)
Original property name from the Odata EDM: InspectionResultMeasuredValue
After each entry the system determines the mean value for the inspection characteristic (or partial sample) on the basis of the confirmed and valid measured values.
inspectionResultMeasuredValue
- For each inspection characteristic you define in the inspection plan whether single values must be
recorded and measured values must be confirmed.public void setInspResultFrmtdMeasuredValue(@Nullable String inspResultFrmtdMeasuredValue)
Original property name from the Odata EDM: InspResultFrmtdMeasuredValue
inspResultFrmtdMeasuredValue
- Measured Value for a Sample Unit - formattedpublic void setInspResultHasMeasuredValue(@Nullable String inspResultHasMeasuredValue)
Original property name from the Odata EDM: InspResultHasMeasuredValue
inspResultHasMeasuredValue
- Measured Value Is Not Initialpublic void setInspectionResultOriginalValue(@Nullable String inspectionResultOriginalValue)
Original property name from the Odata EDM: InspectionResultOriginalValue
inspectionResultOriginalValue
- In this field, the system saves the original value that was actually entered during results recording.
Attributes that may have been entered are also saved (for example, the entry >3.14).public void setInspectionNumberOfDefects(@Nullable Short inspectionNumberOfDefects)
Original property name from the Odata EDM: InspectionNumberOfDefects
If the field is ready for input, you enter the number of defects. For each inspected sample unit you can confirm more than one defect.
inspectionNumberOfDefects
- Number of defects observed for a sample unit or characteristic/partial sample.public void setDefectClass(@Nullable String defectClass)
Original property name from the Odata EDM: DefectClass
Defects are usually assigned to one of three classes: critical defect, major defect, or minor defect.
defectClass
- Categorizes the possible defects into classes according to a defect valuation based on the results
caused by the defect.public void setInspectionResultText(@Nullable String inspectionResultText)
Original property name from the Odata EDM: InspectionResultText
inspectionResultText
- Inspection Description for Single Valuepublic void setInspLotSingleUnitNumber(@Nullable String inspLotSingleUnitNumber)
Original property name from the Odata EDM: InspLotSingleUnitNumber
inspLotSingleUnitNumber
- Number of Single Unit in Inspection Lotpublic void setInspectionResultItem(@Nullable String inspectionResultItem)
Original property name from the Odata EDM: InspectionResultItem
If the field is ready for input, enter an equipment number, a freely assigned identifier, or a serial number.
inspectionResultItem
- You use this field to assign external numbers to the units to be inspected. By doing so, you can
assign individual inspection results or defects to exactly one unit to be inspected.public void setInspRsltFreeDefinedTestEquip(@Nullable String inspRsltFreeDefinedTestEquip)
Original property name from the Odata EDM: InspRsltFreeDefinedTestEquip
The number of the machine used to produce the partThe test equipment used for the inspectionYou can use the input help to search for and select an equipment master record or a production resources and tools master record. You can, however, also make a free entry.NotesThe display function in the field is only active when an equipment master record or a production resources and tools master record has been entered.The field supports uppercase and lowercase letters.When making an entry, no check is performed to see if the SAP object exists.The check whether an SAP object exists can be performed, for example, in the enhancements for the valuation or completion of a characteristic.
inspRsltFreeDefinedTestEquip
- You can write general additional information in this field, for example:public void setInspectionValuationResult(@Nullable String inspectionValuationResult)
Original property name from the Odata EDM: InspectionValuationResult
For the valuation of the characteristic a distinction is made between the acceptance decision for the inspected units and the impact on similar future inspections (dynamic modification of samples).To display a list of all possible values for the valuation of the characteristic (or partial sample), select the list function. You valuate the characteristic (sample) using the 'Valuate' function.The sampling procedure that references a valuation mode defines how the valuation of an inspection characteristic (or partial sample) is to be carried out. The sampling procedure can be assigned to the inspection characteristics in the inspection plan.If you do not assign a sampling procedure to the inspection characteristic in the inspection plan, you have to valuate the inspection characteristic (or partial sample) manually.If the valuation of an inspection characteristic (or partial sample) is successful, the valuation is documented by means of a change to the record status. You can no longer enter data in the recording screen for the inspection characteristic (or partial sample) after the valuation.The valuation is unsuccessful if the predefined valuation procedure cannot reach a decision to accept or reject the characteristic (or partial sample).The most common reason for an unsuccessful valuation is that the inspection results needed for the valuation are either partially or completely missing.
