Different variations of a hexagonal head screw are used as the material. In the columns to the right of the material, you see special features that are demonstrated in the processes. These special features, for example, the development of the supply relationship status, are only demonstrated for specific materials.

You can use the materials QS6Xxx to view Quality Management in Procurement.

The material QS6X20 is the basic variant for a procurement process with quality control.

The material QS6X40 demonstrates the development of the supply relationship status.

The material QS6X60 or the manufacturer part QS6X60-1001 is supplied by a distributor, who can only get the materials from an authorized manufacturer.

The materials QS8Xxx are used to examine the quality inspection in greater detail.

The material QS8X20 is the basic variant for an inspection using an inspection plan.

The material QS8X40 is used to demonstrate the material-dependent planning of inspection specifications.

The inspection scope of material QS8X60 and manufacturer part number QS8X60-1001 depends on both the distributor and manufacturer.

The materials QS8X30 and QS8X35 are used to demonstrate the quality management of batches.

The material QS8X30 is used to demonstrate the quality inspection of materials to be handled in batches. In this case, the batch quality characteristics become inspection characteristics, and the inspection results are used to classify batches and issue certificates for batch attributes on the quality certificate.

The material QS8X35 is used to demonstrate batch inspections that are performed for different reasons, for example, a source inspection in procurement or a recurring inspection during storage.

The vendor is usually vendor 1235.

Vendor 1234 is only required when demonstrating how German documents are created, for example, when printing a purchase order.

The vendors 1234 and 1235 – being distributors – may be required to get materials from vendor 1001, an authorized manufacturer.