public static class InspectionResult.InspectionResultBuilder extends Object
public InspectionResult.InspectionResultBuilder inspectionLot(@Nullable String inspectionLot)
Original property name from the Odata EDM: InspectionLot
The inspection lot number is assigned by the system.
public InspectionResult.InspectionResultBuilder inspPlanOperationInternalID(@Nullable String inspPlanOperationInternalID)
Original property name from the Odata EDM: InspPlanOperationInternalID
public InspectionResult.InspectionResultBuilder inspectionCharacteristic(@Nullable String inspectionCharacteristic)
Original property name from the Odata EDM: InspectionCharacteristic
plan.public InspectionResult.InspectionResultBuilder inspectionResultStatus(@Nullable String inspectionResultStatus)
Original property name from the Odata EDM: InspectionResultStatus
To display a list of all processing statuses that are possible for a characteristic or a sample, select the possible entries help.If you carry out one of the following functions, the processing status of the characteristic changes:enter data in the recording screen for the characteristic (sample):the processing status changes to 'processing'set for processing:the processing status changes to 'processing'valuate:the processing status changes to 'valuated'close:the processing status changes to 'closed'You can enter data or calculate statistics only while the inspection characteristic (or sample) status is set for processing.If you set a characteristic (sample) that has not yet been processed to 'processed', you have to close this characteristic (sample). You cannot reset the status of a processed characteristic (sample) back to 'not processed'.The usage decision for the inspection lot can only be made when the processing of all required characteristics is closed.
processing status documents the current processing state of the characteristic or the partial sample.public InspectionResult.InspectionResultBuilder inspectionResultAttribute(@Nullable String inspectionResultAttribute)
Original property name from the Odata EDM: InspectionResultAttribute
The system calculates statistics, such as the mean value, standard deviation and the number of fields only from valid single results.When you indicate that the result of a partial sample is invalid, the system reduces the summarized results data of the inspection characteristic by the results data of the invalid partial sample.
or, for example, mark outliers. If single values are recorded, the attribute field refers to a single value, otherwise this field refers to the results data for the characteristic or for the partial sample.public InspectionResult.InspectionResultBuilder inspectionResultOrigin(@Nullable String inspectionResultOrigin)
Original property name from the Odata EDM: InspectionResultOrigin
The keys for the origin of the results data are for information purposes only and have no controlling function.If a result is copied, for example from a certificate, this operation can be documented.
public InspectionResult.InspectionResultBuilder inspector(@Nullable String inspector)
Original property name from the Odata EDM: Inspector
The system does not check the entries made.
public InspectionResult.InspectionResultBuilder inspectionValuationResult(@Nullable String inspectionValuationResult)
Original property name from the Odata EDM: InspectionValuationResult
For the valuation of the characteristic a distinction is made between the acceptance decision for the inspected units and the impact on similar future inspections (dynamic modification of samples).To display a list of all possible values for the valuation of the characteristic (or partial sample), select the list function. You valuate the characteristic (sample) using the 'Valuate' function.The sampling procedure that references a valuation mode defines how the valuation of an inspection characteristic (or partial sample) is to be carried out. The sampling procedure can be assigned to the inspection characteristics in the inspection plan.If you do not assign a sampling procedure to the inspection characteristic in the inspection plan, you have to valuate the inspection characteristic (or partial sample) manually.If the valuation of an inspection characteristic (or partial sample) is successful, the valuation is documented by means of a change to the record status. You can no longer enter data in the recording screen for the inspection characteristic (or partial sample) after the valuation.The valuation is unsuccessful if the predefined valuation procedure cannot reach a decision to accept or reject the characteristic (or partial sample).The most common reason for an unsuccessful valuation is that the inspection results needed for the valuation are either partially or completely missing.
public InspectionResult.InspectionResultBuilder inspectionResultMeanValue(@Nullable Double inspectionResultMeanValue)
Original property name from the Odata EDM: InspectionResultMeanValue
If summarized results recording is defined for an inspection characteristic and the field is ready for input, enter the mean value of the valid measured values.For characteristics with single-value recording the system automatically determines the mean value after each entry.
characteristic:public InspectionResult.InspectionResultBuilder inspResultFrmtdMeanValue(@Nullable String inspResultFrmtdMeanValue)
Original property name from the Odata EDM: InspResultFrmtdMeanValue
public InspectionResult.InspectionResultBuilder inspectionResultHasMeanValue(@Nullable String inspectionResultHasMeanValue)
Original property name from the Odata EDM: InspectionResultHasMeanValue
If this indicator is set, then the value of the corresponding numeric field is not initial.