inspectionValuationResult
- This field contains the valuation for the acceptance decision.public void setCharacteristicAttributeCodeGrp(@Nullable String characteristicAttributeCodeGrp)
Original property name from the Odata EDM: CharacteristicAttributeCodeGrp
characteristicAttributeCodeGrp
- Key for the code group.public void setInspectionResultCodeGroup2(@Nullable String inspectionResultCodeGroup2)
Original property name from the Odata EDM: InspectionResultCodeGroup2
inspectionResultCodeGroup2
- Key for the code group.public void setInspectionResultCodeGroup3(@Nullable String inspectionResultCodeGroup3)
Original property name from the Odata EDM: InspectionResultCodeGroup3
inspectionResultCodeGroup3
- Key for the code group.public void setInspectionResultCodeGroup4(@Nullable String inspectionResultCodeGroup4)
Original property name from the Odata EDM: InspectionResultCodeGroup4
inspectionResultCodeGroup4
- Key for the code group.public void setInspectionResultCodeGroup5(@Nullable String inspectionResultCodeGroup5)
Original property name from the Odata EDM: InspectionResultCodeGroup5
inspectionResultCodeGroup5
- Key for the code group.public void setCharacteristicAttributeCode(@Nullable String characteristicAttributeCode)
Original property name from the Odata EDM: CharacteristicAttributeCode
The code can be uniquely identified only with the catalog type and code group.
characteristicAttributeCode
- Represents the lowest level within the hierarchy of catalog type, code group and code. A code refers
to the actual coding for the attribute. For example, in a code group of colors, the code BL can
represent the color blue, GR can represent the color green, and so forth.public void setInspectionResultCode2(@Nullable String inspectionResultCode2)
Original property name from the Odata EDM: InspectionResultCode2
The code can be uniquely identified only with the catalog type and code group.
inspectionResultCode2
- Represents the lowest level within the hierarchy of catalog type, code group and code. A code refers
to the actual coding for the attribute. For example, in a code group of colors, the code BL can
represent the color blue, GR can represent the color green, and so forth.public void setInspectionResultCode3(@Nullable String inspectionResultCode3)
Original property name from the Odata EDM: InspectionResultCode3
The code can be uniquely identified only with the catalog type and code group.
inspectionResultCode3
- Represents the lowest level within the hierarchy of catalog type, code group and code. A code refers
to the actual coding for the attribute. For example, in a code group of colors, the code BL can
represent the color blue, GR can represent the color green, and so forth.public void setInspectionResultCode4(@Nullable String inspectionResultCode4)
Original property name from the Odata EDM: InspectionResultCode4
The code can be uniquely identified only with the catalog type and code group.
inspectionResultCode4
- Represents the lowest level within the hierarchy of catalog type, code group and code. A code refers
to the actual coding for the attribute. For example, in a code group of colors, the code BL can
represent the color blue, GR can represent the color green, and so forth.public void setInspectionResultCode5(@Nullable String inspectionResultCode5)
Original property name from the Odata EDM: InspectionResultCode5
The code can be uniquely identified only with the catalog type and code group.
inspectionResultCode5
- Represents the lowest level within the hierarchy of catalog type, code group and code. A code refers
to the actual coding for the attribute. For example, in a code group of colors, the code BL can
represent the color blue, GR can represent the color green, and so forth.public void setCharacteristicAttributeCatalog(@Nullable String characteristicAttributeCatalog)
Original property name from the Odata EDM: CharacteristicAttributeCatalog
The meaning of catalogs 0 through 9 and A through O is assigned by SAP. However you can freely define catalog types P through Z.
