A mapper representing custom fields in an entity. Custom fields are represented by their field names and the corresponding values. A custom field can be added or updated using setCustomField method.
The current ETag version of the entity in the remote system. The ETag identified the version of the in the remote system. It will be automatically set in the "if-match" header of update requests and can be set as a custom header for delete requests. When no ETag is provided by the remote system the value of this variable defaults to "*".
Material number corresponding to manufacturer part number. Uniquely identifies an MPN material. Maximum length: 40.
Maximum Lot Size per Quota Item. Maximum PO quantity that may be allocated to a source of supply per order proposal in the planning run. If the shortage (undercoverage) quantity exceeds the maximum lot size, the quota system is re-applied to the remaining quantity.
Minimum Lot Size per Quota Item. Minimum order quantity that may be allocated to a source of supply per order proposal in the planning run. If the shortage (undercoverage) quantity is less than the minimum lot size, the latter quantity will be allocated to the source instead of the former.
Procurement Type. Indicates the type of procurement (that is, in-house manufacture, i.e. "making in", or external procurement, i.e. "buying out") for the quota arrangement item. Maximum length: 1.
Special procurement type. Indicator that determines the procurement type of the material and, consequently, how the material is procured. A material which is procured externally can be acquired viaa delivery schedule ora consignment order. Maximum length: 1.
Rounding Profile. Key that the system uses to adjust the order proposal quantity to deliverable units. In Customizing, enter a threshold value from which the system should round up to the next value per deliverable unit:If the requirements value exceeds the first threshold value, the system always rounds up to the next multiple of the level foundIf the requirements value falls below the first threshold value, the system copies the original requirements value.Two other types of rounding exist:Dynamic rounding profile:These profiles are used to round up quantities to logistical units of measure (for example, layers). The contents of a logistical unit of measure does not have to be know when creating the rounding profile. It is determined by the master data from the material master.Rounding profile with quantity to be added/subtractedWith these profiles, the given quantity is changed either by adding a percentage or subtracting a percentage.Only static rounding profiles are taken into account in requirements planning. Neither dynamic rounding profiles not quantity addition/ subtraction are taken into account.A material's base unit of measure is 1 unit; the purchase order is to be delivered in layers (1 layer corresponds to 5 units) or in pallets (1 pallet corresponds to 8 layers which contains 40 units).You maintain the profile as follows:From a requirements of 2 units, the system is to round up to 5; from a requirement of 32 units, the system is to round up to 40.This results in the following order proposal quantities:Requirement from 1 -> 1 requirement from 31 -> 30Requirement from 2 -> 5 requirement from 32 -> 40Requirement from 6 -> 10 requirement from 74 -> 80Requirement from 7 -> 10If no rounding profile has been entered, the system uses the rounding value entered in the material master record for the planning run. Maximum length: 4.
Maximum Release Quantity per Period. The "maximum release quantity" defines the maximum quantity that a source of supply can make available/supply within a specified timeframe. If a source with a maximum release quantity is next in line in a quota arrangement, in total no more than this maximum figure can be allocated to it within the specified period. If the lot in question exceeds this maximum, it will be split. The source in question will receive an order covering the difference between the quantity already released and the maximum release quantity. The balance of the lot will be allocated to the next source.The maximum release quantity is only taken into account in the planning run within MRP, not when purchase requisitions or planned orders are created manually.
Number of Periods to Which the Release Quantity Relates. In this field, you determine the number of periods for which the maximum release quantity is valid. Maximum length: 2.
Planned Delivery Time in Days. Number of calendar days needed to obtain the material or service if it is procured externally. If you have different vendors for a material, you must specify an average value. The same applies if you order the material from a fixed vendor that has varying delivery times.If you use the SAP Retail System, the planned delivery time can be suggested from the vendor sub-range in the vendor master record.