in order to differentiate between null and the initial value.public InspectionResult.InspectionResultBuilder inspectionResultMaximumValue(@Nullable Double inspectionResultMaximumValue)
Original property name from the Odata EDM: InspectionResultMaximumValue
If summarized results recording is defined for an inspection characteristic and the field is ready for input, enter the maximum value of the valid measured values.For characteristics with single-value recording the system automatically determines the maximum value of the valid measured values that were confirmed, if youselect the function for calculating statistical momentsvaluate the characteristic (partial sample)
characteristic:public InspectionResult.InspectionResultBuilder inspResultFrmtdMaximumValue(@Nullable String inspResultFrmtdMaximumValue)
Original property name from the Odata EDM: InspResultFrmtdMaximumValue
public InspectionResult.InspectionResultBuilder inspResultHasMaximumValue(@Nullable String inspResultHasMaximumValue)
Original property name from the Odata EDM: InspResultHasMaximumValue
If this indicator is set, then the value of the corresponding numeric field is not initial.
in order to differentiate between null and the initial value.public InspectionResult.InspectionResultBuilder inspectionResultMinimumValue(@Nullable Double inspectionResultMinimumValue)
Original property name from the Odata EDM: InspectionResultMinimumValue
If summarized results recording is defined for an inspection characteristic and the field is ready for input, enter the minimum value of the valid measured values.For characteristics with single-value recording the system automatically determines the minimum value of the valid measured values that were confirmed, if youselect the function for calculating statistical momentsvaluate the characteristic (partial sample)
characteristic:public InspectionResult.InspectionResultBuilder inspResultFrmtdMinimumValue(@Nullable String inspResultFrmtdMinimumValue)
Original property name from the Odata EDM: InspResultFrmtdMinimumValue
public InspectionResult.InspectionResultBuilder inspResultHasMinimumValue(@Nullable String inspResultHasMinimumValue)
Original property name from the Odata EDM: InspResultHasMinimumValue
If this indicator is set, then the value of the corresponding numeric field is not initial.
in order to differentiate between null and the initial value.public InspectionResult.InspectionResultBuilder inspectionResultOriginalValue(@Nullable String inspectionResultOriginalValue)
Original property name from the Odata EDM: InspectionResultOriginalValue
Attributes that may have been entered are also saved (for example, the entry >3.14).public InspectionResult.InspectionResultBuilder inspResultValidValuesNumber(@Nullable Integer inspResultValidValuesNumber)
Original property name from the Odata EDM: InspResultValidValuesNumber
If the field is ready for input, enter the inspected sample size.For each inspection plan characteristic you define the amount by which the inspected sample size in the 'Insp.ed' field can deviate from the to-be-inspected sample size in the 'Inspect' field. If a characteristic (partial sample ) is closed the system checks whether the required sample size is adhered to. The characteristic (partial sample) can only be closed if this is the case.For inspection characteristics, you can define conditions for adhering to the sample size. For example, you can define whether the inspection scope must be adhered to or whether it may be larger or smaller, etc.
public InspectionResult.InspectionResultBuilder inspectionResultText(@Nullable String inspectionResultText)
Original property name from the Odata EDM: InspectionResultText
public InspectionResult.InspectionResultBuilder inspectionResultHasLongText(@Nullable String inspectionResultHasLongText)
Original property name from the Odata EDM: InspectionResultHasLongText
public InspectionResult.InspectionResultBuilder characteristicAttributeCatalog(@Nullable String characteristicAttributeCatalog)
Original property name from the Odata EDM: CharacteristicAttributeCatalog
If you are processing a quantitative characteristic or a qualitative characteristic for which the characteristic attributes indicator is not set, you can assign up to 4 code groups or selected sets to describe the inspection characteristic or the inspection method.NOTEYou CANNOT assign selected sets from catalog type 1 to quantitative characteristics or to qualitative characteristics for which the characteristic attributes indicator is not set.