characteristicAttributeCatalog
- Main category by which code groups and codes are classified according to their contents (e.g.
characteristic attributes, defect types, usage decisions).public void setInspectionResultCatalog2(@Nullable String inspectionResultCatalog2)
Original property name from the Odata EDM: InspectionResultCatalog2
The meaning of catalogs 0 through 9 and A through O is assigned by SAP. However you can freely define catalog types P through Z.
inspectionResultCatalog2
- Main category by which code groups and codes are classified according to their contents (e.g.
characteristic attributes, defect types, usage decisions).public void setInspectionResultCatalog3(@Nullable String inspectionResultCatalog3)
Original property name from the Odata EDM: InspectionResultCatalog3
The meaning of catalogs 0 through 9 and A through O is assigned by SAP. However you can freely define catalog types P through Z.
inspectionResultCatalog3
- Main category by which code groups and codes are classified according to their contents (e.g.
characteristic attributes, defect types, usage decisions).public void setInspectionResultCatalog4(@Nullable String inspectionResultCatalog4)
Original property name from the Odata EDM: InspectionResultCatalog4
The meaning of catalogs 0 through 9 and A through O is assigned by SAP. However you can freely define catalog types P through Z.
inspectionResultCatalog4
- Main category by which code groups and codes are classified according to their contents (e.g.
characteristic attributes, defect types, usage decisions).public void setInspectionResultCatalog5(@Nullable String inspectionResultCatalog5)
Original property name from the Odata EDM: InspectionResultCatalog5
The meaning of catalogs 0 through 9 and A through O is assigned by SAP. However you can freely define catalog types P through Z.
inspectionResultCatalog5
- Main category by which code groups and codes are classified according to their contents (e.g.
characteristic attributes, defect types, usage decisions).public void setInspector(@Nullable String inspector)
Original property name from the Odata EDM: Inspector
The system does not check the entries made.
inspector
- The system enters the name of the user as the name of the inspector, if no other entry is made.public void setInspectionStartDate(@Nullable LocalDateTime inspectionStartDate)
Original property name from the Odata EDM: InspectionStartDate
inspectionStartDate
- The system enters the current date as the inspection start date, if no entry is made.public void setInspectionStartTime(@Nullable LocalTime inspectionStartTime)
Original property name from the Odata EDM: InspectionStartTime
inspectionStartTime
- The system enters the current time as the start time of the inspection, if no other entry is made.public void setInspectionEndDate(@Nullable LocalDateTime inspectionEndDate)
Original property name from the Odata EDM: InspectionEndDate
inspectionEndDate
- The system enters the current date as the ending date of the inspection of the characteristic. You can
change this entry.public void setInspectionEndTime(@Nullable LocalTime inspectionEndTime)
Original property name from the Odata EDM: InspectionEndTime
inspectionEndTime
- The system enters the current time as the ending time of the inspection. You can change this entry.public void setCreationDate(@Nullable LocalDateTime creationDate)
Original property name from the Odata EDM: CreationDate
The system enters the current system date.
creationDate
- Date on which the data record was created.public void setCreationTime(@Nullable LocalTime creationTime)
Original property name from the Odata EDM: CreationTime
creationTime
- Time at Which Data Record Was Createdpublic void setCreatedByUser(@Nullable String createdByUser)
Original property name from the Odata EDM: CreatedByUser
The system automatically enters the user name.
createdByUser
- Name of the user who created this data record.public void setLastChangeDate(@Nullable LocalDateTime lastChangeDate)
Original property name from the Odata EDM: LastChangeDate
The system enters the current system date.