Production Version. Key which determines the various production techniques according to which a material can be manufactured. The production version determines the following:the BOM alternative for a BOM explosionthe task list type, the task list group and the task list group counter for allocation to task listslot-size restrictions for repetitive manufacturing. Maximum length: 4.
Quota. Number specifying which portion of a requirement is to be procured from a given source of supply. If a certain material is to be procured alternately from different suppliers, you can create aquota arrangement item for each supplier and assign a quota to each such item. The system then selects the effective source of supply at any given time by means of the following formula:quota rating = quota base quantity + quota-allocated quantity----------------------------------------------quotaThis quota rating is calculated for all sources of supply included in the quota arrangement. The source then selected is the one with the lowest rating.Which supplier or item of an outline purchase agreement is valid at a certain point in time is determined via the source list.Enter the portion of the material requirement that is to be procured from the source. The value is automatically converted into a percentage.If the quota is to be temporarily excluded from the quota arrangement, you can set the quota to '_'.The requirement of a material is to be evenly distributed among three suppliers. That is, the system is to allocate a third of the total requirement to each supplier.Enter 1 as quota for each supplier; the quota per supplier will then automatically be converted to 33%.
Allocated Quantity of Quota Arrangement Item. Total quantity procured to date from the quota arrangement item source. This value is updated in planned orders, purchase requisitions, purchase orders, and scheduling agreement delivery schedule lines.
Number of quota arrangement. Uniquely identifies the quota arrangement. Maximum length: 10.
Quota arrangement item. Uniquely identifies the quota arrangement item within a quota arrangement period. Maximum length: 3.
Quota Base Quantity of Quota Arrangement Item. Control quantity for a quota arrangement. Using the quota base quantity, you can regulate the quota arrangement without having to change the quota if, for example, a new source is to be included in the arrangement.You can set the quota base quantity manually or have it determined by the system.
Priority for Determination of Sequence. The priority determines the sequence in which the individual sources of supply are used. Items with priority are always taken into consideration first, before the items for which no priority has been entered. Example without splitting quota:If, for example, you enter priority one along with a maximum release quantity, then this source of supply is always selected until its maximum release quantity has been exhausted. Only then is the next source of supply selected.If no maximum release quantity was entered for the item with priority one, this item would always receive the complete requirement quantity.Example with splitting quota:In this procedure, the items are selected in the order of the quota. This sequence can be overridden using priorities.Please note that the splitting quantity is always based on the quota. Maximum length: 2.
Maximum Quantity of Quota Arrangement Item. A quota arrangement item is no longer suggested as the source if the quota-allocated quantity is equal to or exceeds the maximum quantity.
Period to Which the Release Quantity Relates. Maximum length: 1.
The remote state of the entity. Remote state refers to the last known state of the entity on the remote system from which it has been retrieved or to which it has been posted. It is stored as map, where the keys are stored in the format of VDM properties.
Indicator: "Once-Only". Specifies that a source may only be taken into account once in the apportionment of a lot. If a maximum lot size is specified for a source of supply, and if this source has a much lower quota rating than other sources, the following happens: the lot is split up into several order proposals (each of which amounts to the maximum lot size) which are all assigned to the the source in question.To avoid this, you can set the "once-only" indicator. This will cause the source to be taken into account once only for an amount equal to the maximum lot size. The remaining quantity will be assigned to the next source.
Vendor Account Number. Alphanumeric key uniquely identifying the document. With the supplier number, information from the supplier master record (such as the supplier's address and bank details) is copied into a purchasing document (such as a request for quotation or a purchase order).You can use the supplier number to keep track of requests for quotation, purchase orders and outline agreements. Maximum length: 10.
Plant from Which Material is Procured. Key for the factory or branch of a company (that is, a company code), from which the material is to be procured. You can only enter one supplier number or one plant per quota arrangement item.In the case of process orders, this field should remain empty if the quota arrangement is being used to select a production version. Maximum length: 4.
One-to-one navigation property to the PurchasingQuotaArrangement entity.
ETag version identifier accessor.