characteristic attributes, defect types, usage decisions).public InspectionResult.InspectionResultBuilder characteristicAttributeCodeGrp(@Nullable String characteristicAttributeCodeGrp)
Original property name from the Odata EDM: CharacteristicAttributeCodeGrp
public InspectionResult.InspectionResultBuilder characteristicAttributeCode(@Nullable String characteristicAttributeCode)
Original property name from the Odata EDM: CharacteristicAttributeCode
The code can be uniquely identified only with the catalog type and code group.
the actual coding for the attribute. For example, in a code group of colors, the code BL can represent the color blue, GR can represent the color green, and so forth.public InspectionResult.InspectionResultBuilder inspRsltFreeDefinedTestEquip(@Nullable String inspRsltFreeDefinedTestEquip)
Original property name from the Odata EDM: InspRsltFreeDefinedTestEquip
The number of the machine used to produce the partThe test equipment used for the inspectionYou can use the input help to search for and select an equipment master record or a production resources and tools master record. You can, however, also make a free entry.NotesThe display function in the field is only active when an equipment master record or a production resources and tools master record has been entered.The field supports uppercase and lowercase letters.When making an entry, no check is performed to see if the SAP object exists.The check whether an SAP object exists can be performed, for example, in the enhancements for the valuation or completion of a characteristic.
public InspectionResult.InspectionResultBuilder inspRsltBelowToleranceValsNmbr(@Nullable Integer inspRsltBelowToleranceValsNmbr)
Original property name from the Odata EDM: InspRsltBelowToleranceValsNmbr
The system determines the number of nonconforming single values for the inspection characteristic or the partial sample from the number of valid single values outside the tolerance range.If the field is ready for input and the characteristic has a lower tolerance limit, you enter the number of measured values below the tolerance range. This number must not be greater than the number of valid single values.In the inspection plan you can define whether the characteristic is quantitative or not and whether it has tolerance limits.
or the partial sample.public InspectionResult.InspectionResultBuilder inspRsltAboveToleranceValsNmbr(@Nullable Integer inspRsltAboveToleranceValsNmbr)
Original property name from the Odata EDM: InspRsltAboveToleranceValsNmbr
The system determines the number of nonconforming single values for the inspection characteristic or the partial sample from the number of valid single values outside the tolerance range.If the field is ready for input and the characteristic has an upper tolerance limit, you enter the number of measured values above the tolerance range. This number must not be greater than the number of valid single values.In the inspection plan you can define whether the characteristic is quantitative or not and whether it has tolerance limits.
or the partial sample.public InspectionResult.InspectionResultBuilder inspRsltNonconformingValsNmbr(@Nullable Integer inspRsltNonconformingValsNmbr)
Original property name from the Odata EDM: InspRsltNonconformingValsNmbr
If the field is ready for input, enter the number of nonconforming sample units.The number of nonconforming sample units cannot be greater than the number of inspected test units that can be confirmed as the number of valid measured values.
public InspectionResult.InspectionResultBuilder inspectionNumberOfDefects(@Nullable Integer inspectionNumberOfDefects)
Original property name from the Odata EDM: InspectionNumberOfDefects
The number of defects observed refers here to the sample unit, inspection characteristic or partial sample.If the field is ready for input, enter the number of defects. For each inspected sample unit, you can confirm more than one defect.
public InspectionResult.InspectionResultBuilder defectClass(@Nullable String defectClass)
Original property name from the Odata EDM: DefectClass
Defects are usually assigned to one of three classes: critical defect, major defect, or minor defect.
by the defect.public InspectionResult.InspectionResultBuilder inspRsltAboveToleranceFraction(@Nullable Double inspRsltAboveToleranceFraction)
Original property name from the Odata EDM: InspRsltAboveToleranceFraction
The share is displayed in per cent. For example, 0.112 stands for a share of 11.2 per cent.The share of units for the characteristic or sample that is above the tolerance range is calculated if youselect the function for calculating the sharevaluate the characteristic (or the sample)close the characteristic (or the sample)This is only the case if the characteristic has an upper tolerance limit.The number of decimal places can be predefined at the plant level.For each characteristic with a tolerance range you can define in the inspection plan how the share calculation is to be carried out. The share calculation depends on whether, for example, measured values or the share of nonconforming units should be confirmed.