lastChangeDate
- Date on which the data record was last changed.public void setChangedTime(@Nullable LocalTime changedTime)
Original property name from the Odata EDM: ChangedTime
changedTime
- Time at Which Data Record Was Changedpublic void setLastChangedByUser(@Nullable String lastChangedByUser)
Original property name from the Odata EDM: LastChangedByUser
lastChangedByUser
- Name of the user who made the last change to this data record.public void setChangedDateTime(@Nullable ZonedDateTime changedDateTime)
Original property name from the Odata EDM: ChangedDateTime
To standardize local times in a UTC time stamp and thus make them comparable with other times, these local times
need to be converted using your time zone and the ABAP command convert.Even if the system is able to determine
the time zone from Customizing or master data, you shoul save the time zone redundantly here.The internal
structure of the UTC time stamp is subdivided into a date part and a time part in packed number format
changedDateTime
- The UTC time stamp is the date and time relative to UTC (Universal Coordinated Time).protected String getEntityCollection()
getEntityCollection
in class VdmEntity<InspectionResultValue>
@Nonnull protected Map<String,Object> getKey()
getKey
in class VdmObject<InspectionResultValue>
@Nonnull protected Map<String,Object> toMapOfFields()
toMapOfFields
in class VdmObject<InspectionResultValue>
protected void fromMap(Map<String,Object> inputValues)
fromMap
in class VdmObject<InspectionResultValue>
@Nonnull public static <T> InspectionResultValueField<T> field(@Nonnull String fieldName, @Nonnull Class<T> fieldType)
T
- The type of the extension field when performing value comparisons.fieldName
- The name of the extension field as returned by the OData service.fieldType
- The Java type to use for the extension field when performing value comparisons.@Nonnull public static <T,DomainT> InspectionResultValueField<T> field(@Nonnull String fieldName, @Nonnull TypeConverter<T,DomainT> typeConverter)
T
- The type of the extension field when performing value comparisons.DomainT
- The type of the extension field as returned by the OData service.typeConverter
- A TypeConverterfieldName
- The name of the extension field as returned by the OData service.@Nullable public HttpDestinationProperties getDestinationForFetch()
VdmEntity
getDestinationForFetch
in class VdmEntity<InspectionResultValue>
protected void setServicePathForFetch(@Nullable String servicePathForFetch)
VdmEntity
Note: Use with caution, as this can easily break the fetch call on this entity. See the interface of the corresponding service for the default service path.
setServicePathForFetch
in class VdmEntity<InspectionResultValue>
public void attachToService(@Nullable String servicePath, @Nonnull HttpDestinationProperties destination)
VdmEntity
Note: Use with caution, as this can easily break the fetch calls on this entity. See the interface of the corresponding service for the default service path.
attachToService
in class VdmEntity<InspectionResultValue>
servicePath
- Optional parameter. New service path to apply to this entity and any associated entities that were
previously fetched. If a null value is provided and the service path has never been set, then the
service path will be set to the default defined in the corresponding service interface.destination
- New destination to apply to this entity and any associated entities that were previously fetched.protected String getDefaultServicePath()
getDefaultServicePath
in class VdmEntity<InspectionResultValue>
public static InspectionResultValue.InspectionResultValueBuilder builder()
@Nullable public String getInspectionLot()
Original property name from the Odata EDM: InspectionLot
The inspection lot number is assigned by the system.
@Nullable public String getInspPlanOperationInternalID()
Original property name from the Odata EDM: InspPlanOperationInternalID
@Nullable public String getInspectionCharacteristic()
Original property name from the Odata EDM: InspectionCharacteristic
@Nullable public String getInspResultValueInternalID()
Original property name from the Odata EDM: InspResultValueInternalID
@Nullable public String getInspectionResultAttribute()
Original property name from the Odata EDM: InspectionResultAttribute
The system calculates statistics, such as the mean value, standard deviation and the number of fields only from valid single results.When you indicate that the result of a partial sample is invalid, the system reduces the summarized results data of the inspection characteristic by the results data of the invalid partial sample.