All fields selector.
Static representation of the manufacturerMaterial property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.
Static representation of the materialMaxLotSizeQuantity property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.
Static representation of the materialMinLotSizeQuantity property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.
Static representation of the materialProcurementCategory property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.
Static representation of the materialProcurementType property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.
Static representation of the materialRoundingProfile property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.
Static representation of the maximumReleaseQuantity property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.
Static representation of the numberOfPeriodsPerRelQuantity property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.
Static representation of the plannedDeliveryDurationInDays property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.
Static representation of the productionVersion property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.
Static representation of the purchasingSourceQuota property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.
Static representation of the quotaAllocatedQuantity property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.
Static representation of the quotaArrangement property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.
Static representation of the quotaArrangementItem property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.
Static representation of the quotaBaseQuantity property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.
Static representation of the quotaDeterminationPriority property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.
Static representation of the quotaMaximumQuantity property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.
Static representation of the quotaReleasePeriodType property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.
Static representation of the sourceOfSupplyIsAssignedOnce property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.
Static representation of the supplier property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.
Static representation of the supplyingPlant property for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.
Static representation of the one-to-one navigation property toPurchasingQuotaArrangement for query construction. Use to reference this property in query operations such as 'select' in the fluent request API.
All fields of the PurgQuotaArrangementItem entity.
Default url path for the according service.
Technical entity name for PurgQuotaArrangementItem.
All key fields of the PurgQuotaArrangementItem entity.
Mapping of all key field names to the respective static field property PurgQuotaArrangementItem.
Returns a map of all defined fields in entity to their current values.
Entity with all defined entity fields
Custom field value getter.
The name of the custom field
The value of the corresponding custom field
Returns a map that contains all entity custom fields.
A map of all defined custom fields in the entity
Returns all updated custom field properties compared to the last known remote state.
A map containing all updated custom properties, with their new values
Returns all changed properties compared to the last known remote state. The returned properties does not include custom fields. Use getUpdatedCustomFields, if updated custom fields are needed.
Entity with all properties that changed
Validates whether a custom field exists in the entity.
The name of the custom field to update
A boolean value, that indicates whether a custom field is defined in entity
Sets all retrieved custom fields in entity.
Extracted custom fields from a retrieved entity
A boolean value, that indicates the existence of the field in entity
Validates whether a field name does not conflict with an original field name and thus can be defined as custom fields.
Field name to check
Boolean value that describes whether a field name can be defined as custom field
Sets a new custom field in the entity or updates it. Throws an error, if the provided custom field name is already defined by an original field in entity.
The name of the custom field to update
The value of the field
The entity itself, to facilitate method chaining
Initializes or sets the remoteState of the entity. This function is called on all read, create and update requests. This function should be called after initializeCustomFields, if custom fields are defined.
State to be set as remote state
The entity itself, to facilitate method chaining
Set the ETag version identifier of the retrieved entity.
The returned ETag version of the entity
The entity itself, to facilitate method chaining
Overwrites the default toJSON method so that all instance variables as well as all custom fields of the entity are returned.
An object containing all instance variables + custom fields.
Returns an entity builder to construct instances PurgQuotaArrangementItem
.
A builder that constructs instances of entity type PurgQuotaArrangementItem
.
Returns a selectable object that allows the selection of custom field in a get request for the entity PurgQuotaArrangementItem
.
Name of the custom field to select
A builder that constructs instances of entity type PurgQuotaArrangementItem
.
Returns a request builder to construct requests for operations on the PurgQuotaArrangementItem
entity type.
A PurgQuotaArrangementItem
request builder.
This class represents the entity "A_PurgQuotaArrangementItem" of service "API_PUR_QUOTA_ARRANGEMENT_SRV". This service is part of the following communication scenarios: Purchasing Quota Arrangement Integration (SAP_COM_0166). See https://api.sap.com/api/API_PUR_QUOTA_ARRANGEMENT_SRV for more information.