tolerance range.public InspectionResult.InspectionResultBuilder inspRsltFrmtdAbvTolFraction(@Nullable String inspRsltFrmtdAbvTolFraction)
Original property name from the Odata EDM: InspRsltFrmtdAbvTolFraction
public InspectionResult.InspectionResultBuilder inspRsltBelowToleranceFraction(@Nullable Double inspRsltBelowToleranceFraction)
Original property name from the Odata EDM: InspRsltBelowToleranceFraction
The share is displayed in per cent. For example, 0.112 stands for a share of 11.2 per cent.The share of units for the characteristic or sample that is below the tolerance range is calculated if youselect the function for calculating the sharevaluate the characteristic (or the sample)close the characteristic (or the sample)This is only the case if the characteristic has a lower tolerance limit.The number of decimal places can be predefined at the plant level.For each characteristic with a tolerance range you can define in the inspection plan how the share calculation is to be carried out. The share calculation depends on whether, for example, measured values or the share of nonconforming units should be confirmed.
public InspectionResult.InspectionResultBuilder inspRsltFrmtdBelowTolFraction(@Nullable String inspRsltFrmtdBelowTolFraction)
Original property name from the Odata EDM: InspRsltFrmtdBelowTolFraction
public InspectionResult.InspectionResultBuilder inspResultVariance(@Nullable Double inspResultVariance)
Original property name from the Odata EDM: InspResultVariance
For inspection characteristics with single-value recording the system determines the standard deviation of the confirmed and valid measured values if youselect the function for calculating statistical moments --OR--valuate the inspection characteristic (partial sample)
measured values from the standard deviation you entered.public InspectionResult.InspectionResultBuilder inspResultFrmtdVariance(@Nullable String inspResultFrmtdVariance)
Original property name from the Odata EDM: InspResultFrmtdVariance
public InspectionResult.InspectionResultBuilder inspectionResultCatalog2(@Nullable String inspectionResultCatalog2)
Original property name from the Odata EDM: InspectionResultCatalog2
If you are processing a quantitative characteristic or a qualitative characteristic for which the characteristic attributes indicator is not set, you can assign up to 4 code groups or selected sets to describe the inspection characteristic or the inspection method.NOTEYou CANNOT assign selected sets from catalog type 1 to quantitative characteristics or to qualitative characteristics for which the characteristic attributes indicator is not set.
characteristic attributes, defect types, usage decisions).public InspectionResult.InspectionResultBuilder inspectionResultCatalog3(@Nullable String inspectionResultCatalog3)
Original property name from the Odata EDM: InspectionResultCatalog3
If you are processing a quantitative characteristic or a qualitative characteristic for which the characteristic attributes indicator is not set, you can assign up to 4 code groups or selected sets to describe the inspection characteristic or the inspection method.NOTEYou CANNOT assign selected sets from catalog type 1 to quantitative characteristics or to qualitative characteristics for which the characteristic attributes indicator is not set.
characteristic attributes, defect types, usage decisions).public InspectionResult.InspectionResultBuilder inspectionResultCatalog4(@Nullable String inspectionResultCatalog4)
Original property name from the Odata EDM: InspectionResultCatalog4
If you are processing a quantitative characteristic or a qualitative characteristic for which the characteristic attributes indicator is not set, you can assign up to 4 code groups or selected sets to describe the inspection characteristic or the inspection method.NOTEYou CANNOT assign selected sets from catalog type 1 to quantitative characteristics or to qualitative characteristics for which the characteristic attributes indicator is not set.
characteristic attributes, defect types, usage decisions).public InspectionResult.InspectionResultBuilder inspectionResultCatalog5(@Nullable String inspectionResultCatalog5)
Original property name from the Odata EDM: InspectionResultCatalog5
If you are processing a quantitative characteristic or a qualitative characteristic for which the characteristic attributes indicator is not set, you can assign up to 4 code groups or selected sets to describe the inspection characteristic or the inspection method.NOTEYou CANNOT assign selected sets from catalog type 1 to quantitative characteristics or to qualitative characteristics for which the characteristic attributes indicator is not set.
characteristic attributes, defect types, usage decisions).public InspectionResult.InspectionResultBuilder inspectionResultCode2(@Nullable String inspectionResultCode2)
Original property name from the Odata EDM: InspectionResultCode2
The code can be uniquely identified only with the catalog type and code group.
the actual coding for the attribute. For example, in a code group of colors, the code BL can represent the color blue, GR can represent the color green, and so forth.public InspectionResult.InspectionResultBuilder inspectionResultCode3(@Nullable String inspectionResultCode3)
Original property name from the Odata EDM: InspectionResultCode3
The code can be uniquely identified only with the catalog type and code group.