@Nullable public String getInspResultItemInternalID()
Original property name from the Odata EDM: InspResultItemInternalID
@Nullable public String getInspectionSubsetInternalID()
Original property name from the Odata EDM: InspectionSubsetInternalID
@Nullable public Double getInspectionResultMeasuredValue()
Original property name from the Odata EDM: InspectionResultMeasuredValue
After each entry the system determines the mean value for the inspection characteristic (or partial sample) on the basis of the confirmed and valid measured values.
@Nullable public String getInspResultFrmtdMeasuredValue()
Original property name from the Odata EDM: InspResultFrmtdMeasuredValue
@Nullable public String getInspResultHasMeasuredValue()
Original property name from the Odata EDM: InspResultHasMeasuredValue
@Nullable public String getInspectionResultOriginalValue()
Original property name from the Odata EDM: InspectionResultOriginalValue
@Nullable public Short getInspectionNumberOfDefects()
Original property name from the Odata EDM: InspectionNumberOfDefects
If the field is ready for input, you enter the number of defects. For each inspected sample unit you can confirm more than one defect.
@Nullable public String getDefectClass()
Original property name from the Odata EDM: DefectClass
Defects are usually assigned to one of three classes: critical defect, major defect, or minor defect.
@Nullable public String getInspectionResultText()
Original property name from the Odata EDM: InspectionResultText
@Nullable public String getInspLotSingleUnitNumber()
Original property name from the Odata EDM: InspLotSingleUnitNumber
@Nullable public String getInspectionResultItem()
Original property name from the Odata EDM: InspectionResultItem
If the field is ready for input, enter an equipment number, a freely assigned identifier, or a serial number.
@Nullable public String getInspRsltFreeDefinedTestEquip()
Original property name from the Odata EDM: InspRsltFreeDefinedTestEquip
The number of the machine used to produce the partThe test equipment used for the inspectionYou can use the input help to search for and select an equipment master record or a production resources and tools master record. You can, however, also make a free entry.NotesThe display function in the field is only active when an equipment master record or a production resources and tools master record has been entered.The field supports uppercase and lowercase letters.When making an entry, no check is performed to see if the SAP object exists.The check whether an SAP object exists can be performed, for example, in the enhancements for the valuation or completion of a characteristic.
@Nullable public String getInspectionValuationResult()
Original property name from the Odata EDM: InspectionValuationResult
For the valuation of the characteristic a distinction is made between the acceptance decision for the inspected units and the impact on similar future inspections (dynamic modification of samples).To display a list of all possible values for the valuation of the characteristic (or partial sample), select the list function. You valuate the characteristic (sample) using the 'Valuate' function.The sampling procedure that references a valuation mode defines how the valuation of an inspection characteristic (or partial sample) is to be carried out. The sampling procedure can be assigned to the inspection characteristics in the inspection plan.If you do not assign a sampling procedure to the inspection characteristic in the inspection plan, you have to valuate the inspection characteristic (or partial sample) manually.If the valuation of an inspection characteristic (or partial sample) is successful, the valuation is documented by means of a change to the record status. You can no longer enter data in the recording screen for the inspection characteristic (or partial sample) after the valuation.The valuation is unsuccessful if the predefined valuation procedure cannot reach a decision to accept or reject the characteristic (or partial sample).The most common reason for an unsuccessful valuation is that the inspection results needed for the valuation are either partially or completely missing.
@Nullable public String getCharacteristicAttributeCodeGrp()
Original property name from the Odata EDM: CharacteristicAttributeCodeGrp
@Nullable public String getInspectionResultCodeGroup2()
Original property name from the Odata EDM: InspectionResultCodeGroup2
@Nullable public String getInspectionResultCodeGroup3()
Original property name from the Odata EDM: InspectionResultCodeGroup3
@Nullable public String getInspectionResultCodeGroup4()
Original property name from the Odata EDM: InspectionResultCodeGroup4
@Nullable public String getInspectionResultCodeGroup5()
Original property name from the Odata EDM: InspectionResultCodeGroup5
@Nullable public String getCharacteristicAttributeCode()
Original property name from the Odata EDM: CharacteristicAttributeCode
The code can be uniquely identified only with the catalog type and code group.
