Entering content frameProcedure documentation Pipeline Settings Locate the document in its SAP Library structure

Use

For each pipeline of the Integration Engine, you can make different settings that are not evaluated until runtime. You can check and change these settings at any point.

Prerequisites

In the Integration Engine menu you chose Configuration ® Pipeline Settings, and are now on the screen Pipeline Settings: Display.

Procedure

To display the settings for a pipeline, proceed as follows:

  1. Use the tab page Pipeline Settings from the input help for the field Pipeline ID to select a pipeline. Choose Enter to display the selected pipeline.
  2. Choose Display <-> Change (This graphic is explained in the accompanying text) to enter change mode and change the pipeline settings in the group box with the same name, if required.

You can change the settings for logging and trace level for each pipeline here.

1 means that logging is activated and 0 that it is deactivated. An empty input field means that the setting for logging is to be defined at another location.

Level 0 means that no trace is activated, while level 3 means that maximum trace is activated.
  1. Save the pipeline after you have made your changes.
  2. Choose Other Pipeline (This graphic is explained in the accompanying text) if you want to select another pipeline and check its logging and tracing settings.

 

 

Leaving content frame