Example of Care Unit Aligned with SAP Coordinate System 
Example of Care Unit Aligned with SAP Coordinate System
The following illustration is an example of a care unit aligned with the SAP coordinate system.
To represent rooms and corridors in a care unit, you have to specify the x and y coordinates and the length (y-direction) and width (x-direction) for a building unit.
The rooms and corridors outlined in the above representation are defined with the following coordinates:
Building Unit |
(x,y) |
Width (x-axis) |
Length (y-axis) |
R11 |
(2,2) |
4 |
3 |
R12 |
(6,2) |
4 |
3 |
R13 |
(13,2) |
4 |
4 |
R14 |
(13,6) |
4 |
5 |
R15 |
(10,9) |
3 |
2 |
R16 |
(6,8) |
4 |
3 |
R17 |
(2,8) |
4 |
3 |
C01 |
(2,5) |
8 |
3 |
C02 |
(10,2) |
3 |
7 |
Bed location dimensions are predefined in the system (2x2 m). Consequently, you specify the position of bed locations only as a point in the coordinate system whose origin is in the lower left corner of the room or corridor to which the bed location is assigned.
The bed locations outlined in the above representation are defined with the following coordinates:
Bed Location |
(x,y) |
Bed 111 |
(0,0) |
Bed 112 |
(2,0) |
Bed 131 |
(2,2) |
Bed 132 |
(0,0) |
Bed 133 |
(2,0) |
Bed 141 |
(0,3) |
Bed 142 |
(2,3) |
Bed 143 |
(0,0) |
Bed 144 |
(2,0) |
Bed 161 |
(0,1) |
Bed 162 |
(2,1) |
Bed 171 |
(0,1) |
Bed 172 |
(2,1) |
The room door dimensions are predefined in the system (1 meter). Consequently, you specify the location of room doors only as a point in the coordinate system whose origin is the lower left corner of the corridor on which the door is located.
The room doors outlined in the above representation are defined with the following coordinates:
Room Doors |
(x,y) |
R11/C01 |
(2,0) |
R12/C01 |
(6,0) |
R16/C01 |
(6,3) |
R17/C01 |
(2,3) |
R13/C02 |
(3,2) |
R14/C02 |
(3,6) |
R15/C02 |
(1,7) |