@Nullable public String getInspectionResultCode2()
Original property name from the Odata EDM: InspectionResultCode2
The code can be uniquely identified only with the catalog type and code group.
@Nullable public String getInspectionResultCode3()
Original property name from the Odata EDM: InspectionResultCode3
The code can be uniquely identified only with the catalog type and code group.
@Nullable public String getInspectionResultCode4()
Original property name from the Odata EDM: InspectionResultCode4
The code can be uniquely identified only with the catalog type and code group.
@Nullable public String getInspectionResultCode5()
Original property name from the Odata EDM: InspectionResultCode5
The code can be uniquely identified only with the catalog type and code group.
@Nullable public String getCharacteristicAttributeCatalog()
Original property name from the Odata EDM: CharacteristicAttributeCatalog
The meaning of catalogs 0 through 9 and A through O is assigned by SAP. However you can freely define catalog types P through Z.
@Nullable public String getInspectionResultCatalog2()
Original property name from the Odata EDM: InspectionResultCatalog2
The meaning of catalogs 0 through 9 and A through O is assigned by SAP. However you can freely define catalog types P through Z.
@Nullable public String getInspectionResultCatalog3()
Original property name from the Odata EDM: InspectionResultCatalog3
The meaning of catalogs 0 through 9 and A through O is assigned by SAP. However you can freely define catalog types P through Z.
@Nullable public String getInspectionResultCatalog4()
Original property name from the Odata EDM: InspectionResultCatalog4
The meaning of catalogs 0 through 9 and A through O is assigned by SAP. However you can freely define catalog types P through Z.
@Nullable public String getInspectionResultCatalog5()
Original property name from the Odata EDM: InspectionResultCatalog5
The meaning of catalogs 0 through 9 and A through O is assigned by SAP. However you can freely define catalog types P through Z.
@Nullable public String getInspector()
Original property name from the Odata EDM: Inspector
The system does not check the entries made.
@Nullable public LocalDateTime getInspectionStartDate()
Original property name from the Odata EDM: InspectionStartDate
@Nullable public LocalTime getInspectionStartTime()
Original property name from the Odata EDM: InspectionStartTime
@Nullable public LocalDateTime getInspectionEndDate()
Original property name from the Odata EDM: InspectionEndDate
@Nullable public LocalTime getInspectionEndTime()
Original property name from the Odata EDM: InspectionEndTime
@Nullable public LocalDateTime getCreationDate()
Original property name from the Odata EDM: CreationDate
The system enters the current system date.
@Nullable public LocalTime getCreationTime()
Original property name from the Odata EDM: CreationTime
@Nullable public String getCreatedByUser()
Original property name from the Odata EDM: CreatedByUser
The system automatically enters the user name.
@Nullable public LocalDateTime getLastChangeDate()
Original property name from the Odata EDM: LastChangeDate
The system enters the current system date.
@Nullable public LocalTime getChangedTime()
Original property name from the Odata EDM: ChangedTime
@Nullable public String getLastChangedByUser()
Original property name from the Odata EDM: LastChangedByUser
@Nullable public ZonedDateTime getChangedDateTime()
Original property name from the Odata EDM: ChangedDateTime
To standardize local times in a UTC time stamp and thus make them comparable with other times, these local times
need to be converted using your time zone and the ABAP command convert.Even if the system is able to determine
the time zone from Customizing or master data, you shoul save the time zone redundantly here.The internal
structure of the UTC time stamp is subdivided into a date part and a time part in packed number format
public String toString()
toString
in class VdmObject<InspectionResultValue>
public boolean equals(Object o)
equals
in class VdmObject<InspectionResultValue>
protected boolean canEqual(Object other)
canEqual
in class VdmObject<InspectionResultValue>
public int hashCode()
hashCode
in class VdmObject<InspectionResultValue>
Copyright © 2019 SAP SE. All rights reserved.