Output of Dangerous Goods Data on Disposal Documents 

Purpose

This process describes the settings that you must make so that the dangerous goods data is output on a disposal document for a waste.

No dangerous goods checks take place in Waste Management, in other words, the system does not check, for example, whether the waste can be transported on the mode of transport.

Prerequisites

You have made the necessary settings in Customizing for Dangerous Goods Management. For more information about these settings, see the Waste Management Implementation Guide (IMG) under Configure Dangerous Goods Management for Waste Management.

Process Flow

...

       1.      You assign a dangerous goods indicator profile to the waste in the material master for which the Doc (document-relevant) indicator is set under Specify Indicator Profiles for the Material Master in Customizing for Dangerous Goods Management.

       2.      You enter or add data as required in the SAP Dangerous Goods Management component in order, for example, to map the relevant dangerous goods regulations. For more information, see Dangerous Goods Basic Data.

       3.      In the dangerous goods master for the waste, you enter the dangerous goods data for all relevant dangerous goods regulations. Note the following:

¡        Enter a text pattern for each dangerous goods regulation. For more information about text patterns, see Output of Dangerous Goods Information Using Text Patterns.

¡        The Non-Dangerous Goods Full Transport indicator cannot be set for a combination of a waste and regulation for which you want to output dangerous goods data on disposal documents.

       4.      On the Dangerous goods tab page in the disposal document, you enter the dangerous goods regulations that are relevant specifically for the transport of the waste for which the disposal document is required. The system uses these dangerous goods regulations to determine, from the dangerous goods regulations specified in the dangerous goods master, the dangerous goods data that is output on the disposal document. If the disposal document contains several wastes, the dangerous goods data is output in a separate item for each waste.

If you have assigned a waste approval to the disposal document, the system proposes the dangerous goods regulation that you specified in the waste approval for the dangerous goods regulation for the main leg in the disposal document.

Result

The dangerous goods data determined is displayed for each waste on the Dangerous goods tab page.

When you print the disposal documents, the dangerous goods data is output in the following areas using the sample templates supplied with the standard system:

Disposal Document Type	Dangerous Goods Data Output
BGS (German Begleitschein)	Remarks field
HWM (Hazardous waste manifest)	Waste item

The dangerous goods data is output using the same symbol.