the actual coding for the attribute. For example, in a code group of colors, the code BL can represent the color blue, GR can represent the color green, and so forth.public InspectionResult.InspectionResultBuilder inspectionResultCode4(@Nullable String inspectionResultCode4)
Original property name from the Odata EDM: InspectionResultCode4
The code can be uniquely identified only with the catalog type and code group.
the actual coding for the attribute. For example, in a code group of colors, the code BL can represent the color blue, GR can represent the color green, and so forth.public InspectionResult.InspectionResultBuilder inspectionResultCode5(@Nullable String inspectionResultCode5)
Original property name from the Odata EDM: InspectionResultCode5
The code can be uniquely identified only with the catalog type and code group.
the actual coding for the attribute. For example, in a code group of colors, the code BL can represent the color blue, GR can represent the color green, and so forth.public InspectionResult.InspectionResultBuilder inspectionResultCodeGroup2(@Nullable String inspectionResultCodeGroup2)
Original property name from the Odata EDM: InspectionResultCodeGroup2
public InspectionResult.InspectionResultBuilder inspectionResultCodeGroup3(@Nullable String inspectionResultCodeGroup3)
Original property name from the Odata EDM: InspectionResultCodeGroup3
public InspectionResult.InspectionResultBuilder inspectionResultCodeGroup4(@Nullable String inspectionResultCodeGroup4)
Original property name from the Odata EDM: InspectionResultCodeGroup4
public InspectionResult.InspectionResultBuilder inspectionResultCodeGroup5(@Nullable String inspectionResultCodeGroup5)
Original property name from the Odata EDM: InspectionResultCodeGroup5
public InspectionResult.InspectionResultBuilder inspectionPartialSampleSize(@Nullable Short inspectionPartialSampleSize)
Original property name from the Odata EDM: InspectionPartialSampleSize
If partial samples are defined for an inspection characteristic, the system creates the predefined number of samples when the characteristic is processed.With the options in the 'Goto' menu you can access the next sample and you can navigate to all the other samples for the inspection characteristic. Furthermore, when you have reached the last partial sample created for the characteristic, you can create a new partial sample for the characteristic with the function 'Next sample'. The system adds a partial sample to the number of already existing partial samples.In the sampling procedure assigned to the inspection characteristic in the inspection plan, you can plan the use of partial samples. In addition, you can define the number of partial samples to be created in the procedure.
public InspectionResult.InspectionResultBuilder inspectionStartDate(@Nullable LocalDateTime inspectionStartDate)
Original property name from the Odata EDM: InspectionStartDate
public InspectionResult.InspectionResultBuilder inspectionStartTime(@Nullable LocalTime inspectionStartTime)
Original property name from the Odata EDM: InspectionStartTime
public InspectionResult.InspectionResultBuilder inspectionEndDate(@Nullable LocalDateTime inspectionEndDate)
Original property name from the Odata EDM: InspectionEndDate
public InspectionResult.InspectionResultBuilder inspectionEndTime(@Nullable LocalTime inspectionEndTime)
Original property name from the Odata EDM: InspectionEndTime
public InspectionResult.InspectionResultBuilder createdByUser(@Nullable String createdByUser)
Original property name from the Odata EDM: CreatedByUser
The system automatically enters the user name.
public InspectionResult.InspectionResultBuilder creationDate(@Nullable LocalDateTime creationDate)
Original property name from the Odata EDM: CreationDate
The system enters the current system date.
public InspectionResult.InspectionResultBuilder lastChangedByUser(@Nullable String lastChangedByUser)
Original property name from the Odata EDM: LastChangedByUser
public InspectionResult.InspectionResultBuilder lastChangeDate(@Nullable LocalDateTime lastChangeDate)
Original property name from the Odata EDM: LastChangeDate
The system enters the current system date.
public InspectionResult.InspectionResultBuilder changedDateTime(@Nullable ZonedDateTime changedDateTime)
Original property name from the Odata EDM: ChangedDateTime
To standardize local times in a UTC time stamp and thus make them comparable with other times, these local times
need to be converted using your time zone and the ABAP command convert.Even if the system is able to determine
the time zone from Customizing or master data, you shoul save the time zone redundantly here.The internal
structure of the UTC time stamp is subdivided into a date part and a time part in packed number format
public InspectionResult build()
Copyright © 2019 SAP SE. All rights reserved.